SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    UPDATE: Solved! -- How To Remove A Deadbolt?
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
UPDATE: Solved! -- How To Remove A Deadbolt? Login/Join 
אַרְיֵה
Picture of V-Tail
posted
I am trying to change the deadbolt on our front door. When I first looked at it, I thought that it was held in place by two machine screws on the interior side of the door.

Then I went to remove the old lock and when I took a good look, these are not screw heads, they are smooth. No slot for a regular or Phillips screwdriver, just smooth heads.

Do you know how to remove this lock?






UPDATE: Aha! I put the key in and turned it 45° and the two little covers slid out of the way and exposed the screws inside the lock.

Who knew?

This message has been edited. Last edited by: V-Tail,



הרחפת שלי מלאה בצלופחים
 
Posts: 31699 | Location: Central Florida, Orlando area | Registered: January 03, 2010Reply With QuoteReport This Post
semi-reformed sailor
Picture of MikeinNC
posted Hide Post
Breaching round?

I’ve never seen a lock like that



"Violence, naked force, has settled more issues in history than has any other factor.” Robert A. Heinlein

“You may beat me, but you will never win.” sigmonkey-2020

“A single round of buckshot to the torso almost always results in an immediate change of behavior.” Chris Baker
 
Posts: 11568 | Location: Temple, Texas! | Registered: October 07, 2006Reply With QuoteReport This Post
Member
posted Hide Post
Maybe the outer ring unscrews.

If not just drill it taking care not to damage the door.
 
Posts: 1104 | Location: New Jersey | Registered: August 16, 2009Reply With QuoteReport This Post
Run Silent
Run Deep

Picture of Patriot
posted Hide Post
Are they metal caps that can be removed?


_____________________________
Pledge allegiance or pack your bag!
The problem with Socialism is that eventually you run out of other people's money. - Margaret Thatcher
Spread my work ethic, not my wealth
 
Posts: 7100 | Location: South East, Pa | Registered: July 04, 2002Reply With QuoteReport This Post
Raised Hands Surround Us
Three Nails To Protect Us
Picture of Black92LX
posted Hide Post
quote:
Originally posted by PeteF:
Is that a double dead bolt? And is this inside?
If inside maybe the outer ring unscrews.


I am guessing this as well. Unscrew the body.
If not take the plate off the portion of the door and see if you can remove the bolt then pop the bodies off.


————————————————
The world's not perfect, but it's not that bad.
If we got each other, and that's all we have.
I will be your brother, and I'll hold your hand.
You should know I'll be there for you!
 
Posts: 25829 | Registered: September 06, 2003Reply With QuoteReport This Post
Run Silent
Run Deep

Picture of Patriot
posted Hide Post
This site has a few options too.

http://phslock.com/articles/20...a-deadbolt-lock.html


_____________________________
Pledge allegiance or pack your bag!
The problem with Socialism is that eventually you run out of other people's money. - Margaret Thatcher
Spread my work ethic, not my wealth
 
Posts: 7100 | Location: South East, Pa | Registered: July 04, 2002Reply With QuoteReport This Post
Member
Picture of IndianaMike
posted Hide Post
no expert here
But does that outer ring rotate off and reveal some screws?
 
Posts: 1652 | Location: NORTHEAST INDIANA | Registered: August 18, 2006Reply With QuoteReport This Post
Only the strong survive
Picture of 41
posted Hide Post
The screws have inserts that fit in the Phillips head so you can't screw them out without removing the insert.

Go to Lowes and look at the Schlage deadbolt package and the insert that comes with it.


41
 
Posts: 11896 | Location: Herndon, VA | Registered: June 11, 2009Reply With QuoteReport This Post
אַרְיֵה
Picture of V-Tail
posted Hide Post
quote:
Originally posted by 41:

The screws have inserts that fit in the Phillips head.
How do you remove the inserts?



הרחפת שלי מלאה בצלופחים
 
Posts: 31699 | Location: Central Florida, Orlando area | Registered: January 03, 2010Reply With QuoteReport This Post
Member
posted Hide Post
1. remove striker plate.
2. locate small access hole next to the bolt.
3. should have a small Allen or hex in the hole that is a set screw to prevent cylinder from rotating.
4. loosen but do not remove Allen.
5. unscrew cylinder with key inserted.
 
