SIGforum
From the WTF files... Bubba strikes again!
November 21, 2026, 10:44 AM
benny6From the WTF files... Bubba strikes again!
I feel so bad for this guy. He's active duty military and had a "gunsmith" in Kentucky re-barrel his M1A with a Fulton barrel and install a Knight's Armament handguard and install the action into a custom ordered McMillan. He said he was getting over 8 MOA with the rifle.
So... the McMillan was never bedded.....
And.... the "gunsmith" tried to install a stock liner and hogged out a bunch of fiberglass for a stock liner, then abandoned the idea and just dropped the action into the stock with all the fiberglass missing...
The back of the bolt battered the McMillan
Excessive stock routing and dried epoxy where a stock liner was supposed to be...
Absolutely no material holding the action into the stock...
They even installed the rear sling swivel backwards...
I'm going to contact McMillan and see if they can expedite a repair on the stock so I can get it bedded before he PCS's
Tony.
Owner, TonyBen, LLC, Type-07 FFL
www.tonybenm14.com (Site under construction).
e-mail: tonyben@tonybenm14.com
November 21, 2026, 12:07 PM
Ronin101There are some really good M1A/M14 smiths out there. I dont know why you would pay top dollar for parts and get some random stranger the responsibility to put it all together ! trying to save money? no idea!
November 21, 2026, 01:17 PM
sigfreundPeople don’t know what they don’t know.
I used to have an entire rant about “professional” gunsmiths that was based on the fact that for years gun owners were told “Don’t do it yourself, let a professional do it right.” As I’ve said before, I thank the incompetents who convinced me that I could do it as well, and probably better, than many of the ones with a sign on the door—and I was right.
There are obvious exceptions, and some very good exceptions, and they’re the ones with waiting lists for months, or longer. But how does someone who is just starting out with a project in mind know who the butchers are? That’s probably easier to determine today than decades ago, but some of the ones that convinced me to learn how to do things myself had good reputations, and at least one was known nationally.
And even today gun parts are often accompanied with warnings that they should be installed only by professionals, and many people will assume that’s true. Regardless of what some of us may believe, not everyone knows or even should know everything we do.
I am, however, curious who some of the “really good” M1A/M14 smiths are (other than an obvious one whom we know and respect).
A few years ago I was reading that the number who could do good work on the rifles was declining rapidly. And then …. I contacted one about rebarreling my M1A. His response was about using a top level match barrel with (IIRC) tight chamber, and when I said I just wanted a decent new replacement for my badly pitted GI barrel to shoot military grade ammo, and not to win competitions, I never heard from him again.
(It’s just as well that I never pursued the project further because the gun shoots as well as I need it to.)
“Most men … can seldom accept the simplest and most obvious truth if it … would oblige them to admit the falsity of conclusions … which they have woven, thread by thread, into the fabrics of their lives.”
— Leo Tolstoy November 21, 2026, 01:52 PM
P220 SmudgeI would be unbelievably pissed. I hope McMillan can fix it.
______________________________________________
"If the truth shall kill them, let them die.”
"A man who does not read has no appreciable advantage over a man who cannot read."
November 21, 2026, 07:44 PM
fritzUgh. I have very good 'smiths do this type of work for me, so I'm no expert. But it looks like time for a new stock.
November 22, 2026, 02:47 AM
KMitch200Yeah…by the time Mac fixes that stock, it’s probably less expensive to buy another one.
--------
After the game, the King and the pawn go into the same box.
November 22, 2026, 05:45 AM
benny6The stock can be salvaged. I'll make sure of it. Worst case scenario, it gets painted after repair. He waited 6 months for the stock to be custom made when he ordered it 10 years ago.
Tony.
Owner, TonyBen, LLC, Type-07 FFL
www.tonybenm14.com (Site under construction).
e-mail: tonyben@tonybenm14.com
November 22, 2026, 07:05 AM
benny6I just checked headspace. It's 0.010" short. Probably 1.620".
The KY smith couldn't even headspace the barrel properly.
Tony.
Owner, TonyBen, LLC, Type-07 FFL
www.tonybenm14.com (Site under construction).
e-mail: tonyben@tonybenm14.com