Go | New | Find | Notify | Tools | Reply |
Member |
$2k is way too rich for my blood. If GG can get Sig to produce factory P320 10s I'd definitely jump on that. | |||
|
Member |
Unless I am mistaken it appears the $2k figure would be the cost of the custom pistol described in the contest in the text above. It is not the cost of the newly introduced P320 10mm that the thread is about. | |||
|
Behold my Radiance! |
Hello! Yes, we debuted our 10mm P320 demonstrators on Monday at SIG Range Day, where it was fired by my friends at SIG SAUER. We began noodling around with the concept immediately after being brought in on the P320 competition and promotion project, in late 2014. At that time, I simply reamed a .40 barrel, slapped it into a stock .40 slide on a .45 FCU, and blasted away to see what would break first. Hilarity ensued. There were some significant challenges to overcome. With everything else going on at Grayguns, this took time and a final, dedicated “screw this, we’re doing it NOW” push to sort out. Let it be understood that it’s easy enough to make one of anything, and make it more-or-less work. I fully grasp this. Our present task is to translate and adapt our working mechanics into our production model. Fortunately, my Production Director Jordon Castro has built that model in parcelled with our test demonstrators. Our date for easy-to-ship availability of complete GGI 320-10’s now just hinges on fulfilling a few last bits. You’ll see a new grip module. Our carrying case is being designed. The mags are going into production by SIG, and we’re waiting for the new Romeo2 RDS which we tested on our blower to become available. It’s looking like May. To assure success, we will be implementing a hard-commitment queue shortly, and Steve and I will keep everyone informed of our progress. This is one of several new products we’ve designed for GGI production lately. It’s a great time for us, and I’m super proud of my people. They have knocked the 10mm, P210 Bruiser and our Cafe Racer concepts out of the park. Thank you all for your patience and faith. -Bruce Designer and custom pistolsmith at Grayguns Inc. Privileged to be R&D consultant to the world's greatest maker of fine firearms: SIG SAUER Visit us at http://opspectraining.com/product-cat/videos/ to order yours, and Thank You for making GGI the leader in custom SIG and HK pistolsmithing and high-grade components. Bruce Gray, President Grayguns Inc. Grayguns.com / 888.585.4729 | |||
|
Tenacious Tempestuous with Integrity |
Thanks for the update Bruce.I am very intrigued by this 320 10mm project. For myself and I am sure for many other Sig and 10mm fans here- When will we find out how much one of these fine pistols is going to cost? Thanks for your time and consideration. | |||
|
Behold my Radiance! |
Thanks! In a world where shops get $2500 for a Glock bro build, my 10’s will be an excellent value. They just won’t be cheap. Designer and custom pistolsmith at Grayguns Inc. Privileged to be R&D consultant to the world's greatest maker of fine firearms: SIG SAUER Visit us at http://opspectraining.com/product-cat/videos/ to order yours, and Thank You for making GGI the leader in custom SIG and HK pistolsmithing and high-grade components. Bruce Gray, President Grayguns Inc. Grayguns.com / 888.585.4729 | |||
|
Member |
At the risk of thread drift, I'd love to hear more about this and whether some of parts will be hitting the market. The P22x rowel hammer is of interest as well. ------------ SP2022 - 9mm | |||
|
Behold my Radiance! |
Thank you for asking! It’s long been my objective to fill out our line to encompass upgrade components for every important SIG SAUER and SIG pistol. With the introduction of P210 and SP2022 components, very close to achieving this. The P210 platform is near and dear to my heart. As my training and experience in that pistol goes back four decades, I’m kind of a unicorn, and I’m happy we finally have a full suite of practical, ultraprecision upgrades for them. This includes our short-reset hammer, sear and trigger system, ergonomically enhanced slide lock lever, extended and improved manual safety, three styles of extended mag release, and our 360 degree magazine funnel with +2 base pads. Together, they change the character of the Legend or P210A completely, transforming these into real, no-holds-barred competitive pistols. I adapted that classic rowel hammer style we designed for the P-Series over to the P210. We needed a proper hammer with improved features anyhow, so why not make one which actually confirms to the beaver tail hammer pocket? If I may say so, I’m extremely pleased with these. I’ll post all sorts of pics when I get back to our main shops tomorrow. Thanks again! -Bruce Designer and custom pistolsmith at Grayguns Inc. Privileged to be R&D consultant to the world's greatest maker of fine firearms: SIG SAUER Visit us at http://opspectraining.com/product-cat/videos/ to order yours, and Thank You for making GGI the leader in custom SIG and HK pistolsmithing and high-grade components. Bruce Gray, President Grayguns Inc. Grayguns.com / 888.585.4729 | |||
|
Member |
Bruce - thanks for the response, much appreciated. Looking forward to hearing more about both the P210 and SP2022 products. Regarding the rowel hamer...is this something we'll see released for the P22x lines? ------------ SP2022 - 9mm | |||
|
Tenacious Tempestuous with Integrity |
TTT. Patiently waiting for more pertinent info regarding when the GG 320 10 will be ready, and the price. Thanks. | |||
|
Step by step walk the thousand mile road |
Bruce, you are a unicorn, since God broke the mold after bringing you to the Earth. You can put me down for a P320 in 10mm Auto. Nice is overrated "It's every freedom-loving individual's duty to lie to the government." Airsoftguy, June 29, 2018 | |||
|
As Extraordinary as Everyone Else |
Subscribed and very interested...what ever the price! ------------------ Eddie Our Founding Fathers were men who understood that the right thing is not necessarily the written thing. -kkina | |||
|
Biochemical Superfreak |
Interesting! Maybe we'll see an X-series grip frame for the .45/10mm now! Wanted one for my .45 ever since I saw the first 320 X-Five. 115 + 115 = 230 | |||
|
Behold my Radiance! |
I believe you will. We’re also working on our higher-end product. Great options are coming! -Bruce Designer and custom pistolsmith at Grayguns Inc. Privileged to be R&D consultant to the world's greatest maker of fine firearms: SIG SAUER Visit us at http://opspectraining.com/product-cat/videos/ to order yours, and Thank You for making GGI the leader in custom SIG and HK pistolsmithing and high-grade components. Bruce Gray, President Grayguns Inc. Grayguns.com / 888.585.4729 | |||
|
Powered by Social Strata | Page 1 2 |
Please Wait. Your request is being processed... |