SIGforum.com Main Page SIG Pistols Primary Arms has released its first US made Red Dot! Aimpoint releases new Red Dot with a proprietary cut only available from Glock
Main Page SIG Pistols Primary Arms has released its first US made Red Dot! Aimpoint releases new Red Dot with a proprietary cut only available from GlockPage 1 2
Go | New | Find | Notify | Tools | Reply | |
| Raised Hands Surround Us Three Nails To Protect Us  |
I hope the PA does well and like the idea but the price is stout. While I like the idea. I have no interest in a Glock nor do I see any other optic makers adopting the ACUT. Some firearms manufacturers may adopt the cut if the optic takes off (which I doubt) and Aimpoints deal with Glock will allow it. Maybe some aftermarket folks will start ACUTs for other manufactures. I sure wish some sort of industry standard would come along. I currently only have an RMR as I am afraid to really get another dot because there are so many options. I had an old 320 with no factory cut milled for the RMR which I like just alright. A plate and an ACRO may be in its future but that’s creeping at $600. ———————————————— The world's not perfect, but it's not that bad. If we got each other, and that's all we have. I will be your brother, and I'll hold your hand. You should know I'll be there for you! | ||
|
Fighting the good fight |
Good for PA for taking the risk, but they're going to have quite the uphill battle establishing themselves as competitive with the known and proven duty-rated optics at their $700+ price point. | |||
|
| Peace through superior firepower  |
not a toomah | |||
|
| Member |
Exactly. I guess the plates ain't cheap. PA makes some good stuff and I have a couple of their Prism sights but at the price point, it's gonna be a tough sell. | |||
|
Spread the Disease |
So what are the differences between an Acro P2 and the COA? The only thing obvious is that it sits lower in the slide. I like the idea of the outer ring on the PA sight. ________________________________________ -- Fear is the mind-killer. Fear is the little-death that brings total obliteration. I will face my fear. I will permit it to pass over me and through me. And when it has gone past me I will turn the inner eye to see its path. Where the fear has gone there will be nothing. Only I will remain. -- | |||
|
Oriental Redneck |
The COA is smaller than the Acro but has a wider perceived window. Btw, does anyone know what the heck COA stands for? I read Aimpoint's big hoopla email release, and nowhere does it say what it is. Q | |||
|
For real? |
Wow, $700ish? I'm just going to see if work will get me an RMR-HD or RCR this year. Still waiting for the chief to retire so the next chief will make optics optional. I'm getting old, but still prefer irons. What does Primary Arms mean by RMR-A and RMR-B? Not minority enough! | |||
|
"Member" |
Yeah the portable Tv on top of my gun thing leaves me a bit cold. | |||
|
| Member |
My guess is the PA optic costs $700 is due to it being US made. Hard pass for me at that price! End of Earth: 2 Miles Upper Peninsula: 4 Miles | |||
|
| Raised Hands Surround Us Three Nails To Protect Us |
Size, mounting system, battery location, button location, adjustment location.
Maybe Compact Optic and A for the cut type.
Supposedly not just assembled in the US but all components made in the US as well. Where as the Sig Romeo X Enclosed is only assembled in the US. The blurb I read did not say whether that was street price or MSRP. The ACRO MSRP is $675 and easily had for $550 and I have seen them on sale for $500. RMR-HD MSRP is $1019 and they street around $700. So there is a chance street price will be lower. ———————————————— The world's not perfect, but it's not that bad. If we got each other, and that's all we have. I will be your brother, and I'll hold your hand. You should know I'll be there for you! | |||
|
Member |
I’m actually rather intrigued by this optic and may give one a try. The new Aimpoint optic looks pretty cool as well. I want to support American manufacturing, and I have enjoyed my buying experiences with Primary Arms, so I could definitely see this being my first pistol red dot. I’m not sure that it would work with my Staccato P, it maybe I’ll try one of these when I pick up a P320, or maybe something else altogether. I’m definitely intrigued by both optics and actually pretty excited about the Primary Arms. “It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat.” | |||
|
Nullus Anxietas |
Not for me. Not if it performs. As I noted in "Would you buy a Chinese riflescope?": I'm more than willing to pay more, much more, for American-made product if its comparable in in features and performance. If PA comes out with something like the Holosun 510C for my AR I'll definitely consider it. I'd love to replace the Chinese-made optic on my otherwise-all-American-made rifle with an American-made optic. "America is at that awkward stage. It's too late to work within the system,,,, but too early to shoot the bastards." -- Claire Wolfe "If we let things terrify us, life will not be worth living." -- Seneca the Younger, Roman Stoic philosopher | |||
|
Bolt Thrower |
The PA dot mounts really low, but the adapter plates don’t look that robust. It will be interesting to see how they hold up. | |||
|
Member |
Trijicon's stuff lists for around there MSRP as well. I'm really excited to see PA come out with this. I hope other mfgs take up the call to build US-sourced and US-made stuff. It's a good thing. If nothing else it's a chance for people who have always asked for US-made red dots to put their money where their mouth is. --------------------------- My hovercraft is full of eels. | |||
|
| Gracie Allen is my personal savior! |
For that kind of money, can we have a chevron instead of a 4MOA dot? ETA: Per PA CS, no - "it eats too much battery power".This message has been edited. Last edited by: Il Cattivo, | |||
|
| "Member" |
I GooGoo'd what COA stands for the other day, and got three different answers.  | |||
|
| Oriental Redneck |
Probably comes with the Certificate Of Authenticity. Q | |||
|
| For real? |
Compact Optimized Aimpoint? It's been almost 3 years with my RMR at work with no issues. Even with rain and snow. I'm not going to bother trying to get an enclosed optic anymore for it. I'm probably going to bite the bullet and get the RMR-HD. Not minority enough! | |||
|
| Thank you Very little  |
 | |||
|
| Oriental Redneck |
^^^ That's Vortex RDS, on a ridiculous Vortex mount. Not sure what it has anything to do with the topics of this thread? Q | |||
|
| Powered by Social Strata | Page 1 2 |
 | Please Wait. Your request is being processed... |
|
SIGforum.com Main Page SIG Pistols Primary Arms has released its first US made Red Dot! Aimpoint releases new Red Dot with a proprietary cut only available from Glock
Main Page SIG Pistols Primary Arms has released its first US made Red Dot! Aimpoint releases new Red Dot with a proprietary cut only available from Glock© SIGforum 2024