SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Educate me on reusable K cup coffee baskets
Go
New
Find
Notify
Tools
Reply
  
Educate me on reusable K cup coffee baskets Login/Join 
Wait, what?
Picture of gearhounds
posted
Sorry for the vague topic header Razz; I did a search on the forum but couldn’t find the answer I’m seeking.

I recently picked a Cuisinart k-cup style coffee maker for super cheap. I had a sample cup (pictured) from Sam’s club and the quality of coffee was far cleaner, quicker, and in terms of beverage quality, superior to my old drip down single cup maker.

Which reusable basket works with this design best? As the pics indicate, this is a double hole punch design and I need something compatible.





What works? I would be grinding my own super fine grounds (emulating what I see in K cups I’ve opened) to have the freshest, tastiest brew. What says the collective?




“Remember to get vaccinated or a vaccinated person might get sick from a virus they got vaccinated against because you’re not vaccinated.” - author unknown
 
Posts: 15932 | Location: Martinsburg WV | Registered: April 02, 2011Reply With QuoteReport This Post
Member
Picture of P250UA5
posted Hide Post
Seems it's a lot of trial & error on the reusable cups.

Some work well is a coarse grind, some with fine. Fill to capacity or partial. YMMV.

The one I have & rarely use has a fine 'mesh' all the way around & works well, but needs to be almost tightly packed. You do seem to get more loose grounds in your cup with the reusable cups than the k-cups. At least with the ones I've tried.




The Enemy's gate is down.
 
Posts: 16198 | Location: Spring, TX | Registered: July 11, 2011Reply With QuoteReport This Post
Get my pies
outta the oven!

Picture of PASig
posted Hide Post
I just buy basic "K-Cup Adapters" from Amazon. You can get a box of 10 or more of them for $12-15 now. They look like this:



I use a set for a year then toss them and start another.

I'm confused by your pictures here. One shows a hole in the center and one shows a hole at the top?

I've only used Keurig machines so I'm not sure how Cuisinart machines are set up.


 
Posts: 35033 | Location: Pennsylvania | Registered: November 12, 2007Reply With QuoteReport This Post
Member
Picture of P250UA5
posted Hide Post
quote:
Originally posted by PASig:
I'm confused by your pictures here. One shows a hole in the center and one shows a hole at the top?

I've only used Keurig machines so I'm not sure how Cuisinart machines are set up.


Keurig does the same.
Center punches the top of the k-cup & pokes a drain hole in the bottom.
I think most of the reusable cups are shallow enough to not hit the needle in the bottom.




The Enemy's gate is down.
 
Posts: 16198 | Location: Spring, TX | Registered: July 11, 2011Reply With QuoteReport This Post
Wait, what?
Picture of gearhounds
posted Hide Post
quote:
Keurig does the same.
Center punches the top of the k-cup & pokes a drain hole in the bottom.
I think most of the reusable cups are shallow enough to not hit the needle in the bottom.

This is exactly the information I was hoping to see. The bottom piercing post was my only big concern on what type of basket to consider. I e also heard that the tiny filter that fits inside the reusable basket is good to add to remove fine particulates and slow the drip to make a stronger brew.




“Remember to get vaccinated or a vaccinated person might get sick from a virus they got vaccinated against because you’re not vaccinated.” - author unknown
 
Posts: 15932 | Location: Martinsburg WV | Registered: April 02, 2011Reply With QuoteReport This Post
Thank you
Very little
Picture of HRK
posted Hide Post
quote:
Originally posted by PASig:
I just buy basic "K-Cup Adapters" from Amazon. You can get a box of 10 or more of them for $12-15 now. They look like this:

[IMG]https://www.nativeamericancoffee.com/cdn/shop/products/RC400-500-min_800x.jpg?v=1603819590 [ /IMG]

I use a set for a year then toss them and start another.

I'm confused by your pictures here. One shows a hole in the center and one shows a hole at the top?

I've only used Keurig machines so I'm not sure how Cuisinart machines are set up.


Ditto, we use the same one.
 
Posts: 24531 | Location: Gunshine State | Registered: November 07, 2008Reply With QuoteReport This Post
Member
Picture of bob ramberg
posted Hide Post
My son got me some stainless steel ones that work great. He was concerned about the plastic ones releasing chemicals at high temp.

They came in a two pack and have a removable metal lid with a gasket. You do need a dedicated holder for them as they touch the pin that punctures the bottom of the k-cup. I had a spare so I just cut off the pin in one.


Bob
Carpe Scrotum
 
Posts: 1398 | Location: Democratic Peoples Republic of Madiganistan | Registered: February 20, 2008Reply With QuoteReport This Post
אַרְיֵה
Picture of V-Tail
posted Hide Post
quote:
Originally posted by P250UA5:

Keurig does the same. Center punches the top of the k-cup
My Keurig brewer punches five holes in the top of the K-cup.



