SIGforum.com    Main Page  Hop To Forum Categories  Ammunition    M1152 9mm
Go
New
Find
Notify
Tools
Reply
  
M1152 9mm Login/Join 
Member
posted
Has anyone tried the Winchester M1152 9mm flat nose made for the Army handgun system?

Range report?
 
Posts: 238 | Registered: March 11, 2017Reply With QuoteReport This Post
Freethinker
Picture of sigfreund
posted Hide Post
I have fired it in a full size P320. It feels hotter than the typical 115 grain stuff commonly used for training, but not excessively so.




6.4/93.6

“Wise men talk because they have something to say; fools, because they have to say something.”
— Plato
 
Posts: 47365 | Location: 10,150 Feet Above Sea Level in Colorado | Registered: April 04, 2002Reply With QuoteReport This Post
Member
Picture of iron chef
posted Hide Post
I've shot some. It definitely has more punch behind it than standard 115gr. According to Winchester:

WWB 115gr - 1190fps muzzle velocity
Q4318 NATO 124gr - 1200fps
M1152 Active Duty 115gr - 1320fps

I don't know if it qualifies as +P, but the M1152 has more energy and felt recoil than 9mm NATO.

Last time I shot M1152 was through a P365 and Kahr P9, both subcompact/micro guns. The ammo was accurate and didn't give me any feed problems. Due to the increased energy, I'll probably reserve it for my compact & full-size guns.
 
Posts: 3172 | Location: Texas | Registered: June 17, 2003Reply With QuoteReport This Post
Member
posted Hide Post
Has anyone came up with load data to match this round?
 
Posts: 143 | Location: mich | Registered: June 24, 2020Reply With QuoteReport This Post
3° that never cooled
Picture of rock185
posted Hide Post
I have tried the M1152, and chronographed it in several different firearms. It really does meet the advertised velocity. Velocity in my guns is similar to the factory Federal 9BPLE 115 grain JHP +P+ load. The M1152 9mm energy, momentum and attendant recoil are just a bit more than the Winchester Q4318 9mm NATO I've chronographed...

For example, in semi-autos the M1152 averaged 1258 FPS in a 4" barrel, 1308 FPS in a 4.7", 1319 FPS one 5" gun, 1353 FPS in another. Out of curiosity, I also chronographed it in a 2" revolver, which averaged 1217 FPS. In a 3" revolver it averaged 1308 FPS.


Back in the day, long before such a thing as the M1152 existed, using Herco powder, I loaded 9mm to similar velocities with 115 and 124/125 grain bullets. I hesitate to post the exact powder weight because, while the load was published in older reloading manuals, it has been reduced in more recent editions. I used thousands of such loads in various 9mm pistols without any issues, but another's firearm might not digest it as well...


NRA Life
 
Posts: 1561 | Location: Under the Tonto Rim | Registered: August 18, 2003Reply With QuoteReport This Post
Freethinker
Picture of sigfreund
posted Hide Post
Thanks, rock185. Good information.




6.4/93.6

“Wise men talk because they have something to say; fools, because they have to say something.”
— Plato
 
Posts: 47365 | Location: 10,150 Feet Above Sea Level in Colorado | Registered: April 04, 2002Reply With QuoteReport This Post
To all of you who are serving or have served our country, Thank You
Picture of Jelly
posted Hide Post
As far as I can tell the M1152 9mm pressure is simular to the +P+ 9mm ammo.

From American Rifleman

There were reports of stoppages and double-feeds in XM17 testing, which were addressed by SIG. It was never an ammunition issue, as Winchester made no changes to M1152 or M1153. One of the differences between the military-issue M17 and the P320-M17 civilian version are the recoil springs. The U.S. M17 is designed to work with U.S.-issue ammunition only—the commercial guns have to run with everything.

The M1152 employs a 115-gr. full-metal-jacket, flat-nose (FMJ-FN) bullet. The M1153’s 147-gr. jacketed-hollow-point bullet bears a familial resemblance to the company’s law enforcement Ranger T-Series, but it was “designed to maximize performance based on the government specification set out in the RFP,” Glen Weeks, director of government contracts & specialty products for Winchester Ammunition, told me during an interview. The powder used is not a special propellant. Weeks said it is a “propellant we have experience with and use in other products.” The pressures for the M1152 and M1153 are 39,700 p.s.i.

