SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    CZ owners check IN
Page 1 2 3 4 
Go
New
Find
Notify
Tools
Reply
  
CZ owners check IN Login/Join 
Member
posted
Any CZ fans here? Recently picked up a P07 suppressor ready and 75D compact/PCR.

How do you lube the slide? Just oil or grease with oil floater?
 
Posts: 1871 | Registered: June 15, 2003Reply With QuoteReport This Post
Member
Picture of hjs157
posted Hide Post
My steel-on-steel CZ 75's receive oil only. As for the polymer P07, I suspect a Glock-like lubrication protocol would be in order.
 
Posts: 3595 | Location: Western PA | Registered: July 20, 2010Reply With QuoteReport This Post
Member
posted Hide Post
I'm a big fan. P-07's are one of the most slept on guns of the modern era. My current go-to's are the P-10C's.


IDPA ESP SS
 
Posts: 1013 | Location: Nashville, TN | Registered: January 03, 2007Reply With QuoteReport This Post
Member
posted Hide Post
One of the most slept on guns? lol What does that mean? Underrated, underfoot, under pillow?
 
Posts: 7540 | Location: Florida | Registered: June 18, 2005Reply With QuoteReport This Post
Member
posted Hide Post
I use TW25 on my 75BD and my PCR. I don't see any unusual wear and no malfunctions of any sort.
 
Posts: 1019 | Location: Central Ohio | Registered: January 05, 2018Reply With QuoteReport This Post
Diablo Blanco
Picture of dking271
posted Hide Post
I have a 75D PCR with Cajun Gun Works Pro kit installed, Dawson night sites, and checkered LOK grips. The DA/SA trigger is exceptional. I lube the frame rails with slide glide lite and put a little oil in a few other places. It’s my first CZ 75 series gun and I am finding the ergonomics to be superb for my hands.


_________________________
"An appeaser is one who feeds a crocodile - hoping it will eat him last” - Winston Churchil
 
Posts: 3046 | Location: Middle-TN | Registered: November 05, 2003Reply With QuoteReport This Post
Member
Picture of Delta-3
posted Hide Post
SP-01 Shadow built at the CZ Custom shop. Simply amazing to shoot!


Rom 13:4 If you do evil, be afraid. For he does not bear the sword in vain. For he is God's minister, an avenger to execute wrath on him who practices evil.
 
Posts: 724 | Location: Wyoming | Registered: September 30, 2012Reply With QuoteReport This Post
Member
posted Hide Post
I tend to randomly alternate grease and oil on my PCR/P01/BD guns.
But you gotta do full Cajun Gun Works with all the bells and whistles you can get. Moves a great gun into the semi-custom range (IMHO).
Congratulations on the new addiction.
 
Posts: 842 | Location: Baltimore, MD | Registered: March 29, 2009Reply With QuoteReport This Post
Member
posted Hide Post
I have a pcr.its a fantastic gun. Usually just use what ever gun oil I have on hand. Grease is nice since it doesn't tend to run and lasts longer.
 
Posts: 2773 | Registered: March 28, 2008Reply With QuoteReport This Post
Member
posted Hide Post
I have a 75B SA, 97B, SP-01. I use grease in the frame rails, oil on the rotating stuff. Enjoy! Awesome firearmsSmile
 
Posts: 491 | Location: Michigan | Registered: November 22, 2007Reply With QuoteReport This Post
Member
posted Hide Post
I’ve got an early 85 (pre-B) and it’s a good all steel gun. I usually use a little Mobil 1 synthetic grease on the frame rails.

I use the same on most guns.
 
Posts: 293 | Registered: September 12, 2021Reply With QuoteReport This Post
Member
posted Hide Post
Happy owner of a 75B, 75 TS and a 97B. All of them get a drop of Corrosion X on the rails and pivot/bearing points.
 
Posts: 94 | Location: SW VA | Registered: January 25, 2010Reply With QuoteReport This Post
Member
Picture of SigSentry
posted Hide Post
'08 75 compact. I lube with multi-purpose lithium grease from harbor freight. I just fill an old shooter's choice syringe.
 
Posts: 3639 | Registered: May 30, 2011Reply With QuoteReport This Post
Member
Picture of ridewv
posted Hide Post
I have one CZ handgun a basic, polished blued CZ75B, and four 452 .22 rifles, so yes I'm a fan.


No car is as much fun to drive, as any motorcycle is to ride.
 
Posts: 7350 | Location: Northern WV | Registered: January 17, 2005Reply With QuoteReport This Post
Thank you
Very little
Picture of HRK
posted Hide Post
Have a tactical P09, it's a big firearm, fun to shoot, thought about doing a Cajun upgrade.

Also have a Shadow 2, the fit finish and function of the Shadow is amazing.

Would like an Accushadow 2....
 
Posts: 24554 | Location: Gunshine State | Registered: November 07, 2008Reply With QuoteReport This Post
Member
posted Hide Post
Light Slip2000 grease on the rails of my P-07.


End of Earth: 2 Miles
Upper Peninsula: 4 Miles
 
Posts: 16480 | Location: Marquette MI | Registered: July 08, 2014Reply With QuoteReport This Post
Member
posted Hide Post
I have several of their all-steel pistols, but my older CZ Custom 75 T-SA remains my favorite. Typically use grease on rails, Mobil 1 oil on the rest of the usual lubrication points.


-MG
 
Posts: 2268 | Location: The commie, rainy side of WA | Registered: April 19, 2020Reply With QuoteReport This Post
Member
posted Hide Post
The wife and I both have CZ P01 with the CGW Pro kit installed. Both CZ are great. I use TW 25 on the slides and Hoppies oil on the rest.
 
Posts: 40 | Location: Southwestern Ohio | Registered: September 15, 2021Reply With QuoteReport This Post
Member
posted Hide Post
CZ P10S here but I've had other models as well.
Oil does the job.


I'd rather be hated for who I am than loved for who I'm not.
 
Posts: 3652 | Location: The armpit of Ohio | Registered: August 18, 2013Reply With QuoteReport This Post
Like a party
in your pants
Picture of armored
posted Hide Post
My Scorpion and Shadow enjoy a splash of Slip 2000 EWL.
 
Posts: 4721 | Location: Chicago, IL, USA: | Registered: November 17, 2002Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2 3 4  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    CZ owners check IN

© SIGforum 2024