SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    Is the new Glock barrel any more accurate?
Go
New
Find
Notify
Tools
Reply
  
Is the new Glock barrel any more accurate? Login/Join 
Unapologetic Old
School Curmudgeon
Picture of Lord Vaalic
posted
Hows the new "marksman" barrel on the gen 5? Seem any better or worse to anyone? Harder to clean? What are the thoughts so far




Don't weep for the stupid, or you will be crying all day
 
Posts: 10782 | Location: TN | Registered: December 18, 2005Reply With QuoteReport This Post
Sigforum K9 handler
Picture of jljones
posted Hide Post
The new barrel is more accurate. The ones I have shot are a 2 inch gun at 25 instead of a 3-4 inch gun at 25. I have found no issues in cleaning them.




www.opspectraining.com

"It's a bold strategy, Cotton. Let's see if it works out for them"



 
Posts: 37304 | Location: Logical | Registered: September 12, 2004Reply With QuoteReport This Post
A teetotaling
beer aficionado
Picture of NavyGuy
posted Hide Post
Clean up is the same as the original poly barrel. I do like the crown recess.

I seem to be a bit more accurate with G19.5 than G19.4. That could be a result of the barrel, or a better fit for me. Probably a function of both. I've not shot further than 15 yards and have only shot standing unsupported. 3" groups at 15 yards is about the best I can do with inexpensive range ammo at 15 yards. G19.4 might clock in a little bigger spread but that's anecdotal as I've not done controlled test comparisons. For me the Gen 5 is a pretty good fit.



Men fight for liberty and win it with hard knocks. Their children, brought up easy, let it slip away again, poor fools. And their grandchildren are once more slaves.

-D.H. Lawrence
 
Posts: 11524 | Location: Fort Worth, Texas | Registered: February 07, 2007Reply With QuoteReport This Post
Member
posted Hide Post
Don't have one but reports from multiple strong shooters who I personally know and trust indicate higher accuracy out of Gen5. Uncertain if it is a barrel per se, better lockup, both, trigger, but the consensus amongst my group has been fairly unanimous.
 
Posts: 486 | Registered: April 03, 2014Reply With QuoteReport This Post
Member
Picture of bcjwriter
posted Hide Post
You can also shoot lead I hear as well.



 
Posts: 1977 | Location: Southern CA | Registered: July 27, 2008Reply With QuoteReport This Post
Member
posted Hide Post
I have a very small sample size to report on. My Gen5 G19 is more accurate than my Gen4 G19 but not any more accurate in my hands than my favorite Gen3 G19. Keep in mind that I traded in my previous Gen3 G19 for the one I currently have because it was ridiculously inaccurate. I might have just lucked out with my current one...it was made many moons ago (even before MIM extractors), so YMMV.
 
Posts: 872 | Registered: October 08, 2000Reply With QuoteReport This Post
Member
posted Hide Post
Noticeably more accurate with my G17 and G19 Gen 5's than with any other Gen 3 or 4 glock i have owned and i have pretty much owned all of them at one time or another except for the .45 GAP models.
One exception-the Glock 40 and 20 10mm Glocks have always been wickedly accurate at distances which i think is a function of the 10mm cartridge which i find to be very accurate out of just about any platform i have fired it from.
I cannot say whether its the barrel, trigger, or the fit in my hand that makes the Gen 5 more accurate but the barrel sure isn't hurting it in the accuracy department.
BTW, just when i said i am done buying guns, (have been on a tear the last 6 months, a dozen new guns) i just saw the post about the Gen 5 Glock 26. If thats true, I am NOT done buying guns.
 
Posts: 558 | Registered: August 09, 2014Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by jljones:
The new barrel is more accurate. The ones I have shot are a 2 inch gun at 25 instead of a 3-4 inch gun at 25. I have found no issues in cleaning them.
Not intending to derail this thread, but have you used the KKM and/or Bar-Sto barrels and what kind of accuracy did you get of of them? And are you taking about the G17 or G19 Gen 5s?
 
Posts: 875 | Location: South Dakota | Registered: May 21, 2013Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by bcjwriter:
You can also shoot lead I hear as well.

Glock inc will still say no lead, but in my 30 years of shooting glocks with cast lead bullets never had an issue with them. If you can look inside your bore and use a bore brush every 200 rounds or so, the lead is a non issue.

