SIGforum.com    Main Page  Hop To Forum Categories  Reloading    Loading 100 gr. Plated bullets in 380?
Go
New
Find
Notify
Tools
Reply
  
Loading 100 gr. Plated bullets in 380? Login/Join 
Member
posted
I found several loads with various powders for 100 gr. Bullets on both Alliant and Hodgedon sites, however, all loads were for FMJ bullets, none were for plated. I'm looking in particular at the max load listed by Hodgedon of 3.1gr. HP-38/231. What concerns me is plated bullets are listed @ .356" while FMJ are .355".

So what do you load in 380 or what would you load for 100gr Berrys bullet? Thanks.
 
Posts: 393 | Location: Florida Gulf Coast | Registered: October 17, 2015Reply With QuoteReport This Post
Member
posted Hide Post
I have been loading 380 auto for a long time now. I used to load 95gr FMJ and lead bullets, but a number of years ago, I switched over to plated 100gr RN bullets. I have loaded both Berry's and Xtreme bullets, and pleased with both.

I use a fast powder for these small cases. I settled on Red Dot powder long ago....it just works for me and my guns.


For my blowback 380 handguns:

100gr PRN with 2.2gr Red Dot


For my locked breech 380 handguns:

100gr PRN with 2.6gr Red Dot (full factory load)
 
Posts: 6600 | Location: Az | Registered: May 27, 2005Reply With QuoteReport This Post
Avoiding
slam fires
Picture of 45 Cal
posted Hide Post
^
Nice to see another red dot lover,went threw many 8 pound jugs but mostly in the 45 apc.
Great powder.
 
Posts: 22407 | Location: Georgia | Registered: February 19, 2007Reply With QuoteReport This Post
Member
posted Hide Post
I use AAC#5 in .380 with 100 grain Xtreme plated. Very reliable and accurate in my G42.
 
Posts: 4022 | Registered: January 17, 2007Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  Reloading    Loading 100 gr. Plated bullets in 380?

© SIGforum 2024