SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    I have a P210-6 coming. Extra mags source? Extended safety ?
Go
New
Find
Notify
Tools
Reply
  
I have a P210-6 coming. Extra mags source? Extended safety ? Login/Join 
Member
posted
I have a 1978 Sig P210 coming. I need at least 1.more mag. I read some discussions from a couple of years ago where someone was making an extended safety lever. Never saw the price and have not found any recent post about it.
Any help appreciated
 
Posts: 562 | Location: Dothan, Alabama | Registered: August 27, 2000Reply With QuoteReport This Post
Member
Picture of MG34_Dan
posted Hide Post
You have a +$2500 pistol, so treat it correctly. Use only Swiss made P-210 magazines. They are on GB all the tire. Expect to pay ~$150 each. Don't install any brand X crap on it.


“Elections have consequences, and at the end of the day, I won.”
– Barack Hussein Obama, January 23, 2009
 
Posts: 2198 | Location: Austin Texas USA | Registered: February 03, 2007Reply With QuoteReport This Post
Member
posted Hide Post
Been looking on gb. But the only originals i see are in Poland.
 
Posts: 562 | Location: Dothan, Alabama | Registered: August 27, 2000Reply With QuoteReport This Post
That's just the
Flomax talking
Picture of GaryBF
posted Hide Post
You can use P210 Legend magazines with a slight modification of the baseplate or replacing the baseplate with one from a p225. Legend magazines are about half the price and new.

https://sigforum.com/eve/forums...120011064#9120011064

https://sigforum.com/eve/forums...980050744#1980050744


Regarding the safety lever, I suggest you leave it as is. Modifying this classic will only diminish its future value.
 
Posts: 11875 | Location: St. Louis, Missouri | Registered: February 04, 2008Reply With QuoteReport This Post
Member
posted Hide Post
The safety lever i am talking about was sold complete and did not require any modification to the gun or the existing part. The old safety could be reinstalled at any time
 
Posts: 562 | Location: Dothan, Alabama | Registered: August 27, 2000Reply With QuoteReport This Post
3° that never cooled
Picture of rock185
posted Hide Post
I remember those safety extensions. They appeared to be very nicely made,fit over the existing factory safety lever, and were secured with a set screw, IIRC. I considered one, but didn't want to mark up the factory safety with the set screw. Seems like they were about $150.00, but don't quote me there.
GaryBF is correct. The Legend magazine with modified base plate, or flat/Swiss type base plate, works just fine in the Swiss guns.


NRA Life
 
Posts: 1586 | Location: Under the Tonto Rim | Registered: August 18, 2003Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    I have a P210-6 coming. Extra mags source? Extended safety ?

© SIGforum 2024