SIGforum.com    Main Page  Hop To Forum Categories  What's Your Deal!    had some screws in a tin can
Go
New
Find
Notify
Tools
Reply
  
had some screws in a tin can Login/Join 
Green grass and
high tides
Picture of old rugged cross
posted
For a project I had. This is something that goes back quite a while. Think I could find them now that I would like to tackle the job? Hell no Mad



"Practice like you want to play in the game"
 
Posts: 20624 | Registered: September 21, 2005Reply With QuoteReport This Post
Member
Picture of cparktd
posted Hide Post
You WILL find them… After the job is done and while looking for something for the current task.



Endeavor to persevere.
 
Posts: 4332 | Location: Middle Tennessee | Registered: February 07, 2013Reply With QuoteReport This Post
Technically Adaptive
posted Hide Post
That's easy, look right next to the tape measure and 10mm socket.
 
Posts: 1679 | Location: Willcox, AZ | Registered: September 24, 2006Reply With QuoteReport This Post
Three Generations
of Service
Picture of PHPaul
posted Hide Post
quote:
Originally posted by rizzle:
That's easy, look right next to the tape measure and 10mm socket.


And pencil. I could have an entire box of #2 pencils sitting on the work bench and lose every damn one of them in half an hour. On a slow day...




Be careful when following the masses. Sometimes the M is silent.
 
Posts: 16023 | Location: Downeast Maine | Registered: March 10, 2010Reply With QuoteReport This Post
Void Where Prohibited
Picture of WaterburyBob
posted Hide Post
The day after you buy the screws needed, you’ll find them.



"If Gun Control worked, Chicago would look like Mayberry, not Thunderdome" - Cam Edwards
 
Posts: 16885 | Location: Under the Boot of Tyranny in Connectistan | Registered: February 02, 2005Reply With QuoteReport This Post
Green grass and
high tides
Picture of old rugged cross
posted Hide Post
All true guys Razz



"Practice like you want to play in the game"
 
Posts: 20624 | Registered: September 21, 2005Reply With QuoteReport This Post
Member
Picture of rebut10
posted Hide Post
Back lefthand corner of the righthand drawer in the workbench.


______________________

Live free or die...
Don't tread on me...
Molon Labe...
Take your pick.
 
Posts: 1277 | Location: Not on Cape Cod. | Registered: December 24, 2010Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by cparktd:
You WILL find them… After the job is done and while looking for something for the current task.


^^^ THIS!

Then you'll say "What are these for... Oh damn, THATS where they were. Damnit!"


______________________________________________________________________
"When its time to shoot, shoot. Dont talk!"

“What the government is good at is collecting taxes, taking away your freedoms and killing people. It’s not good at much else.” —Author Tom Clancy
 
Posts: 8995 | Location: Attempting to keep the noise down around Midway Airport | Registered: February 14, 2008Reply With QuoteReport This Post
Dances With
Tornados
posted Hide Post
Your wife borrowed it.

They're in the kitchen junk drawer, AKA the wifes toolbox.
.
 
Posts: 12160 | Location: Near Hooker Oklahoma, closer to Slapout Oklahoma | Registered: October 26, 2009Reply With QuoteReport This Post
Prepared for the Worst, Providing the Best
Picture of 92fstech
posted Hide Post
quote:
right next to the tape measure


I have 2 tape measures so that I can have one inside where I'm working and one out in the garage where I'm cutting. It never fails that my dumbass ends up carrying one or the other to the opposite place and leaving it there, so I have zero tape measures in one place, and two in the other.
 
Posts: 10642 | Location: In the Cornfields | Registered: May 25, 2006Reply With QuoteReport This Post
Itchy was taken
Picture of scratchy
posted Hide Post
This is how I ended up with 4 coffee cans of screws.


_________________
This space left intentionally blank.
 
Posts: 4200 | Location: Colorado | Registered: August 24, 2008Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by 92fstech:
quote:
right next to the tape measure


I have 2 tape measures so that I can have one inside where I'm working and one out in the garage where I'm cutting. It never fails that my dumbass ends up carrying one or the other to the opposite place and leaving it there, so I have zero tape measures in one place, and two in the other.


The tape measure is what I lose track of mostly. I now have at least 4 tape measures lying around 5 including the one in the truck.
 
Posts: 492 | Location: Florida | Registered: November 16, 2002Reply With QuoteReport This Post
Member
posted Hide Post
On any project, it comes down to "I need to run to the hardware store for some screws" and then starting the project only to find I already had a full box of them stored away.
This keeps Lowes, HD and Ace Hardware thriving!


End of Earth: 2 Miles
Upper Peninsula: 4 Miles
 
Posts: 17021 | Location: Marquette MI | Registered: July 08, 2014Reply With QuoteReport This Post
Run Silent
Run Deep

Picture of Patriot
posted Hide Post
My shop is like a squirrels yard…

A few weeks ago, my pool pump blew a run capacitor. No worries, ordered a few off of my pool site. Figured I’d order a new pump motor as the model is getting older and parts harder to find. Need a few shaft seals too for when I replace the motor. Shit, need a few gaskets too.

Get all the parts in and go to store them…and what do I find. A box of gaskets, shaft seals, etc for when I last rebuilt the damn pump front end!

I can’t tell you how many times I have found boxes of crap that I ordered in the past when going to put away things I recently ordered.

It sucks getting old!


_____________________________
Pledge allegiance or pack your bag!
The problem with Socialism is that eventually you run out of other people's money. - Margaret Thatcher
Spread my work ethic, not my wealth
 
Posts: 7235 | Location: South East, Pa | Registered: July 04, 2002Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  What's Your Deal!    had some screws in a tin can

© SIGforum 2025