I thought this might be another in a long line of calibers that shows initial promise and then dies a quick death from lack or available guns limited ammo supply, etc.
With the proliferation of concealed carry weapons this new cartridge might have a chance. Way more powerful than the .380 while allowing a little more capacity than a 9mm.
I have gone through a major thinning of the heard of guns and calibers along with it so I won't be an early adopter for sure but I will be keeping my eye on it to see how it develops.
It's probably too early for anyone to have tried it unless they were at S.H.O.T. show but I was just curious if anyone has actually tried it and if you did what did you think of it.
The numbers are similar to the .30 Luger. There is nothing new under the sun. Time may prove it to be a valid choice for concealed carry pistols, but a lot depends on guns chambered for it, cost of ammo and availability.
End of Earth: 2 Miles Upper Peninsula: 4 Miles
Posts: 16475 | Location: Marquette MI | Registered: July 08, 2014
Not going to add another round into my life after over the years limiting the number cartridges in my world. That said curios as to what manufacturers sell handguns in 30 super?
I like what I read & see on this round. I think it will live or die depending on what firearms it is chambered in.
Rom 13:4 If you do evil, be afraid. For he does not bear the sword in vain. For he is God's minister, an avenger to execute wrath on him who practices evil.
Posts: 723 | Location: Wyoming | Registered: September 30, 2012
I think it's an interesting round, but I'd rather see it employed to juice up the power of smaller autos (think mouse guns), rather than trying to boost the capacity of existing 9mms. Those guns are already available with acceptable capacity, IMO...I'd rather have 10-12 rounds of 9mm in a P365 than 15 rounds of hot-loaded .32.
But a harder-hitting, deeper-penetrating round in something tiny like an LCP or a Keltec P32-sized package has merit. It's like a shorter, rimless .32 magnum for semi-autos.
Commercially, though, they're probably pushing for the former market, as it'll likely drive more sales volume...if they can get ammo and guns on the shelf that are chambered in it. The way things are right now, I don't see it taking off...it's hard enough to find affordable 9mm as it is.
Posts: 9461 | Location: In the Cornfields | Registered: May 25, 2006
Originally posted by 92fstech: I think it's an interesting round, but I'd rather see it employed to juice up the power of smaller autos (think mouse guns), rather than trying to boost the capacity of existing 9mms...
But a harder-hitting, deeper-penetrating round in something tiny like an LCP or a Keltec P32-sized package has merit.
I might be interested in 30SC if they could get it to work in something like a Ruger LCP variant, but I don't think it's feasible. A 30SC cartridge is slightly longer than 9mm and has significantly higher chamber pressure. I believe both factors work against operating it in a mouse gun.
Posts: 3322 | Location: Texas | Registered: June 17, 2003
I might be interested in 30SC if they could get it to work in something like a Ruger LCP variant, but I don't think it's feasible. A 30SC cartridge is slightly longer than 9mm and has significantly higher chamber pressure. I believe both factors work against operating it in a mouse gun.
Good points...and also two more reasons why this cartridge won't likely be a success. I'd bet they'd have made some money off the initial hype at least if there had been guns and ammo available to buy when it was announced...but there weren't.
Posts: 9461 | Location: In the Cornfields | Registered: May 25, 2006
^^ You'd think that would be relatively easy if they decided to do it, and it would be nice to have a breachface and extractor that were designed and built for the specific cartridge. I don't necessarily need one of these with a double-column mag, but hey, a 320F chambered for the .30SC might be a lot of fun.
Posts: 27309 | Location: Deep in the heart of the brush country, and closing on that #&*%!?! roadrunner. Really. | Registered: February 05, 2008
Well Federal can at least use the factory floor space they set aside for their previous wannabe cartridge, .224 Valkyrie. OTOH, they would be rock stars if they just used those resources for simple calibers...like 30-30, 30-06, 270WIN, 300WIN, 12GA #2 steel, etc...you know, those calibers they've continued to consistently underserve for the past two years running.
-MG
Posts: 2268 | Location: The commie, rainy side of WA | Registered: April 19, 2020
