Go | New | Find | Notify | Tools | Reply |
Member |
I just picked up a Mossberg 590A1 with the 8round capacity. Bayonet lug and all! I was unimpressed with the Blackhawk adjustable stock it had and put back the factory stock for now. I was planning to put Magpul furniture and add a rail bit to the fore end to hang off a Surefire X300. I have a Magpul sling that I was going to throw on to it as well. This puts the final touches to it except for two things: 1) Sights. It comes with the factory bead sight. I was considering putting either a rail and some kind of optic or adding ghost sights. I have ghost sights on my duty Remington and am comfortable with it, but I don't want to have to get a whole other barrel to get the front sight. Is there another option for this? 2) More ammo. It has a really cheap side saddle that needs to be replaced. Any thoughts or recommendations? I have also seen online pictures with single or double shells attached to other parts of the shotgun. Thoughts? I really don't want to hang useless crap to this shotgun, I just want to optimize it for function. Any and all opinions would be appreciated. Thanks in advance. | ||
|
Spread the Disease |
Pics! The Magpul stock was a HUGE improvement. I also got a GG&G front/side sling mount. For side saddles, check out Mesa Tactical. I’ve been debating getting one for mine, but it is already a heavy beast. Mine came with factory ghost ring sights. The front base is soldered on, so maybe a gunsmith? I didn’t realize that the 8+1 A1 came as a bead sight option at all. Get a good sling! Magpul would be my first choice. I don't like the one I have on there at the moment and have been meaning to replace it with a Magpul so I can use the mount integrated into the stock. ________________________________________ -- Fear is the mind-killer. Fear is the little-death that brings total obliteration. I will face my fear. I will permit it to pass over me and through me. And when it has gone past me I will turn the inner eye to see its path. Where the fear has gone there will be nothing. Only I will remain. -- | |||
|
No place to go and all day to get there |
Mossberg offers a ghost ring sight package similar to the sights on FEV post. The front sight can be silver soldered over the bead. I have the sight on my 500 but my shotgun came with a rifle front sight so I only added the rear. Just another day in paradise. | |||
|
No place to go and all day to get there |
You also need a side saddle, mine is Velcro on the receiver with Velcro cards. Quick SS reload from your plate carrier. Just another day in paradise. | |||
|
semi-reformed sailor |
I use velcro ammo cards, and a tritum sight like this one…. https://www.midwayusa.com/prod...005908468?pid=185189 I chose the hogue overmolded youth stock…in case Mrs Mike has to use it "Violence, naked force, has settled more issues in history than has any other factor.” Robert A. Heinlein “You may beat me, but you will never win.” sigmonkey-2020 “A single round of buckshot to the torso almost always results in an immediate change of behavior.” Chris Baker | |||
|
Doin' what I can with what I got |
I'd recommend the magpul fore-end too, they're comparable in price to the MOE AR-15 handguards (read: dirt cheap) and give you plenty of options. Plus I find them ergonomically superior to the factory pump. You've reminded me I need to trim my own 590A1 out. ---------------------------------------- Death smiles at us all. Be sure you smile back. | |||
|
Member |
Nice gun - I'll likely get one if they ever show up around here. I had an early 90's 590military that I'd kill to have back! Speedfeed stock, ghost rings, heat shield, bayo lug and all - kick myself for trading it off, although that was like 25 years ago...now I want it back. | |||
|
Member |
My 590 looks very similar and I love the Magpul stock. It really makes shouldering so much easier than the older Hogue I inherited it with. I dont have the A1 model but I did add the Magpul sling swivel that attached around the mag and barrel. I really like it. I did go with the Surefire light though. Normally I would have but the price was right at the time. I did upgrade to a Wolf mag spring and the tube follower is an NDZ. I have been considering an upgraded / larger safety slide though. Anyone with experience in those? | |||
|
Spread the Disease |
I installed a Vang Comp safety. I like it. It is larger than the factory switch. ________________________________________ -- Fear is the mind-killer. Fear is the little-death that brings total obliteration. I will face my fear. I will permit it to pass over me and through me. And when it has gone past me I will turn the inner eye to see its path. Where the fear has gone there will be nothing. Only I will remain. -- | |||
|
Leatherneck |
