I\nAm considering replacing my standard p365 10 shot grip module with one of the aftermarket options out there. If anyone has any experience with this and has walked down this path before please give me your input. As always thank you very much.

I have the Wilson Combat polymer ones. They are an improvement for about $55. I also have Tyrant polymer snub nose that fits 17 round macro mags in the same holster as the 10 and 12 round frames, it's decent but I'm back to carrying the XL size with a 12 round mag. This is a big rabbit hole, there are a bunch of metal ones that cost hundreds.

I like metal/aluminum grips on my pistols. I ordered one from ECM Precision. I have the R11 on my P365 XMacro Comp. Feels really good in my hand.

https://ecmprecision.com/

I'm a big fan of the Wilson Combat modules. I have one on my P365X as well as on my XMacro.

Better texture and shape than the factory modules.

Another fan of the WC P365 grip module here.

I hav 4 365s, each a slightly different flavor but all have the Wilson Grip Modules. I tried for years to like the stock P365, but just didn’t find it cmfortable to shoot. Sold it, 6 months later Tried again, but same end to the story.

Then I tried the Wilson and, for me, it made all the difference in the world.

Bob

Another fan also of the Wilson Combat. Have on one of our P365’s and my 365X.

My TacOps has a Wilson grip module on it.

What are you looking to accomplish?

I say get one of the micro SBR's

The only thing wrong with my standard-configuration one is that the grip is actually a little small for my hand. I pull the trigger with my finger between the first and second joints to keep from shooting left. I dislike grip sleeves. The Wilson Combat one looks a little more "hand-filling" and is reasonably priced. ($66)

quote:

Originally posted by egregore:
The only thing wrong with my standard-configuration one is that the grip is actually a little small for my hand.

This is exactly the reason I went with the Wilson grip module. It was money well spent.

Another big fan of the WC module, made a HUGE difference in the feel of the gun

What I am trying to accomplish is mainly recoil control. I know it is only a 9mm but this little suckered jumps around quite a bit when shot rapidly. I am leaning heavily towards getting the WC module.

In addition to the better texture on the WC grip modules, if you're willing to invest in some 12 round mags and give up just a half inch in extra grip length, I found that picking up a WC XL grip and switching over to the "P365X" configuration (365 slide on a 365XL grip as shown in black in my earlier post) allowed for better control compared to the shorter standard P365 10 round length grip.

Wilson for me too. Best bang for the $$$.

quote:

Originally posted by RogueJSK:
In addition to the better texture on the WC grip modules, if you're willing to invest in some 12 round mags and give up just a half inch in extra grip length, I found that picking up a WC XL grip and switching over to the "P365X" configuration (365 slide on a 365XL grip as shown in black in my earlier post) allowed for better control compared to the shorter standard P365 10 round length grip.

Armory Crafts Wilson Combat Pinkie extension for the 10 round magazines are significantly better than the Sig pinkie extension...another highly recommended upgrade when you switch to the WC grip module

I was planning on going with the Magpul 10 round mags which have both a flat and a pinky extension .I was wondering if anybody was using the pinky extension while using that magazine and if it was as good as the Armory craft.

I started like ibanda and still using the Tyrant module with the 17rd mag.
I'm thinking of going back to the WC module with 12rd mag or going back to stock to make mine a pocket gun again.

I don't carry the P365 much anymore.

I ordered a Wilson, also using a 10% discount code (that I got in an unsolicited email after visiting the site for the first time). According to the illustration it comes with a mag release, but not assembled, presumably so I can select handedness. With discount, tax and UPS Ground, $74.85 OTD. This is the upper limit of what I want to spend.

If it comes with the magazine release unassembled my opinion is they did it to save a couple bucks. My second question for everyone is should I buy the 12 round module as I will be pocket carrying in large cargo pockets on my pants which I wear all the time since I live in Florida and it's as hot as the plains of Africa most of the time. Also to put this entire Endeavor into perspective I own the large size X macro p365 and I'm going to use the innards to build a small pocket carry model. I really appreciate everyone taking the time to answer these questions thank you very much.