SIGforum.com    Main Page  Hop To Forum Categories  The Mason-Howe Rifle Room    Yes, another Tikka: The T3x Compact Tactical Rifle in 6.5 Creedmoor, a review. Update 15Nov26.
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
Yes, another Tikka: The T3x Compact Tactical Rifle in 6.5 Creedmoor, a review. Update 15Nov26. Login/Join 
Freethinker
Picture of sigfreund
posted Hide Post
Thanks for the advice.
Coming from you definitely makes it worth following. Smile




“Most men … can seldom accept the simplest and most obvious truth if it … would oblige them to admit the falsity of conclusions … which they have woven, thread by thread, into the fabrics of their lives.”
— Leo Tolstoy
 
Posts: 50181 | Location: 10,160 Feet Above Sea Level in Commirado | Registered: April 04, 2002Reply With QuoteReport This Post
Freethinker
Picture of sigfreund
posted Hide Post
To bring this back up and might be of some interest, I received the receiver with shortened barrel yesterday.

The work seems to have been done carefully and professionally by Thunder Beast. I had a CB type brake installed when I sent it to them and asked that it be reattached after shortening and rethreading the barrel. It came back perfectly timed, just as expected, but I checked nevertheless. The work report had this entry: RO = .006" which I assume referred to runout and the deviation of the new threads from the boreline (please correct me if I’m wrong). That is obviously very small, and when I used an alignment rod with the suppressor attached, it appeared to be perfectly centered in the endcap hole.

There were no marks in the Cerakote type finish which wouldn’t have surprised me if there were based on how I assumed the work would be done.

Although thus far I’m happy with how things turned out, it does serve as a reminder to research and avoid impulses which would have eliminated the need and expense of the whole aftermarket process.

The only thing that was a little off was the delivery. I was contacted last week for payment, and after not hearing anything further for a few days I called back to ask if I’d get tracking information when it was shipped. That conversation had just a whiff of “Yes, of course you’ll get notification,” exasperation, but I might have imagined that. I did not, however, get shipping information for the next few days and just thought things were delayed at a company that’s probably swamped with suppressor orders. I therefore didn’t expect to receive it yesterday and went to the range rather than sticking around for what I expected to be an “adult signature required” delivery. When I got home though? Of course: sitting on the stoop with no signature having been gotten by FedEx.

Next up: Rezeroing and checking accuracy and precision with crossed fingers.




“Most men … can seldom accept the simplest and most obvious truth if it … would oblige them to admit the falsity of conclusions … which they have woven, thread by thread, into the fabrics of their lives.”
— Leo Tolstoy
 
Posts: 50181 | Location: 10,160 Feet Above Sea Level in Commirado | Registered: April 04, 2002Reply With QuoteReport This Post
Ice age heat wave,
cant complain.
Picture of MikeGLI
posted Hide Post
I'm assuming 24" down to 20"?




NRA Life Member
Steak: Rare. Coffee: Black. Bourbon: Neat.
 
Posts: 10170 | Location: Orlando, Florida | Registered: July 12, 2005Reply With QuoteReport This Post
Freethinker
Picture of sigfreund
posted Hide Post
quote:
Originally posted by MikeGLI:
I'm assuming 24" down to 20"?

Yes, although I gave some thought to going even shorter, but that’s something I can always do in the future for another $250 (work plus shipping both ways). Wink

I never actually measured the original barrel length, but the US specification is 24 inches and the European length is 610mm, or 24.02 inches. I requested the cut off part of the barrel be sent back to me, and was surprised that it’s only 3.3 inches long, not 4". Part of the reason is that the shortened barrel actually measures 20.2", but that still leaves 0.5 inch unaccounted for. Perhaps Tikka doesn’t measure its barrels the way I did, muzzle to bolt face, but it also occurred to me that perhaps TBAC had to make two cuts and didn’t send me the short extra part that they had to remove.




