SIGforum.com    Main Page  Hop To Forum Categories  The Mason-Howe Rifle Room    From the WTF files... Bubba strikes again!
Go
New
Find
Notify
Tools
Reply
  
From the WTF files... Bubba strikes again! Login/Join 
Yeah, that M14 video guy...
Picture of benny6
posted
I feel so bad for this guy. He's active duty military and had a "gunsmith" in Kentucky re-barrel his M1A with a Fulton barrel and install a Knight's Armament handguard and install the action into a custom ordered McMillan. He said he was getting over 8 MOA with the rifle.

So... the McMillan was never bedded.....

And.... the "gunsmith" tried to install a stock liner and hogged out a bunch of fiberglass for a stock liner, then abandoned the idea and just dropped the action into the stock with all the fiberglass missing...


The back of the bolt battered the McMillan


Excessive stock routing and dried epoxy where a stock liner was supposed to be...




Absolutely no material holding the action into the stock...


They even installed the rear sling swivel backwards...


I'm going to contact McMillan and see if they can expedite a repair on the stock so I can get it bedded before he PCS's

Tony.


Owner, TonyBen, LLC, Type-07 FFL
www.tonybenm14.com (Site under construction).
e-mail: tonyben@tonybenm14.com
 
Posts: 6061 | Location: Auburndale, FL | Registered: February 13, 2001Reply With QuoteReport This Post
I'd rather be hated for who I am than loved for who I am not
posted Hide Post
There are some really good M1A/M14 smiths out there. I dont know why you would pay top dollar for parts and get some random stranger the responsibility to put it all together ! trying to save money? no idea!
 
Posts: 8377 | Location: Bismarck ND | Registered: February 19, 2003Reply With QuoteReport This Post
Freethinker
Picture of sigfreund
posted Hide Post
People don’t know what they don’t know.

I used to have an entire rant about “professional” gunsmiths that was based on the fact that for years gun owners were told “Don’t do it yourself, let a professional do it right.” As I’ve said before, I thank the incompetents who convinced me that I could do it as well, and probably better, than many of the ones with a sign on the door—and I was right.

There are obvious exceptions, and some very good exceptions, and they’re the ones with waiting lists for months, or longer. But how does someone who is just starting out with a project in mind know who the butchers are? That’s probably easier to determine today than decades ago, but some of the ones that convinced me to learn how to do things myself had good reputations, and at least one was known nationally.

And even today gun parts are often accompanied with warnings that they should be installed only by professionals, and many people will assume that’s true. Regardless of what some of us may believe, not everyone knows or even should know everything we do.

I am, however, curious who some of the “really good” M1A/M14 smiths are (other than an obvious one whom we know and respect).

A few years ago I was reading that the number who could do good work on the rifles was declining rapidly. And then …. I contacted one about rebarreling my M1A. His response was about using a top level match barrel with (IIRC) tight chamber, and when I said I just wanted a decent new replacement for my badly pitted GI barrel to shoot military grade ammo, and not to win competitions, I never heard from him again.
(It’s just as well that I never pursued the project further because the gun shoots as well as I need it to.)




“Most men … can seldom accept the simplest and most obvious truth if it … would oblige them to admit the falsity of conclusions … which they have woven, thread by thread, into the fabrics of their lives.”
— Leo Tolstoy
 
Posts: 50200 | Location: 10,160 Feet Above Sea Level in Commirado | Registered: April 04, 2002Reply With QuoteReport This Post
Frangas non Flectes
Picture of P220 Smudge
posted Hide Post
I would be unbelievably pissed. I hope McMillan can fix it.


______________________________________________
"If the truth shall kill them, let them die.”

"A man who does not read has no appreciable advantage over a man who cannot read."
 
Posts: 19376 | Location: Sonoran Desert | Registered: February 10, 2011Reply With QuoteReport This Post
Member
posted Hide Post
Ugh. I have very good 'smiths do this type of work for me, so I'm no expert. But it looks like time for a new stock.
 
Posts: 8550 | Location: Colorado | Registered: January 26, 2008Reply With QuoteReport This Post
I have not yet begun
to procrastinate
posted Hide Post
Yeah…by the time Mac fixes that stock, it’s probably less expensive to buy another one.


--------
After the game, the King and the pawn go into the same box.
 
Posts: 4606 | Location: Central AZ | Registered: October 26, 2006Reply With QuoteReport This Post
Yeah, that M14 video guy...
Picture of benny6
posted Hide Post
The stock can be salvaged. I'll make sure of it. Worst case scenario, it gets painted after repair. He waited 6 months for the stock to be custom made when he ordered it 10 years ago.

Tony.


Owner, TonyBen, LLC, Type-07 FFL
www.tonybenm14.com (Site under construction).
e-mail: tonyben@tonybenm14.com
 
Posts: 6061 | Location: Auburndale, FL | Registered: February 13, 2001Reply With QuoteReport This Post
Yeah, that M14 video guy...
Picture of benny6
posted Hide Post
I just checked headspace. It's 0.010" short. Probably 1.620".

The KY smith couldn't even headspace the barrel properly.

Tony.


Owner, TonyBen, LLC, Type-07 FFL
www.tonybenm14.com (Site under construction).
e-mail: tonyben@tonybenm14.com
 
Posts: 6061 | Location: Auburndale, FL | Registered: February 13, 2001Reply With QuoteReport This Post
Frangas non Flectes
Picture of P220 Smudge
posted Hide Post
Your guy needs to review-bomb that clown anywhere it'll make a difference. That guy needs to not be working on people's property.


______________________________________________
"If the truth shall kill them, let them die.”

"A man who does not read has no appreciable advantage over a man who cannot read."
 
Posts: 19376 | Location: Sonoran Desert | Registered: February 10, 2011Reply With QuoteReport This Post
Spread the Disease
Picture of flesheatingvirus
posted Hide Post
Wow. I would be super pissed, not only at bubba but at myself, too. It’s in good hands now.


________________________________________

-- Fear is the mind-killer. Fear is the little-death that brings total obliteration. I will face my fear. I will permit it to pass over me and through me. And when it has gone past me I will turn the inner eye to see its path. Where the fear has gone there will be nothing. Only I will remain. --
 
Posts: 18895 | Location: New Mexico | Registered: October 14, 2005Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Mason-Howe Rifle Room    From the WTF files... Bubba strikes again!

© SIGforum 2026