In our tests in 1985, XM882 propelled a 124-gr. round-nose FMJ out of the 5" barrel of an M9 at an average of 1273 f.p.s., delivering 446 ft.-lbs. of energy at 15 ft. Using an Oehler Model 43 and firing the new ammunition out of a 4.7"-barreled P320-M17, M1152 with the 115-gr. bullet was at 1326 f.p.s. and 449 ft.-lbs. of energy, while the M1153 clocked 962 f.p.s. with 302 ft.-lbs., both at 15 ft.

Full article.

https://www.americanrifleman.o...ew-9-mm-luger-loads/
 
Posts: 2675 | Registered: March 15, 2004Reply With QuoteReport This Post
Member
posted Hide Post
I tried about 200 rounds of this through my m11 that just came back from sig.. I had some extraction and failure to feed issues. It’s believed that it’s a spring issue as the round was designed for the m17. The m11 ran 4318,hst 4172 etc without issue.

I was trying to find a replacement round for q4318, should they stop making it.
 
Posts: 532 | Registered: July 13, 2005Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by sigfreund:
I have fired it in a full size P320. It feels hotter than the typical 115 grain stuff commonly used for training, but not excessively so.


My experience as well, however shooting it out of a Glock 17. I’d say it’s on average (recoil wise) with the old Speer GDHP 115 grain +P round.

Very accurate too.
 
Posts: 874 | Location: NE Pennsylvania | Registered: December 10, 2009Reply With QuoteReport This Post
Member
Picture of ffhounddog
posted Hide Post
I am issued M1152 for my issued M17 and Glock 19. Ran it a lot through them. They work well. In fact since I have not seen the new M1153 just the older Federal 9MS is the ammo lockers its an interesting round.
 
Posts: 311 | Location: Huntsville, AL | Registered: January 19, 2011Reply With QuoteReport This Post
Peace through
superior firepower
Picture of parabellum
posted Hide Post
tnoutdoors did a review of the M1152 last year. It's too bad that he posts rarely these days.

 
Posts: 107258 | Registered: January 20, 2000Reply With QuoteReport This Post
Freethinker
Picture of sigfreund
posted Hide Post
Seeing this thread reminded me that I measured the velocity of the M1152 from a full size P320 with a LabRadar chronograph after my previous posts.

The average muzzle velocity for 10 shots was 1374 fps.




6.4/93.6

“Wise men talk because they have something to say; fools, because they have to say something.”
— Plato
 
Posts: 47365 | Location: 10,150 Feet Above Sea Level in Colorado | Registered: April 04, 2002Reply With QuoteReport This Post
3° that never cooled
Picture of rock185
posted Hide Post
In case anyone might be interested, I was out at the range the other night just as it got dark. Much as shown in TNoutdoor's video, the M1152 does not appear to utilize flash suppressed powder. The Winchester Q4318 9MM 124 NATO I was also shooting is obviously flash suppressed. From the shooter's perspective, I could not see any flash at all from the Q4318 NATO. I was using a pistol with an approx. 4.7" barrel.


NRA Life
 
Posts: 1561 | Location: Under the Tonto Rim | Registered: August 18, 2003Reply With QuoteReport This Post
Member
Picture of sgalczyn
posted Hide Post
for those in need:

https://www.bereli.com/winches...ive-duty-ammunition/

No shipping or sales tax................

~$0.30 cpr at the bulk end.............


"No matter where you go - there you are"
 
Posts: 4561 | Location: Eastern PA-Berks/Lehigh Valley | Registered: January 03, 2001Reply With QuoteReport This Post
Member
posted Hide Post
It performed very well in the MHS tests, extremely accurate and hot.

I’ve started my switch to the 1152 for stockpiling.

quote:
Originally posted by NavyAgShooter:
Has anyone tried the Winchester M1152 9mm flat nose made for the Army handgun system?

Range report?
 
Posts: 874 | Location: NE Pennsylvania | Registered: December 10, 2009Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  Ammunition    M1152 9mm

© SIGforum 2024