SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    POTS and AP-A
Go
New
Find
Notify
Tools
Reply
  
POTS and AP-A Login/Join 
Member
Picture of konata88
posted
Being forced off POTS and converted to VOIP. I'm getting an AP-A unit sent to me and the instructions indicate to not connect the AP-A phone outlet to the home phone jack.

However, the phone company website indicates that this is technically possible but requires a technician be sent to the house ($150 visit).

I don't want to use the AP-A phone jack to connect directly to my (cordless) phone set since the AP-A unit needs to be near wired LAN connection which is not convenient for the phone base.

It seems, via webz searches, that I can connect the AP-A phone outlet to a phone wall jack (connecting to the phone base elsewhere in the house like its current location) as long as I disconnect the external incoming phone line from the phone company to the house. This is very easy to do (it's an RJ(?) connector and not individual wires like before). I can do this outside the house or inside the closet (the home hub where phone, cable and cat5 are sent to various rooms in the house).

Need some expertise: To connect the AP-A to the home phone wiring and my cordless phone base (in its current location in another room), can I connect the AP-A outlet to the hub phone jack in the closet assuming I've disconnected from the external incoming phone company line (which should be disabled once I terminate landline service). Or is it more complicated than this? Would the phone company tech do anything more than this?




"Wrong does not cease to be wrong because the majority share in it." L.Tolstoy
"A government is just a body of people, usually, notably, ungoverned." Shepherd Book
 
Posts: 14901 | Location: In the gilded cage | Registered: December 09, 2007Reply With QuoteReport This Post
Member
posted Hide Post
The reason not to connect the VOIP>POTS (AP-A) adapter to a connected POTS line is that there is AC voltage on the POTS from the telco.
The AP-A will become your telco & provide the power to drive a normal phone.

If you isolate your POTS system from the telco, you can use multiple phone jacks around the house with the same AP-A. I've done this multiple times, however I don't know your hardware or line setup, so I'm being vague. If you do as you suggest, you should be fine.
 
Posts: 3447 | Location: IN | Registered: January 12, 2007Reply With QuoteReport This Post
Member
Picture of konata88
posted Hide Post
Thx. I was thinking that’s all it was and should be fine. But wasn’t completely sure. Expert insights appreciated.

I’ll disconnect the external incoming phone line.




"Wrong does not cease to be wrong because the majority share in it." L.Tolstoy
"A government is just a body of people, usually, notably, ungoverned." Shepherd Book
 
Posts: 14901 | Location: In the gilded cage | Registered: December 09, 2007Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    POTS and AP-A

© SIGforum 2026