Posts: 237 | Location: Florida | Registered: July 07, 2016Reply With QuoteReport This Post
אַרְיֵה
Picture of V-Tail
posted Hide Post
quote:
Originally posted by PeteF:

Is that a double dead bolt? And is this inside?
Yes to both.



הרחפת שלי מלאה בצלופחים
 
Posts: 31699 | Location: Central Florida, Orlando area | Registered: January 03, 2010Reply With QuoteReport This Post
Thank you
Very little
Picture of HRK
posted Hide Post
 
Posts: 24660 | Location: Gunshine State | Registered: November 07, 2008Reply With QuoteReport This Post
Only the strong survive
Picture of 41
posted Hide Post
Here is the part that screws into Schlage screws:

https://www.dkhardware.com/arm...-product-698708.html

I would use a small punch to rotate the screw head.


41
 
Posts: 11896 | Location: Herndon, VA | Registered: June 11, 2009Reply With QuoteReport This Post
Member
posted Hide Post
My money is on caps that are covering the actual screws underneath. Pry off the caps with small pic or jewelers screw driver.
 
Posts: 2012 | Location: DFW Texas | Registered: March 13, 2012Reply With QuoteReport This Post
Laugh or Die
posted Hide Post
Your post is marked as solved but you didn't follow up with which solution actually worked. We need to know! Big Grin


________________________________________________
 
Posts: 10218 | Location: NC | Registered: May 17, 2003Reply With QuoteReport This Post
Member
posted Hide Post
I could have sent my wife over there . I haven't changed a doorknob or deadbolt in years . The woman just has a gift for it . She definitely has more patience than I do .
 
Posts: 4422 | Location: Down in Louisiana . | Registered: February 27, 2009Reply With QuoteReport This Post
אַרְיֵה
Picture of V-Tail
posted Hide Post
quote:
Originally posted by Jester814:

Your post is marked as solved but you didn't follow up with which solution actually worked. We need to know! Big Grin
Update is in the original post, at the beginning of the thread; I discovered that turning the key 45° causes the covers to retract and the screws are then accessible.



הרחפת שלי מלאה בצלופחים
 
Posts: 31699 | Location: Central Florida, Orlando area | Registered: January 03, 2010Reply With QuoteReport This Post
His Royal Hiney
Picture of Rey HRH
posted Hide Post
quote:
Originally posted by V-Tail:


UPDATE: Aha! I put the key in and turned it 45° and the two little covers slid out of the way and exposed the screws inside the lock.

Who knew?


That's sort of funny how you discovered it but very ingenious on the designer's part.



"It did not really matter what we expected from life, but rather what life expected from us. We needed to stop asking about the meaning of life, and instead to think of ourselves as those who were being questioned by life – daily and hourly. Our answer must consist not in talk and meditation, but in right action and in right conduct. Life ultimately means taking the responsibility to find the right answer to its problems and to fulfill the tasks which it constantly sets for each individual." Viktor Frankl, Man's Search for Meaning, 1946.
 
Posts: 20257 | Location: The Free State of Arizona - Ditat Deus | Registered: March 24, 2011Reply With QuoteReport This Post
אַרְיֵה
Picture of V-Tail
posted Hide Post
quote:
Originally posted by Rey HRH:
quote:
Originally posted by V-Tail:


UPDATE: Aha! I put the key in and turned it 45° and the two little covers slid out of the way and exposed the screws inside the lock.

Who knew?
That's sort of funny how you discovered it but very ingenious on the designer's part.
Couldn't think of anything, so I started playing with it and staring at it.

We (wife and I) are the original and only owners of this house, built in 1986. We have locked and unlocked that door probably 50,000 or more times in the thirteen thousand days that we have lived here, and neither of us had ever noticed the covers retracting every time that the key was turned.



הרחפת שלי מלאה בצלופחים
 
Posts: 31699 | Location: Central Florida, Orlando area | Registered: January 03, 2010Reply With QuoteReport This Post
Fighting the good fight
Picture of RogueJSK
posted Hide Post
Glad you got that figured out, because my next suggestion was going to be a shaped charge.
 
Posts: 33437 | Location: Northwest Arkansas | Registered: January 06, 2008Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    UPDATE: Solved! -- How To Remove A Deadbolt?

© SIGforum 2024