Go | New | Find | Notify | Tools | Reply | |
| Member |
Good afternoon, Hopefully this is okay to ask this question here. I am rebuilding an 870 and want to upgrade the follower. I see that Vang Comp has one. Does anyone have a recommendation? Thanks in advance. | ||
|
| Member |
Wilson Combat. 7 bucks. End of Earth: 2 Miles Upper Peninsula: 4 Miles | |||
|
semi-reformed sailor |
Someone makes a white derilin (slick plasticJ one that I eyeballed a while back but forgot about. Is there a big difference between the bright aluminum ones and stainless? "Violence, naked force, has settled more issues in history than has any other factor.” Robert A. Heinlein “You may beat me, but you will never win.” sigmonkey-2020 “A single round of buckshot to the torso almost always results in an immediate change of behavior.” Chris Baker | |||
|
| Member |
I am a Rem 870 armorer and responsible for a large number of Rem 870P shotguns. The Wilson Combat plastic follower can be problematic. If you have a magazine extension, the plastic follower will abrade itself on the joint between the magazine and magazine extension and eventually cause a fail to feed. The Vang Comp follower works and will not cause problems like a plastic follower. The factory plastic follower is "better" than the Wilson follower. If you're rebuilding/refurbishing, replace the magazine spring - factory springs work fine. | |||
|
| Member |
Thank you for the feedback! | |||
|
| semi-reformed sailor |
So due to this thread I ordered a Phase 5 follower https://www.brownells.com/shot...wers-prod126757.aspx For my home defense gun...just because Went with the phase 5 due to the large hole in the middle of the follower. "Violence, naked force, has settled more issues in history than has any other factor.” Robert A. Heinlein “You may beat me, but you will never win.” sigmonkey-2020 “A single round of buckshot to the torso almost always results in an immediate change of behavior.” Chris Baker | |||
|
| Member |
Am I correct in assuming you witnessed this with the factory mag extension? I have not seen this issue with Wilson followers in Wilson extensions. | |||
|
Fighting the good fight |
I use Type 2 followers from S&J in my 870s. https://sjhardware.us/product-category/remington-870/ I had problems in the past with a plastic Choate follower getting abraded by the junction between a mag tube and an extension, but so far, no such issues with the S&J followers. S&J uses Delrin, which is a Teflon-impregnated robust plastic that is slipperier and tougher than the cheaper nylon used by companies like Wilson and Choate. | |||
|
| Member |
No. I've seen issues with the WC follower in factory, WC and VC mag extensions. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
© SIGforum 2024