SIGforum.com    Main Page  Hop To Forum Categories  The Lair    Auto assembly line, lots of different parts shown on video.
Go
New
Find
Notify
Tools
Reply
  
Auto assembly line, lots of different parts shown on video. Login/Join 
Technically Adaptive
posted
I know there are several assembly line videos out there, not sure how the narrative sounds on this one, I use closed captioning. Springs, engine blocks, crankshafts.
 
Posts: 1907 | Location: Willcox, AZ | Registered: September 24, 2006Reply With QuoteReport This Post
My other Sig
is a Steyr.
Picture of .38supersig
posted Hide Post
So...

Going by the pics they are putting together a Cutlass with two frames?

It will be hard to drive with the second frame steering from the back of the car.

At least the video is real footage.




 
Posts: 10377 | Location: Somewhere looking for ammo that nobody has at a place I haven't been to for a pistol I couldn't live without... | Registered: December 02, 2014Reply With QuoteReport This Post
Technically Adaptive
posted Hide Post
It's more than just a Cutlass, they talk about a plant in Texas that I did not know existed.
Not sure why it is titled that way.
Did not know that they test run the engines on a swinging stand before installation back in the old days.
Shows how they made front coil springs, also show a piston installer tool that I have never seen.
I was also amazed of the straight up angle the engine/transmission was on installation.
Just a bunch of little things on the assembly process.
no need for you to watch the video, prolly seen all that.
 
Posts: 1907 | Location: Willcox, AZ | Registered: September 24, 2006Reply With QuoteReport This Post
My other Sig
is a Steyr.
Picture of .38supersig
posted Hide Post
It was a good production and seems every time I watch these I'll see a bit more that I didn't notice before.

Seeing the old GMC on the road brought back more memories as well.

Thanks for sharing.




 
Posts: 10377 | Location: Somewhere looking for ammo that nobody has at a place I haven't been to for a pistol I couldn't live without... | Registered: December 02, 2014Reply With QuoteReport This Post
Unapologetic Old
School Curmudgeon
Picture of Lord Vaalic
posted Hide Post
quote:
Originally posted by rizzle:
It's more than just a Cutlass, they talk about a plant in Texas that I did not know existed.
Not sure why it is titled that way.
Did not know that they test run the engines on a swinging stand before installation back in the old days.
Shows how they made front coil springs, also show a piston installer tool that I have never seen.
I was also amazed of the straight up angle the engine/transmission was on installation.
Just a bunch of little things on the assembly process.
no need for you to watch the video, prolly seen all that.


Arlington is a big plant, still in production now.




Don't weep for the stupid, or you will be crying all day
 
Posts: 10826 | Location: TN | Registered: December 18, 2005Reply With QuoteReport This Post
Thank you
Very little
Picture of HRK
posted Hide Post
Henry Fords Model T assembly line was a heck of a start for the auto industy..

 
Posts: 27968 | Location: Gunshine State | Registered: November 07, 2008Reply With QuoteReport This Post
My other Sig
is a Steyr.
Picture of .38supersig
posted Hide Post
It is worth noting that the first automobile assembly line was invented by David Dunbar Buick.

Ford improved upon it by having the parts ready and moving alongside the car to be assembled.




 
Posts: 10377 | Location: Somewhere looking for ammo that nobody has at a place I haven't been to for a pistol I couldn't live without... | Registered: December 02, 2014Reply With QuoteReport This Post
Three Generations
of Service
Picture of PHPaul
posted Hide Post
Not that it matters particularly, but my last job before I went to boot camp was at the Oldsmobile plant in Lansing, Michigan.

I worked on the hood and fender line, punching trim holes and loading them on paint bucks.




Be careful when following the masses. Sometimes the M is silent.
 
Posts: 16540 | Location: Downeast Maine | Registered: March 10, 2010Reply With QuoteReport This Post
Member
posted Hide Post
I’ve driven past that factory many times. All the full size GM SUVs are made there, from Chevy Tahoes to Cadillac Escalades.


No one's life, liberty or property is safe while the legislature is in session.- Mark Twain
 
Posts: 3904 | Location: TX | Registered: October 08, 2005Reply With QuoteReport This Post
Member
posted Hide Post
Had a good friend whose father worked at the GM plant in Linden, NJ his entire life. I am almost certain his job was aiming headlights. Pretty cool to see all the old equipment they used and the sheer number of people involved on those lines. I love these old manufacturing and assembly vids. A lot of good nostalgia in them.

-Jeff
 
Posts: 181 | Location: NJ | Registered: September 06, 2015Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lair    Auto assembly line, lots of different parts shown on video.

© SIGforum 2026