“Most men … can seldom accept the simplest and most obvious truth if it … would oblige them to admit the falsity of conclusions … which they have woven, thread by thread, into the fabrics of their lives.”
— Leo Tolstoy
 
Posts: 50181 | Location: 10,160 Feet Above Sea Level in Commirado | Registered: April 04, 2002Reply With QuoteReport This Post
Ice age heat wave,
cant complain.
Picture of MikeGLI
posted Hide Post
quote:
Originally posted by sigfreund:

Yes, although I gave some thought to going even shorter,


How short?




NRA Life Member
Steak: Rare. Coffee: Black. Bourbon: Neat.
 
Posts: 10170 | Location: Orlando, Florida | Registered: July 12, 2005Reply With QuoteReport This Post
Freethinker
Picture of sigfreund
posted Hide Post
18 inches, but hadn't ruled out 16+.

It's unlikely I would reduce more than it is now, but I did try to research the possible disadvantages of those lengths to counteract the advantage of a short barrel with a long suppressor. The disadvantages were not enough for me to reject the idea out of hand, so .... Smile




“Most men … can seldom accept the simplest and most obvious truth if it … would oblige them to admit the falsity of conclusions … which they have woven, thread by thread, into the fabrics of their lives.”
— Leo Tolstoy
 
Posts: 50181 | Location: 10,160 Feet Above Sea Level in Commirado | Registered: April 04, 2002Reply With QuoteReport This Post
Freethinker
Picture of sigfreund
posted Hide Post
I went to the range today with the shortened barrel to rezero and a little practice. I screwed up measuring the velocities of the Hornady 140 grain ELD Match load that I fired the most shots with, but eight shots of the 147 grain ELD M load averaged 2566 fps, which was 93 feet per second slower than when the same load and lot were fired with the original 24 inch barrel (2659 fps). That was almost exactly what an AI Gemini query had led me to expect about shortening the barrel, and of course eight shots is a very small sample that could be misleading.

The precision of two five-shot strings fired from a bench for groups at 100 yards was unsurprisingly not what I got the first time as posted above. They were, however, about what I’d gotten otherwise with the original 24 inch barrel. They measured center to center 0.777 and 0.796 inch, or still well under Tikka’s 1 MOA guarantee for these rifles.

This rifle is for me mostly “just to have” and another way of burning 6.5 Creedmoor ammunition, but with a more appropriate scope and without the Arca rail on the forend it would be perfectly satisfactory for hunting (as long as the 10-round magazine didn’t run afoul of hunting regulations). Am I still happy with this latest Tikka? Yes. Smile




“Most men … can seldom accept the simplest and most obvious truth if it … would oblige them to admit the falsity of conclusions … which they have woven, thread by thread, into the fabrics of their lives.”
— Leo Tolstoy
 
Posts: 50181 | Location: 10,160 Feet Above Sea Level in Commirado | Registered: April 04, 2002Reply With QuoteReport This Post
Ice age heat wave,
cant complain.
Picture of MikeGLI
posted Hide Post
Interesting. What does AI Gemini say the velocity would be at 16"? Asking for a friend... Big Grin




NRA Life Member
Steak: Rare. Coffee: Black. Bourbon: Neat.
 
Posts: 10170 | Location: Orlando, Florida | Registered: July 12, 2005Reply With QuoteReport This Post
Freethinker
Picture of sigfreund
posted Hide Post
According to Gemini, going from a baseline velocity of 2650 fps and shortening the barrel length from 24 inches to 16 inches would reduce it about 193 fps to 2457 fps. Those figures are based on generalities about how much velocity is lost at various increments. The figures are also affected by the specific load, and my query was about the 147 grain Hornady load.




“Most men … can seldom accept the simplest and most obvious truth if it … would oblige them to admit the falsity of conclusions … which they have woven, thread by thread, into the fabrics of their lives.”
— Leo Tolstoy
 
Posts: 50181 | Location: 10,160 Feet Above Sea Level in Commirado | Registered: April 04, 2002Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Mason-Howe Rifle Room    Yes, another Tikka: The T3x Compact Tactical Rifle in 6.5 Creedmoor, a review. Update 15Nov26.

© SIGforum 2026