SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    Flork's Lubrication Recommendation
Page 1 2 3 4 5 6 7 ... 30
Go
New
Find
Notify
Tools
Reply
  
Flork's Lubrication Recommendation Login/Join 
Member
posted Hide Post
Great thread! Im anxious to hear about the 1911 recomendations.


=====================================
"I no longer need to run as a Presidential Candidate for the Socialist Party. The Democratic Party has adopted our platform." - Norman Thomas 1944
 
Posts: 893 | Registered: December 15, 2008Reply With QuoteReport This Post
Learn it, know it, live it
Picture of 1lowlife
posted Hide Post
quote:
Originally posted by KevinCW:
Flork,

At what temps should you go to a lighter or heavier grease?


Kevin


Slide-Glide Lite (thin viscosity)

Applications:

30+ degrees F
All Firearms:
Centerfire Pistols: Non-compensated & Compensated
Rifles: All action types (including Lever Actions)
Shotguns: All action types
Revolvers (Internal action parts only - not for the cylinder)
.22's
"Carry Guns" Applied extremely sparingly (for maximum reliability)
Slide-Glide Lite's viscosity is blended specifically for "IPSC Open guns" in any temperature, and also works great on the Glock's "connector." (More details below.)


Slide-Glide Standard (medium viscosity)
Applications:

60+ degrees F
Semi-automatic, Centerfire:
Pistols (non-compensated)
Rifles
Shotguns
Slide-Glide Standard was originally blended for "stock-type" pistols in temperatures above 60 degrees. Its viscosity is a little too thick for compensated pistols, .22's, and revolvers.


Slide-Glide Heavy (heavy viscosity)

Applications:

80+ degrees F
Semi-automatic, Centerfire:
Pistols (non-compensated only!)
Pistols with "loose top ends" (Glocks, Sigs, etc.)
Slide-Glide Heavy's viscosity is specifically blended for pistols with "loose top ends" (frame to slide fit). In temperatures above 80 degrees, it also works well in non-compensated, centerfire pistols.

http://www.brianenos.com/pages/slide-glide.html
 
Posts: 4354 | Location: Great State of TEXAS | Registered: July 05, 2008Reply With QuoteReport This Post
Optimistic Cynic
Picture of architect
posted Hide Post
quote:
Originally posted by sig229steve:
Could you give a description of what you mean by "hydrolock"?


Sounds to me like informal shorthand for "hydraulic lock," ie. when a non-compressible substance gets into a place in a mechanism where it's designer expects there to be air, etc. The give is gone, the thrill goes too.


[hr style="border: 3px dashed navy;"]
"You know how I've always wanted to pretend to be an architect!" - George Costanza
Please don't waste your time looking for me on FaceBook, Twitter, or the like.
 
Posts: 6390 | Location: NoVA | Registered: July 22, 2009Reply With QuoteReport This Post
Banned
posted Hide Post
quote:
Originally posted by Flork:
Basically make it so goopy with extra lube that the slide doesn't run.

Grease attenuates slide velocity, so if you have enough of it in the mechanism it can slow the slide velocity enough to cause feeding issues.

If you were to completely fill every crevase of your gun with grease, you'd probably cause that to happen.


That's kinda what it sounded like, but I hadn't heard that term used with firearms before. I'd always heard it used with internal combustion engines.
 
Posts: 996 | Registered: June 08, 2009Reply With QuoteReport This Post
Not quite right
Picture of P220forever
posted Hide Post
I may grease my rails daintily, but I oil the bore with reckless abandon! Razz Razz Razz
 
Posts: 10026 | Location: Henderson, Nevada | Registered: January 02, 2009Reply With QuoteReport This Post
Banned
posted Hide Post
quote:
Originally posted by P220forever:
I may grease my rails daintily, but I oil the bore with reckless abandon! Razz Razz Razz


Are we talking about your pistol or your "gun"?!! Big Grin
 
Posts: 996 | Registered: June 08, 2009Reply With QuoteReport This Post
A Watchful Guardian
Picture of badkarma56
posted Hide Post
quote:
Originally posted by sig229steve:
quote:
Originally posted by P220forever:
I may grease my rails daintily, but I oil the bore with reckless abandon! Razz Razz Razz


Are we talking about your pistol or your "gun"?!! Big Grin


Big Grin



"If it's all the same to you, I'd really prefer to visit the range."
 
Posts: 7980 | Location: Houston, Texas | Registered: August 05, 2007Reply With QuoteReport This Post
Go Vols!
Picture of Oz_Shadow
posted Hide Post
Tried bacon grease yet ? You get to eat the bacon you know.

Damn, this thread made me hungry.

Cereal or something worse ...... hmm.......
 
Posts: 17869 | Location: SE Michigan | Registered: February 10, 2007Reply With QuoteReport This Post
Member
Picture of Flork
posted Hide Post
Oz,

YOu must have a serious case of A.D...........OOH Shiny


------------------------------
-------------------------------------------
Scott @ Apex
-------------------------------------------
"Own enough guns that your wife will never notice a gun or 2 being added or taken away from the collection."
Leonard Novak - "Thee Gambler" (SASS)
------------------------------------------------

My guides to Sig Lubrication: http://www.apextactical.com/bl...-sauer-pistol-rails/

http://www.apextactical.com/bl...nternal-lubrication/
 
Posts: 3489 | Location: Apex Tactical Specialties - Peoria, AZ | Registered: June 01, 2005Reply With QuoteReport This Post
Member
Picture of Stinky Bojangles
posted Hide Post
quote:
The Grey grease I've been playing with recently is a mixture of a couple of industrial lubricants that I've had very good success with so far.


