SIGforum.com Main Page Mason's Rifle Room I have AR-180 magazine questions, can the Sigforum brain trust offer some advice?
Main Page Mason's Rifle Room I have AR-180 magazine questions, can the Sigforum brain trust offer some advice?Go | New | Find | Notify | Tools | Reply | |
Member |
I traded someone for a Sterling made AR-180, but it only came with a crappy Ram line mag that was made to for AR-15’s, AR-180’s and Mini-14’s. I have read that USGI mags can be massaged to fit and function, has anyone tried it? How about Thermold? I see that those are still available and around $15. I suspect that they are about the same quality as the Ram Line mag I have. I read where someone also claimed Gen3 PMAGS were easy to convert. The Gen3 logo is the exact spot where the mag slot needs to be cut. Any thoughts or experience would be greatly appreciated. Thank you ........................................... All I've had all day is like six gummy bears and some scotch... | ||
|
semi-reformed sailor |
My friend James bought a truckload of Thermold mags when they closed up busines after a family member died, prolly a decade ago. His email is blackcreekguns @ gmail.com. Remove the spaces around the @. He was selling them by the box during the Hillary run up to President, and the run up to bidet. He is listed on Gun Broker as Floodzone…. Email him and ask if he still has any thermolds for sale…he’s semi-retired now so it may be a few days before he can ship them, if he has them in stock. Hell, he might even have a few AR180 mags hidden about. Good luck "Violence, naked force, has settled more issues in history than has any other factor.” Robert A. Heinlein “You may beat me, but you will never win.” sigmonkey-2020 “A single round of buckshot to the torso almost always results in an immediate change of behavior.” Chris Baker | |||
|
| Member |
Yes a GI magazine can be modified to use in an AR180. A slot for the 180 magazine catch has to be cut in the GI magazine. Use an original 180 magazine to make a template to mark the GI magazine. Cut the slot with a Dremel or needle files. I did this with several 20 round GI magazines for an AR180 that I used to have. I never tried it with a 30 round magazine, but it should work also. | |||
|
| Member |
Thanks Mike ........................................... All I've had all day is like six gummy bears and some scotch... | |||
|
| Member |
If you do some searching, there's a fairly active AR-180 community out there. When I was looking at getting one, I found the blueprints for magazine conversions relatively easily. What, me worry? | |||
|
| Member |
I had one years ago. Converted several AR15 mags to work in the AR180. Insert the mag, tap the release lightly and it will mark exactly where the slot should be cut. And, if I remember correctly, I would have to hammer down the mag catch protrusion on the AR15 mag slightly. | |||
|
Member |
Btw, never ever, ever drop the hammer with the action open on an AR-180. The hammer will break and there are no replacement parts. Be very careful when cleaning. La Dolce Vita | |||
|
| Member |
I have heard about issues breaking the bolt hold open if the hammer falls on it with the gun open. Didn’t know about hammer damage. Thanks for the info. ........................................... All I've had all day is like six gummy bears and some scotch... | |||
|
Hop head  |
if you have a factory mag, or one that is cut correctly, it is pretty easy to set up a vice in a drill press or a table top mill and cut them, https://chandlersfirearms.com/chesterfield-armament/ | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
SIGforum.com Main Page Mason's Rifle Room I have AR-180 magazine questions, can the Sigforum brain trust offer some advice?
Main Page Mason's Rifle Room I have AR-180 magazine questions, can the Sigforum brain trust offer some advice?© SIGforum 2024