was given a Lee hand press. time to start learning

Scored 7k Tula small rifle primers for $140.

Worked on Reloading Inventory some more. This app is going to be the death of me, I swear. But it's kind of fun, so I really don't mind. It's starting to pick up steam, too. Averaging just over 3 installs per day. It's interesting looking at the purchase console. It shows you the zip code of the purchaser. I can clearly see guys downloading it, and then telling their buddies, because the following day there will be one or two downloads from nearby zip codes. Love it!

Spent two hours until I could not take it any longer, sorting 9mm brass so as to sort out crimped brass from uncrimped........UGH

Moved all the brass I'd been collecting and I'd been given into pails and freezer bags (in pails). Broke-down and placed in the recycle bin all the cardboard. Bundled-up and tossed all the styrofoam round holders. Moved all the reloading gear I'd been gifted into plastic storage bins (for now) and racked 'em. Broke-down the boxes, prepared them for the recycle bin. Cleaned everything up.

Did more reloading research

(Some day I plan to actually, you know, start reloading...)

Burned 2175 grains of Varget. F Class practice.

RMD

Scored 40# of Varget from a local-ish place.

200 rds of 124gr 9mm atop 4.4 gr of Titegroup.

Taking the wife shooting tomorrow.

Made 50 rands of 243 with Winchester brass, CCI primers, Sierra 95gr SMK and had to use some Hybrid 100V cause I ran outta Varget. Hope this powder works well.

Gotta wait until Monday when I get a day off to go shoot it.

Loaded up 200 rounds of .45 ACP, 185gr LSWC on top of 4.1gr Bullseye, CCI Large Pistol Primer.

Will come close to giving me enough ammo to finish the indoor season of 50' National Gallery Match.

Just clean 3 lb coffee can of 38 special. Will fill with 3.5 grains of w231 and top off with Bayou 158 SWC. Seams to work well out of my 638 J frame.

I cleaned off some of my bench. THAT was long overdue!

Now I can go back to sorting brass.

Deprimed, sonic cleaned, neck bump/collet sized, trimmed, deburred/chamfered, neck uniformed, media tumbled and annealed 100 .308 Lapua's.

Loaded up 500 Berry's 124 gr RN plated bullets in 9mm.

Yesterday, loaded 500 Xtreme 225 gr FP plated bullets in .45 acp for my CZ 97B

Loaded up 500 .45 ACP with 200 gr LRN on the 550 today. A friend hasn't yet put his bench together, so after watching him struggle with getting anything done, I sent him home and cranked 'em. LOL, he was kinda in the way of my being able to finish some indoor pistol loads.

Loaded up 500rds of Precision Delta 9MM 147gr FMJ-TC for range use. Hoping to send some downrange this weekend.

made up some 223 ammo (bolt gun stuff)

last week I tried annealing 50 pieces of brass (same LC lot)they were already cleaned by SS pin tumbling

then I sized them and trimmed them

yesterday I primed them and set them to the side

today I dumped some powder in them and topped them off with Sierra Game Kings 55gr

Ordered some polymer coated .357 bullets.

https://sigforum.com/eve/forums...0601935/m/3450005914

Reloaded 450rds 9mm 124gr Xtreme bullets with 4.1grs of Bullseye.

Loaded 500 rounds of 147gr RMR plated match subsonics for suppressor work tomorrow morning with my daughter. Titegroup 3.3gr

Also loaded 50 rounds of each below to test in my competition G34:
RMR 124gr FMJ
RMR 124gr RN plated
RMR 124gr RN plated match

Loaded 120 ackley rounds for a local match tomorrow. Short range, farthest target is about 780. Supposed to be 60 degrees, and 5mph wind. I can't wait!