I definitely recommend the MagPul stock. It’s a great accessory. I have a GG&G side saddle on mine which is absolutely bullet proof, but I’m probably going to switch it to the Velcro cards someday. I was not aware of their existence when I put the GG&G on mine. “Everybody wants a Sig in the sheets but a Glock on the streets.” -bionic218 04-02-2014 | |||
|
Chilihead and Barbeque Aficionado |
The Mossberg ghost ring sights are excellent. Target acquisition is fast. Plus, the rear sight is adjustable for windage and elevation. _________________________ 2nd Amendment Defender The Second Amendment is not about hunting or sport shooting. | |||
|
semi-reformed sailor |
I forgot to mention I also added a Phase5 follower to my mossberg https://phase5wsi.com/low-drag...-follower-12gsf.html Mine is lime green "Violence, naked force, has settled more issues in history than has any other factor.” Robert A. Heinlein “You may beat me, but you will never win.” sigmonkey-2020 “A single round of buckshot to the torso almost always results in an immediate change of behavior.” Chris Baker | |||
|
Member |
My 590a1 also has the bayonet lug. Although I will never use it for it's intended purpose, I bought a USMC issue OKC3s bayonet. Just in case. lol | |||
|
Yeah, that M14 video guy... |
My 870 has the Magpul furniture as well. I have both the SGA and the SAGE Ordnance pistol grip with the Kynshot recoil buffer and Magpul CTR stock. I actually prefer the pistol grip configuration. I shot the hottest 3" slugs and sabot slugs I could find as well as the hottest 00 Buck and it felt like I was shooting target loads. My shoulder was completely fine. And I like the looks of the SAGE pistol grip/Kynshot over the Blackhawk model. Mesa Tactical also makes a pistol grip adapter too. I believe the pic rail is Mesa as well. Tony. Owner, TonyBen, LLC, Type-07 FFL www.tonybenm14.com (Site under construction). e-mail: tonyben@tonybenm14.com | |||
|
Member |
What are you guys using for a heatshield? I have one on a 500, but as you know, the 590A1 barrel is thicker gauge and incompatible w/ heatshields for other 500/590 models. One upgrade I recommend is the Universal Minishell Adapter by Defender Tactical. For $25, it gives you the same functionality of a 590S. Unlike Opsol's adapter, you can run a mix of 2 1/4, 2 3/4, & 3 inch shells w/o changing anything out. DT has some other interesting accessories too. https://defendertactical.com/collections/other-pump | |||
|
Spread the Disease |
I’m using a slightly modified Mossberg factory heat shield. It didn’t take much effort. ________________________________________ -- Fear is the mind-killer. Fear is the little-death that brings total obliteration. I will face my fear. I will permit it to pass over me and through me. And when it has gone past me I will turn the inner eye to see its path. Where the fear has gone there will be nothing. Only I will remain. -- | |||
|
Member |
As far as the heat shield goes...I had to remove it because the Surefire fore-end would not slide with it installed.This message has been edited. Last edited by: bordeth, | |||
|
No place to go and all day to get there |
Much to my chagrin, I cannot put a heat shield on my Mossberg 500, the front rifle sight is silver soldered on and cannot be easily removed. Just another day in paradise. | |||
|
Spread the Disease |
My A1 came with the factory front sight base soldered on. You can still get a heat shield on there. See my pics, above. You install the rear of the shield against the receiver first, then give the front end a nice tap with a mallet. Plus, it also appears they make one make one for the A1 now: https://www.brownells.com/shot...hield-prod86749.aspx ________________________________________ -- Fear is the mind-killer. Fear is the little-death that brings total obliteration. I will face my fear. I will permit it to pass over me and through me. And when it has gone past me I will turn the inner eye to see its path. Where the fear has gone there will be nothing. Only I will remain. -- | |||
|
No place to go and all day to get there |
Quote: My A1 came with the factory front sight base soldered on. You can still get a heat shield on there. See my pics, above. You install the rear of the shield against the receiver first, then give the front end a nice tap with a mallet. Plus, it also appears they make one make one for the A1 now:Quote FEV FEV, your gun appears to be a 590 where mine is a 500 Mossberg. The Brownells part number is for a 590 gun but I bet the shield will fit my gun. Brownells offering comes with no hardware (I have looked and cannot find the hardware package)and an 8 week delivery. in no hurry so I will keep shopping Thanks for the suggestion. Just another day in paradise. | |||
|
Powered by Social Strata | Page 1 2 |
Please Wait. Your request is being processed... |