I put this new Mazak in a couple weeks ago. I’ve got adapters designed but have not yet made to get thru barrel coolant going. Looking forward to moving some barrel work to it from the Hardinge seen in the background. I’ve done many hundreds of barrels now on it but it can’t hold a candle to CNC for work that allows. I’ve got two other Mazaks, (vertical and horizontal mills), so going Mazak for this lathe made most sense. I’m tickled with it so far and wanted to share.
Posts: 1771 | Location: North Carolina | Registered: March 06, 2009
"Pacifism is a shifty doctrine under which a man accepts the benefits of the social group without being willing to pay - and claims a halo for his dishonesty." ~Robert A. Heinlein
Posts: 26758 | Location: dughouse | Registered: February 04, 2003
A view inside. I plan on doing spec barrels on it first. Prefits like RimX. I think I’m going to do a macro program later for the custom stuff. Like enter measurements from the receiver into variables to use in the program. Until then I’ll still do the custom work on the Hardinge.
Posts: 1771 | Location: North Carolina | Registered: March 06, 2009
I’m nowhere near the level to use CNC, but I’m super jealous of that Hardinge.
________________________________________
-- Fear is the mind-killer. Fear is the little-death that brings total obliteration. I will face my fear. I will permit it to pass over me and through me. And when it has gone past me I will turn the inner eye to see its path. Where the fear has gone there will be nothing. Only I will remain. --
Posts: 17777 | Location: New Mexico | Registered: October 14, 2005
_________________________________________________________________________ “A man’s treatment of a dog is no indication of the man’s nature, but his treatment of a cat is. It is the crucial test. None but the humane treat a cat well.” -- Mark Twain, 1902
Posts: 9398 | Location: Northern Virginia | Registered: November 04, 2005
Nice. Would love to see it in action. I get to Boone once in a while, maybe I can find your shop. My machines are all older than I am. South bend and Bridgeport. CNC is a bit deeper than I wish to go.
Posts: 2168 | Location: south central Pennsylvania | Registered: November 05, 2008
Originally posted by flesheatingvirus: I’m nowhere near the level to use CNC, but I’m super jealous of that Hardinge.
It’s served me well. For what it is it’s hard to beat an HLV-H. Threading on it is super easy for a manual. I’ve got this one fully set up for barrel work and is all I do on it.
Posts: 1771 | Location: North Carolina | Registered: March 06, 2009
Originally posted by Chris42: Nice. Would love to see it in action. I get to Boone once in a while, maybe I can find your shop. My machines are all older than I am. South bend and Bridgeport. CNC is a bit deeper than I wish to go.
I’m near Charlotte. You’re welcome to come by if you’re ever in the area.
Posts: 1771 | Location: North Carolina | Registered: March 06, 2009
It actually necks down to just over 1.250 where a collet closer attachment engages. That's no problem though. It works fine even on a 1.25 straight barrel. Unless larger magnums most all barrels are 1.25 or less shank size for what I do. I see people on other forums never recommend one for barrel work because they say they're too small. I just laugh and keep running this one. I do have fixturing set up on it front and rear. I had to make all that. I've got 4 jaw and 3 jaw setups for it too, and a 5C collet closer.
Posts: 1771 | Location: North Carolina | Registered: March 06, 2009
Originally posted by jelrod1: It actually necks down to just over 1.250 where a collet closer attachment engages. That's no problem though. It works fine even on a 1.25 straight barrel. Unless larger magnums most all barrels are 1.25 or less shank size for what I do. I see people on other forums never recommend one for barrel work because they say they're too small. I just laugh and keep running this one. I do have fixturing set up on it front and rear. I had to make all that. I've got 4 jaw and 3 jaw setups for it too, and a 5C collet closer.
Literally understood only 20% of this paragraph, but I am super envious of this cool tool!
___________________________________________ Life Member NRA & Washington Arms Collectors
Mistake not my current state of joshing gentle peevishness for the awesome and terrible majesty of the towering seas of ire that are themselves the milquetoast shallows fringing my vast oceans of wrath.
Velocitas Incursio Vis - Gandhi
Posts: 2121 | Location: T-town in the 253 | Registered: January 16, 2013