הרחפת שלי מלאה בצלופחים
 
Posts: 31608 | Location: Central Florida, Orlando area | Registered: January 03, 2010Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by V-Tail:
quote:
Originally posted by P250UA5:

Keurig does the same. Center punches the top of the k-cup
My Keurig brewer punches five holes in the top of the K-cup.


Mine as well. It’s the “multistream “ feature. Or something like that.


--
I always prefer reality when I can figure out what it is.

JALLEN 10/18/18
https://sigforum.com/eve/forum...610094844#7610094844
 
Posts: 2414 | Location: Roswell, GA | Registered: March 10, 2009Reply With QuoteReport This Post
Like a party
in your pants
Picture of armored
posted Hide Post
I have been using the basic K cup plastic containers for years, never a problem.
They are cheap, try them if they don't work give them away or throw them out.
 
Posts: 4719 | Location: Chicago, IL, USA: | Registered: November 17, 2002Reply With QuoteReport This Post
Hop head
Picture of lyman
posted Hide Post
quote:
Originally posted by PASig:
I just buy basic "K-Cup Adapters" from Amazon. You can get a box of 10 or more of them for $12-15 now. They look like this:



I use a set for a year then toss them and start another.

I'm confused by your pictures here. One shows a hole in the center and one shows a hole at the top?

I've only used Keurig machines so I'm not sure how Cuisinart machines are set up.


I had a few of these I used for Tea, just tossed the teabag in the k cup thingy and brewed a good cuppa, but you have to run a cup of water first to get the coffee out the machine from the previous cup , or you tea tastes like coffee,

wife started using them for some special blend coffee she liked when I stopped and bought a cheap kettle for my tea


no issues,

they can get funky as in stained etc but we would toss them after a year as well



https://chandlersfirearms.com/chesterfield-armament/
 
Posts: 10641 | Location: Beach VA,not VA Beach | Registered: July 17, 2007Reply With QuoteReport This Post
Gloom, despair and
agony on me.
Picture of drabfour
posted Hide Post
Needles don’t contact the reusable basket.


 
Posts: 5022 | Location: Texas | Registered: July 22, 2008Reply With QuoteReport This Post
Itchy was taken
Picture of scratchy
posted Hide Post
I'm still searching for a reusable I like. The fine mesh, either K cup, or drip, allow too much sediment.


_________________
This space left intentionally blank.
 
Posts: 4123 | Location: Colorado | Registered: August 24, 2008Reply With QuoteReport This Post
Wait, what?
Picture of gearhounds
posted Hide Post
Well, I tried a variety of cup similar to the purple ones above. What I discovered is that the brew is noticeably weaker and that there was none of the albeit light crema on the surface when the coffee stops brewing. I’m fairly certain the small hole in- small hole out lets water and steam pressure force better extraction from the grounds.

Is anyone familiar with a reusable basket with a configuration similar to how a standard k cup functions? That being a small hole in, small out? With the open bottom style (mine has very fine ss mesh) the brew just isn’t as tasty and because it lacks the paper style filter inside a k cup there is some residue as well. Basically the coffee is on par with my old drip style maker. It just doesn’t seem to compare to the result with a disposable k cup. Something like this looks about right but seems to sit lower and possibly touch the bottom puncture needle.



There are tiny paper filters that sit in reusable baskets to can catch pretty much all the grounds residue and I’m not opposed to the extra step to reduce the waste of disposable cups.




“Remember to get vaccinated or a vaccinated person might get sick from a virus they got vaccinated against because you’re not vaccinated.” - author unknown
 
Posts: 15932 | Location: Martinsburg WV | Registered: April 02, 2011Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by gearhounds:
Well, I tried a variety of cup similar to the purple ones above. What I discovered is that the brew is noticeably weaker and that there was none of the albeit light crema on the surface when the coffee stops brewing. I’m fairly certain the small hole in- small hole out lets water and steam pressure force better extraction from the grounds.

Is anyone familiar with a reusable basket with a configuration similar to how a standard k cup functions? That being a small hole in, small out? With the open bottom style (mine has very fine ss mesh) the brew just isn’t as tasty and because it lacks the paper style filter inside a k cup there is some residue as well. Basically the coffee is on par with my old drip style maker. It just doesn’t seem to compare to the result with a disposable k cup. Something like this looks about right but seems to sit lower and possibly touch the bottom puncture needle.



There are tiny paper filters that sit in reusable baskets to can catch pretty much all the grounds residue and I’m not opposed to the extra step to reduce the waste of disposable cups.


The style you have pictured works in the older Keurigs, where the coffee pod adapter (with the lower piercer) is removed. I'm not too sure about newer models. I have used one of those occasionally. I have 3 Keurigs, all of which I got for free, when relatives got newer models. Waste not- want not.
 
Posts: 539 | Location: Middle Alabama | Registered: February 27, 2010Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Educate me on reusable K cup coffee baskets

© SIGforum 2024