SIG-Sauer announces the P220 10mm

Excam_Man

Member

posted

quote:
Originally posted by TxMark:
quote:
Originally posted by burnetma:
quote:
Originally posted by TexasRaider:

*THAT* pistol in DA/SA would truly be, The Great White Buffalo...

+1

+ 2

Mark

Also, swap grips to G10's. Maybe lose the beaver tail.

Oh Yeah!

Posts: 10062 | Registered: October 15, 2008

Ignored post by Excam_Man posted

BRL

Loves His Wife
Picture of BRL

posted

I'm VERY anxious to compare the SAO trigger on this to my P220 Carry SAO which I'd say has a good trigger on it and is fairly crisp and light but I think certainly could be improved upon by removing the excessive take up / free play. I don't expect it to compare to my Fusion 1911, but as I said, I'm excited to see if it's improved over the carry.

I am not BIPOLAR. I don't even like bears.

Posts: 12972 | Location: Western WI | Registered: January 05, 2009

Ignored post by BRL posted

Gary1911A1

Member

posted

quote:
Originally posted by Tom Gresham:
We just finished the video about the GT20 version of the P220 in 10mm. Nice closeup shots (no drooling!). This gun shoots well. A whole lot better than I did. Didn't even adjust the sights. Just shot it straight out of the box. I'll tweak it, since it appears to be just a tad high and left for me.
Nice review. Thanks for posting your results.
Hope you enjoy the "gun porn."

www.youtube.com/watch?v=9MKrAHGFBn8

Posts: 527 | Location: Southern Ohio for now. | Registered: December 27, 2007

Ignored post by Gary1911A1 posted

Member

posted

Hey guys,
Just wanted to clarify the specs on the three 5" guns we will be doing. The reverse two-tone DA/SA model will have fixed night sights. The SAO natural stainless & rosewood grip and the SAO Nitron & G10 model will have adjustable rear sights with white dot (contrast) front sight. Initially, the sight setups were swapped, but feedback from SHOT Show at both Sig's and our booth indicated that the majority of people wanted adjustable sights on the SAO models and fixed sights on the DA/SA. Later in the year we should have two 4.4" DA/SA models one in Nitron and the other natural stainless that will both have fixed night sights.

Thanks,

Jason Cloessner
Lipsey's

Posts: 12 | Registered: March 04, 2015

Ignored post by Jason at Lipsey's posted

parabellum

Peace through
superior firepower

posted

Thanks, Jason, and welcome.

Posts: 109737 | Registered: January 20, 2000

Ignored post by parabellum posted

Member

posted

Hi Jason,

Great news. Thank you very much for posting.

I was especially pleased to read: "The reverse two-tone DA/SA model will have fixed night sights."

YUM ! ! !

Is this still the correct link ( http://www.lipseys.com/itemdet...emno=SI220R510RTASMS ), please ?

Posts: 4918 | Registered: June 06, 2012

Ignored post by ersatzknarf posted

bigpond73

SIGforum's Indian
Off the Reservation
Picture of bigpond73

posted

quote:
Originally posted by Jason:

Later in the year we should have two 4.4" DA/SA models one in Nitron and the other natural stainless that will both have fixed night sights.

Thanks,

Jason Cloessner
Lipsey's

That's what I'm talking about

Welcome to the forum

Mike

You can run, but you cannot hide.

If you won't stand behind our troops, feel free to stand in front of them.

Posts: 4964 | Location: Southern Colorado | Registered: January 01, 2003

Ignored post by bigpond73 posted

parabellum

Peace through
superior firepower

posted

Just look at all that 10mm goodness coming our way, guys.

Posts: 109737 | Registered: January 20, 2000

Ignored post by parabellum posted

Member

posted

Very excited !

Posts: 4918 | Registered: June 06, 2012

Ignored post by ersatzknarf posted

Sugarwater

Member

posted

quote:
Originally posted by Jason at Lipsey's:
Initially, the sight setups were swapped, but feedback from SHOT Show at both Sig's and our booth indicated that the majority of people wanted adjustable sights on the SAO models and fixed sights on the DA/SA.

Thank you for this update!

I think that Sig got this right, and I am appreciative of them responding to their customers. That is a great sign that goes beyond this project alone.

Posts: 365 | Location: Austin, Texas | Registered: April 26, 2012

Ignored post by Sugarwater posted

Member

posted

quote:
Originally posted by ersatzknarf:
Hi Jason,

Great news. Thank you very much for posting.