This message has been edited. Last edited by: captain127,
 
Posts: 3436 | Location: Finally free in AZ! | Registered: February 14, 2003Reply With QuoteReport This Post
SIG-Sauer
Anthropologist
posted Hide Post
quote:
Originally posted by jljones:
The new barrel is more accurate. The ones I have shot are a 2 inch gun at 25 instead of a 3-4 inch gun at 25. I have found no issues in cleaning them.


So we can expect the next world record in International Military Shooting Sports CISM to be shot with a Glock? Wink
 
Posts: 3790 | Location: Switzerland | Registered: January 24, 2001Reply With QuoteReport This Post
Sigforum K9 handler
Picture of jljones
posted Hide Post
quote:
Originally posted by Sparkyk:
quote:
Originally posted by jljones:
The new barrel is more accurate. The ones I have shot are a 2 inch gun at 25 instead of a 3-4 inch gun at 25. I have found no issues in cleaning them.
Not intending to derail this thread, but have you used the KKM and/or Bar-Sto barrels and what kind of accuracy did you get of of them? And are you taking about the G17 or G19 Gen 5s?


The new barrels seem to exhibit the same accuracy standards as the custom “drop in” fit barrels from KKM and others. They still aren’t the same grade as what you get from the gunsmith fit Barsto barrels though.

I honestly think that Glock set out to take many of the features of the after market crowd and put them into a factory offering.




www.opspectraining.com

"It's a bold strategy, Cotton. Let's see if it works out for them"



 
Posts: 37304 | Location: Logical | Registered: September 12, 2004Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by jljones:
quote:
Originally posted by Sparkyk:
quote:
Originally posted by jljones:
The new barrel is more accurate. The ones I have shot are a 2 inch gun at 25 instead of a 3-4 inch gun at 25. I have found no issues in cleaning them.
Not intending to derail this thread, but have you used the KKM and/or Bar-Sto barrels and what kind of accuracy did you get of of them? And are you taking about the G17 or G19 Gen 5s?


The new barrels seem to exhibit the same accuracy standards as the custom “drop in” fit barrels from KKM and others. They still aren’t the same grade as what you get from the gunsmith fit Barsto barrels though.

I honestly think that Glock set out to take many of the features of the after market crowd and put them into a factory offering.

Thanks!!
 
Posts: 875 | Location: South Dakota | Registered: May 21, 2013Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by bcjwriter:
You can also shoot lead I hear as well.


Lead was never a problem in a Glock.
 
Posts: 6650 | Registered: September 13, 2006Reply With QuoteReport This Post
Member
Picture of ruger357
posted Hide Post
quote:
Originally posted by jljones:
The new barrel is more accurate. The ones I have shot are a 2 inch gun at 25 instead of a 3-4 inch gun at 25. I have found no issues in cleaning them.

Agree.


-----------------------------------------

Roll Tide!

Glock Certified Armorer
NRA Certified Firearms Instructor
 
Posts: 8042 | Location: Hoover, AL | Registered: November 06, 2006Reply With QuoteReport This Post
A day late, and
a dollar short
Picture of Warhorse
posted Hide Post
All I know is that I shoot my new G19 gen 5 much better than my G23 gen 3.

Probably a combination of things, less powerful caliber, no finger grooves, marksman barrel.


____________________________
NRA Life Member, Annual Member GOA, MGO Annual Member
 
Posts: 13729 | Location: Michigan | Registered: July 10, 2004Reply With QuoteReport This Post
Member
Picture of dc54
posted Hide Post
Has Glock started selling the new barrels by themselves? Should fit previous generations? Take away some of the aftermarket business?


Sigs, HKs, 1911s, Berettas, Glocks and SW revolvers
 
Posts: 1034 | Location: GA | Registered: February 04, 2013Reply With QuoteReport This Post
A teetotaling
beer aficionado
Picture of NavyGuy
posted Hide Post
quote:
Originally posted by dc54:
Has Glock started selling the new barrels by themselves? Should fit previous generations? Take away some of the aftermarket business?


The G19 barrels will fit older version but the G17 Gen 5 barral was changed to have the same lock up lug as the G19 so new style G17 barrels won't fit older versions.



Men fight for liberty and win it with hard knocks. Their children, brought up easy, let it slip away again, poor fools. And their grandchildren are once more slaves.

-D.H. Lawrence
 
Posts: 11524 | Location: Fort Worth, Texas | Registered: February 07, 2007Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    Is the new Glock barrel any more accurate?

© SIGforum 2024