I will buy this! Big Grin

Mr. Flork, by any chance, any experimentation with Weapon Shield products, specifically their grease?
 
Posts: 816 | Location: was:NoVA now:Lake Caroline | Registered: July 28, 2005Reply With QuoteReport This Post
Member
Picture of Tazman2
posted Hide Post
quote:
Originally posted by quattro_joe:
FWIW, I use brian enos slide glide, or super lube, which is a synthetic grease that has an operating temperature of -45 to +450 degrees. So far I am pretty happy with it, and use it on my carry gun.


I also use slide glide lite on ALL my guns. My AK, Sig and my carry Glock 26 with its sloppy top. I know their website says to use the heavy but I figured since most people use oil anyways and hardly have issues so in this case grease period > oil. I figure why complicate it and go heavy and take the chance of it locking up the gun when needed especially since I hardly ever fire it past the initial 400ish rounds and is strictly carry now! Smile


--------------------------------------

Guns? Ammo? Never heard of em!
 
Posts: 1091 | Location: CT | Registered: November 23, 2007Reply With QuoteReport This Post
Banned
posted Hide Post
Flork what do you think of Mil-Comm TW-25
 
Posts: 1606 | Location: Georgia | Registered: December 31, 2005Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by Stinky Bojangles:
quote:
The Grey grease I've been playing with recently is a mixture of a couple of industrial lubricants that I've had very good success with so far.


I will buy this! Big Grin

Mixing finished lubricant products should be done carefully. There are many components to a lube and they are ballanced to work together.

Corrosion inhibitors, anti-wear, friction modifiers, extreme pressure adds, certain base oils...all compete with each other for attachement to the surface of the metal. If you mix in chemistries that are not designed to work together, you can wind up with inferior results. Finished lube products are put together with all of these things in mind.

quote:
Interactions among surface-active additives can lead to less-than-expected lubricant performance.

http://www3.interscience.wiley...l/112469509/abstract


TEMPEST
 
Posts: 1071 | Location: Las Vegas Nv | Registered: May 12, 2005Reply With QuoteReport This Post
Chilihead and Barbeque Aficionado
Picture of 2Adefender
posted Hide Post
Thanks for the great post Flork. I've recently become a convert to Slide Glide, after using FP-10 oil on the rails for years. I noticed the oil dries out after a while, but the grease just stays where you put it.

I'll be interested in your other lube recommendations for internal parts.


_________________________
2nd Amendment Defender

The Second Amendment is not about hunting or sport shooting.
 
Posts: 10487 | Location: FL | Registered: December 29, 2003Reply With QuoteReport This Post
Member
Picture of rimler
posted Hide Post
Thanks for the post. Very informational.


"Si Vis Pacem, Para Bellum".
("If you wan't peace, prepare for war")
- Flavius Vegetius Renatus
 
Posts: 217 | Location: NE Ohio | Registered: December 28, 2008Reply With QuoteReport This Post
Banned
posted Hide Post
quote:
Originally posted by 2Adefender:
Thanks for the great post Flork. I've recently become a convert to Slide Glide, after using FP-10 oil on the rails for years. I noticed the oil dries out after a while, but the grease just stays where you put it.

I'll be interested in your other lube recommendations for internal parts.


You want to see an oil that is equal to grease in stay put and superior in lubrication? Try Prolix XTra-T. I've been trying a lot of stuff and it beats anything I've seen. I've sent some to Flork at my expense (I'm in no way affiliated with Prolix) and he's going to check it out. I'm betting he'll be as impressed as I have been when he uses it. Check it out here: Prolix product info
 
Posts: 996 | Registered: June 08, 2009Reply With QuoteReport This Post
Vote the
BASTIDS OUT!
Picture of yanici
posted Hide Post
You guys are making me nervous. I just sent in an order for $100 worth of the Slip 2000 EWL and EWG. Gonna take me a while to use it up. It better be good! Smile


John

"Building a wall will violate the rights of millions of illegals." [Nancy Pelosi]
 
Posts: 2400 | Location: N.E. Massachusetts | Registered: June 05, 2009Reply With QuoteReport This Post
Banned
posted Hide Post
quote:
Originally posted by yanici:
You guys are making me nervous. I just sent in an order for $100 worth of the Slip 2000 EWL and EWG. Gonna take me a while to use it up. It better be good! Smile

I just took a look on their site. That shit is expensive! And I thought the Prolix and Gun Butter was expensive.
 
Posts: 996 | Registered: June 08, 2009Reply With QuoteReport This Post
Banned
posted Hide Post
Flork , what about TW-25b grease ? I use it in abundance in all my pistols and my rifles, AR-15 and VZ-58 ... On the rifles, particularly I found out that it doesn`t allow the powder residue to stick to the chamber and the interior , so it is very easy to clean the rifles after a shooting session . No wonder the military uses the stuff ...!!!
 
Posts: 324 | Registered: January 05, 2008Reply With QuoteReport This Post
A Watchful Guardian
Picture of badkarma56
posted Hide Post
quote:
Originally posted by josey:
Flork , what about TW-25b grease ? I use it in abundance in all my guns .


+1, that fact that it comes in a syringe makes it even better!

-BK



"If it's all the same to you, I'd really prefer to visit the range."
 
Posts: 7980 | Location: Houston, Texas | Registered: August 05, 2007Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2 3 4 5 6 7 ... 30 
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    Flork's Lubrication Recommendation

© SIGforum 2024