I was especially pleased to read: "The reverse two-tone DA/SA model will have fixed night sights."

YUM ! ! !

Is this still the correct link ( http://www.lipseys.com/itemdet...emno=SI220R510RTASMS ), please ?

The pic in that link is correct. I am waiting on new pics for the other two to update the correct image for them.

Posts: 12 | Registered: March 04, 2015

Ignored post by Jason at Lipsey's posted

Member

posted

quote:
Originally posted by parabellum:
Thanks, Jason, and welcome.

Thank you Parabellum. You guys have a great site here and a wealth of information.

Posts: 12 | Registered: March 04, 2015

Ignored post by Jason at Lipsey's posted

rubicant5x

Member

posted

quote:
Originally posted by Jason at Lipsey's:
Hey guys,
Just wanted to clarify the specs on the three 5" guns we will be doing. The reverse two-tone DA/SA model will have fixed night sights. The SAO natural stainless & rosewood grip and the SAO Nitron & G10 model will have adjustable rear sights with white dot (contrast) front sight. Initially, the sight setups were swapped, but feedback from SHOT Show at both Sig's and our booth indicated that the majority of people wanted adjustable sights on the SAO models and fixed sights on the DA/SA. Later in the year we should have two 4.4" DA/SA models one in Nitron and the other natural stainless that will both have fixed night sights.

Thanks,

Jason Cloessner
Lipsey's

Do you have an ETA?

Posts: 6 | Registered: January 12, 2015

Ignored post by rubicant5x posted

Member

posted

quote:
Originally posted by Jason at Lipsey's:
The pic in that link is correct. I am waiting on new pics for the other two to update the correct image for them.

Thank you.

Please will you post the links, when they are ready?

Really appreciate you letting us know all the good news

Posts: 4918 | Registered: June 06, 2012

Ignored post by ersatzknarf posted

Member

posted

I will post the links when they are updated. Sig is saying we should start seeing guns in April.

Posts: 12 | Registered: March 04, 2015

Ignored post by Jason at Lipsey's posted

Member

posted

Wonderful, thank you !

Posts: 4918 | Registered: June 06, 2012

Ignored post by ersatzknarf posted

Georgeair

thin skin can't win
Picture of Georgeair

posted

quote:
Later in the year we should have two 4.4" DA/SA models one in Nitron and the other natural stainless that will both have fixed night sights.

HELL YEAH! That's what I'm looking for!

_{You only have integrity once. - imprezaguy02}

Posts: 12852 | Location: Madison, MS | Registered: December 10, 2007

Ignored post by Georgeair posted

rubicant5x

Member

posted

quote:
Originally posted by Jason at Lipsey's:
I will post the links when they are updated. Sig is saying we should start seeing guns in April.

NICE!!

Posts: 6 | Registered: January 12, 2015

Ignored post by rubicant5x posted

BRL

Loves His Wife
Picture of BRL

posted

quote:
Originally posted by Jason at Lipsey's:
Hey guys,
Just wanted to clarify the specs on the three 5" guns we will be doing. The reverse two-tone DA/SA model will have fixed night sights. The SAO natural stainless & rosewood grip and the SAO Nitron & G10 model will have adjustable rear sights with white dot (contrast) front sight. Initially, the sight setups were swapped, but feedback from SHOT Show at both Sig's and our booth indicated that the majority of people wanted adjustable sights on the SAO models and fixed sights on the DA/SA. Later in the year we should have two 4.4" DA/SA models one in Nitron and the other natural stainless that will both have fixed night sights.

Thanks,

Jason Cloessner
Lipsey's

Welcome Jason

Should I anticipate any issues with the order I have in for the Stainless SAO Rosewood that was originally spec'd with night sights (Sig took away some of my sprinkles

)
My dealer ordered the spec I sent him from your website as well as a RTT DA/SA I believe for stock. Here is the spec I sent him -

SI220R510SSESAO
P220 SS ELITE 10MM SAO 5" NS
220R5-10-SSE-SAO|ROSEWOOD GRPS
10mm
UPC: 798681517626 MFG MDL #: 220R5-10-SSE-SAO

Also, is there a way for my dealer to find out how far down the list he is for delivery from Lipsey's?

For anyone else in the know, do we know if the grips on these pistols are interchangeable with the .45 P220s?

I am not BIPOLAR. I don't even like bears.

Posts: 12972 | Location: Western WI | Registered: January 05, 2009

Ignored post by BRL posted