P365 Milled for a Shield Sight RMSc

Member

posted May 10, 2018 03:07 PM

We just finished milling this P365 to accept a Shield Sights RMSc, came out really nicely.

Posts: 134 | Registered: August 24, 2017

Nick

Where liberty dwells,
there is my country
Picture of Nick

posted May 10, 2018 03:09 PM

I like it! Is it for you or a customer?

"Escaped the liberal Borg and living free"

Posts: 2227 | Location: North Carolina, USA | Registered: January 21, 2003

Ignored post by Nick posted May 10, 2018 03:09 PM

Member

posted May 10, 2018 03:11 PM

quote:
Originally posted by Nick:
I like it! Is it for you or a customer?

It's a customers.

Posts: 134 | Registered: August 24, 2017

Ignored post by GallowayPrecision posted May 10, 2018 03:11 PM

rockchalk06

Member

posted May 10, 2018 03:42 PM

That's slick!

Posts: 1363 | Location: OK | Registered: April 13, 2016

Ignored post by rockchalk06 posted May 10, 2018 03:42 PM

cremaley

Member

posted May 10, 2018 05:31 PM

Very nice!

Sig P320 X-Compact 9mm
Bul SAS 11 UL 9mm
US Army Veteran
NRA Member

"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Posts: 152 | Location: Alpharetta, Georgia. | Registered: June 10, 2010

Ignored post by cremaley posted May 10, 2018 05:31 PM

Phred

The Blue Machine
Picture of Phred

posted May 10, 2018 07:00 PM

That looks great. Is it a true co-witness with the factory sights?

Posts: 1646 | Location: South Carolina | Registered: February 27, 2003

Ignored post by Phred posted May 10, 2018 07:00 PM

Mike S

The Once and Future SIG Shooter
Picture of Mike S

posted May 11, 2018 12:14 AM

That’s really cool looking!

Posts: 4524 | Location: Mississippi | Registered: December 08, 1999

Ignored post by Mike S posted May 11, 2018 12:14 AM

soggy_spinout

addicted to trailing-throttle oversteer

posted May 11, 2018 09:03 AM

Looks pretty good. Is your customer planning on removing the irons and/or adding a raised set to cowitness with? In that one rear side pic the low green front sight is rather distracting.

Posts: 8983 | Location: Drippin' wet | Registered: April 18, 2010

Ignored post by soggy_spinout posted May 11, 2018 09:03 AM

shakazulu12

Member

posted May 11, 2018 10:38 AM

Any shooting reports? While I think it's now being shown that the P365 can run well after some initial issues, I'm a little curious on how potential changes to the slide mass may affect things.

Posts: 20 | Location: Portland, OR | Registered: April 24, 2008

Ignored post by shakazulu12 posted May 11, 2018 10:38 AM

Member

posted May 11, 2018 10:40 AM

quote:
Originally posted by Phred:
That looks great. Is it a true co-witness with the factory sights?

Sure is. We can go deep enough for it.

Posts: 134 | Registered: August 24, 2017

Ignored post by GallowayPrecision posted May 11, 2018 10:40 AM

Member

posted May 11, 2018 10:42 AM

quote:
Originally posted by soggy_spinout:
Looks pretty good. Is your customer planning on removing the irons and/or adding a raised set to cowitness with? In that one rear side pic the low green front sight is rather distracting.

He's leaving the stock irons. That's why we milled so deep so it can co witness with the stock irons.

Posts: 134 | Registered: August 24, 2017

Ignored post by GallowayPrecision posted May 11, 2018 10:42 AM

Member

posted May 11, 2018 10:43 AM

quote:
Originally posted by shakazulu12:
Any shooting reports? While I think it's now being shown that the P365 can run well after some initial issues, I'm a little curious on how potential changes to the slide mass may affect things.

Don't have a full pistol, just the slide was sent in. We're waiting on our distributors to get some P365 pistols in stock. We don't want to pay gunbroker prices for a test gun.

Posts: 134 | Registered: August 24, 2017

Ignored post by GallowayPrecision posted May 11, 2018 10:43 AM