Removing P320 mag. safety disconnect, Cali. version (not the mag release).
Searching online, I only found one how-to video. Apparently removal only involves removing one screw plus the two parts under the screw head. Is this correct? The video is very minimal, so am asking for some advice. https://www.youtube.com/watch?v=zYd4SfshHKYThis message has been edited. Last edited by: c1steve,
-c1steve
November 16, 2023, 11:11 PM
Paten
It seems like it's easily reversible. Why don't you just try it and see?
November 17, 2023, 05:59 AM
Blume9mm
I actually had to make a comment on that video... I don't understand why the person could not have made multiple ones and then picked out the best. At least I hope that is not the best he can do... he fumbled with the Allen wrench 3 times in the beginning trying to remove the bolt and then you really can't see what he does as he fumbles to remove the two parts....then when he's reassembling you get to watch a blank table... geezzz... Sorry, I have no answer for the OP
My Native American Name: "Runs with Scissors"
November 17, 2023, 07:49 AM
Paten
Here's a video where the magazine disconnect is removed and replaced without the poor camera technique. The only drawback is, it's in Chinese. But the procedure looks pretty easy.
Skip ahead to the 8:50 minute mark to see the disconnect removed, the trigger tested and then replaced.
November 17, 2023, 08:58 AM
c1steve
Thanks for the Chinese language video. Part came out easily, and I learned that the Chinese word for magazine is "magazine". ---------------------- Well now the mag will not go all the way in. Stops about 1/2" short.