quarter MOA visionary
| The PTR 91 is a great rifle and 98% the same a real HK. PICs or it didn't happen. Like this mine) |
| |
Membership has its privileges
| WOW, that is one beautiful rifle.
Niech Zyje P-220
Steve
|
| |
Member
| Those are cool. My Son is Jonesing for an SAR 8, kinda similar I think.
I keep telling him about ‘the man with one rifle’, he doesn’t seem to take it to heart. |
| |
Get my pies outta the oven!
| I have the poor cousin of the PTR, the Century Arms C308 and it's my understanding that a lot of it was actually built by PTR including the entire lower. Haven't had a chance to shoot it yet either, first upgrade is going to be an HK extended cocking handle. Bought 500 rounds of Wolf Russkie .308 before all the ammo shortages kicked in, I keep reading that these rifles happily gobble it up and spit out the casings with gusto!
|
| Posts: 33802 | Location: Pennsylvania | Registered: November 12, 2007 |
IP
|
|
Member
| How well will a PTR 91 shoot? How does it compare to a AR10? |
| |
E tan e epi tas
| quote: and spit out the casings with gusto!
HK91’s/G3’s etc. are as dangerous to the front right as they are right in front of the muzzle. . Those cases are like starboard area denial.
"Guns are tools. The only weapon ever created was man."
|
| Posts: 7681 | Location: On the water | Registered: July 25, 2002 |
IP
|
|
Gracie Allen is my personal savior!
| quote: I keep reading that these rifles happily gobble it up and spit out the casings with gusto!
If it's got the fluted chamber (which I'm almost certain it does), it may wind up doing a real number on brass anyway. I'm no expert, but I don't think I've heard of a PTR that wouldn't chow happily on steel cases. |
| Posts: 27293 | Location: Deep in the heart of the brush country, and closing on that #&*%!?! roadrunner. Really. | Registered: February 05, 2008 |
IP
|
|
Member
| The HK/clone .308 rifles eat just about anything you feed it, and yes they do a great job of shucking empties 20 yards down range of the firing line. RSO’s will get to know you quickly!
Evaluating volume of fire vs. shot placement effectiveness.
|
| |
quarter MOA visionary
| quote: Originally posted by jdshank: How well will a PTR 91 shoot? How does it compare to a AR10?
It depends on how you define "well"? My AR10's are much, much more accurate. Are they any more "fun"? I don't think so. HK's (and I am including the PTR's in this) are a classic icon and a great rifle. |
| |
Member
| quote: Originally posted by sourdough44: Those are cool. My Son is Jonesing for an SAR 8, kinda similar I think.
I keep telling him about ‘the man with one rifle’, he doesn’t seem to take it to heart.
I have a SAR 8, its a HK91 built in greece on HK tooling. You want to make sure its the pre-86 kind with the all steel construction, they made later ones with aluminum receivers and other nonsense. Honestly when I hold mine and hold a PTR-91 they both feel the same quality. PTR-91 much less pricey too. |
| Posts: 1471 | Location: Austin, TX | Registered: March 19, 2003 |
IP
|
|
Get my pies outta the oven!
| quote: Originally posted by kyoung: I am going to buy a 520rd spam can of Chinese 7.62x51 ball from a local i saw advertised on Armslist. Does anyone have any experience with it? Its steelcase copperwash ball. I am guessing it would be Tiawan manufacture. numbers are stamped on can are 65-92-61
Saw this online about that stuff, it doesn’t sound like it’s Taiwan-produced, it’s PRC-made ammo for export: Chinese may not issue 7.62X51 but they make it and still ship the stuff all over the world. The cartridge case is copper washed steel, bullet weight 147 grain. Velocities approximate M80 Ball at about 2650 fps. Earlier lots were corrosive, later lots dated after 1977 will be non-corrosive primed.
Honestly, I’d shoot Russian steel stuff like Wolf before Chicom ammo like this.
|
| Posts: 33802 | Location: Pennsylvania | Registered: November 12, 2007 |
IP
|
|
Fighting the good fight
| quote: Originally posted by kyoung: I am guessing it would be Tiawan manufacture.
At the risk of stating the obvious... If it's Chinese ammo, it's not from Taiwan. There was a decent amount of Norinco (Chinese) 7.62x51mm ammo that came in during the 1980s and early 1990s, before Chinese ammo imports were cut off. Much of it was sold in spam cans. Much of it was corrosive. If the markings are as you stated (65-92-61), then it's definitely Chinese. Made in 1992. |
| Posts: 32506 | Location: Northwest Arkansas | Registered: January 06, 2008 |
IP
|
|