SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    P226 SAO
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
P226 SAO Login/Join 
Member
posted
I was functioning-checking a number of guns in the safe and thought I had a problem.

Sig P-226. Hammer falls. Trigger goes forward. Sear does not reset. I took it apart, and everything looked good. Then I realized there was no decocker. P-226-S SAO. I never knew Sig made one, but they did.

I'm not sure what problem this gun solves, but it's beautiful.

I would post a picture, but I don't know how.

Unless this works.

This message has been edited. Last edited by: parabellum,
 
Posts: 66 | Registered: May 11, 2018Reply With QuoteReport This Post
Member
posted Hide Post
Thank you, Para, for getting the photo to work.
 
Posts: 66 | Registered: May 11, 2018Reply With QuoteReport This Post
Oriental Redneck
Picture of 12131
posted Hide Post
That’s the German Mastershop’s X5 L1 model, one of the nicest original (1st Gen) Xguns made, imo. Congratulations!

Btw, most of the Xguns are of the SAO type. So, you had a SAO SIG sitting in the safe and never knew it was it? That’s the problem with having too many guns. Razz


Q






 
Posts: 31625 | Location: TEXAS | Registered: September 04, 2008Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by 12131:
That’s the German Mastershop’s X5 L1 model, one of the nicest original (1st Gen) Xguns made, imo. Congratulations!

Btw, most of the Xguns are of the SAO type. So, you had a SAO SIG sitting in the safe and never knew it was it? That’s the problem with having too many guns. Razz


There is some truth to this. Cool
 
Posts: 66 | Registered: May 11, 2018Reply With QuoteReport This Post
I swear I had
something for this
posted Hide Post
That set screw on the trigger also lets you set the length of pull on the gun to fit your hand better. Just loosen it and pull the trigger forward or backwards for the perfect spot.
 
Posts: 5517 | Location: Kansas City, MO | Registered: May 28, 2004Reply With QuoteReport This Post
No, not like
Bill Clinton
Picture of BigSwede
posted Hide Post
Beautiful pistola

I have one as well, yours looks like it may have a longer slide than my "S"



How do you not know you have a 226 X5?


 
Posts: 7118 | Location: GA | Registered: September 23, 2009Reply With QuoteReport This Post
Member
posted Hide Post
I don't know that, but the other side of the slide says P-226 S.

No X-5 markings.
 
Posts: 66 | Registered: May 11, 2018Reply With QuoteReport This Post
Oriental Redneck
Picture of 12131
posted Hide Post
First gen Xguns do not have “XFIVE” marking, only the “S” on the right side of the slide. They are the direct descendants of the earlier Sport models.

Second gen guns (aka the “Enhanced” version) have “XSHORT”, “XFIVE” or “XSIX” on the left side of the slide, depending on the barrel length.


Q






 
Posts: 31625 | Location: TEXAS | Registered: September 04, 2008Reply With QuoteReport This Post
I'd rather be hated for who I am than loved for who I am not
posted Hide Post
you should probably look around and see if you have anything else you forgot about.

I have forgotten ammo caches but high end gun's is next level!
 
Posts: 8375 | Location: Bismarck ND | Registered: February 19, 2003Reply With QuoteReport This Post
Member
posted Hide Post
Hmmmm...it's a little surprising to me that you didn't realize your P226 was SAO, and a relatively rare model as well! I have a P226 SAO Legion (ca. 2016), and I selected that particular model because I'm very familiar with 1911s and this one fit right in. It's an excellent pistol with a great trigger, comfortable to shoot, and it's extremely accurate.
[IMG:left] [/IMG]
 
Posts: 21 | Location: Florida | Registered: March 23, 2016Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by JimboSAO:
Hmmmm...it's a little surprising to me that you didn't realize your P226 was SAO, and a relatively rare model as well! I have a P226 SAO Legion (ca. 2016), and I selected that particular model because I'm very familiar with 1911s and this one fit right in. It's an excellent pistol with a great trigger, comfortable to shoot, and it's extremely accurate.
[IMG:left] [/IMG]


To my brain P-226 says DA/SA. It all came together when i noticed no decocker.

You are right about the trigger. Just excellent.

I'm also a 1911 guy, which is probably why I bought this one.

Outstanding example of a classic Sig.
 
Posts: 66 | Registered: May 11, 2018Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by Ronin101:
you should probably look around and see if you have anything else you forgot about.

I have forgotten ammo caches but high end gun's is next level!


No doubt there are hidden gems back in there. Mine is a walk-in safe with lots of hidden compartments.
 
Posts: 66 | Registered: May 11, 2018Reply With QuoteReport This Post
Baroque Bloke
Picture of Pipe Smoker
posted Hide Post
quote:
So, you had a SAO SIG sitting in the safe and never knew it was it?

So, you had a Mastershop P226 X-Five sitting in the safe and never knew it was it?

Mine, 9mm, is one of the three pistols that I actually shoot. As opposed to some safe queens. So I damn well know I have it. Smile



Serious about crackers.
 
Posts: 12083 | Location: San Diego | Registered: July 26, 2014Reply With QuoteReport This Post
My other Sig
is a Steyr.
Picture of .38supersig
posted Hide Post
Nice!

The earlier model such as yours is preferred by some who don't care for the billboard lettering of the 'enhanced' models.

If you decide to take it apart to clean it, consider that the trigger assembly consists of a dozen or so pieces that go between your finger and the trigger bar.




 
Posts: 10530 | Location: Somewhere looking for ammo that nobody has at a place I haven't been to for a pistol I couldn't live without... | Registered: December 02, 2014Reply With QuoteReport This Post
Oriental Redneck
Picture of 12131
posted Hide Post
quote:
Originally posted by Alpha Bravo:
Mine is a walk-in safe with lots of hidden compartments.

Yours? Razz Big Grin



Q






 
Posts: 31625 | Location: TEXAS | Registered: September 04, 2008Reply With QuoteReport This Post
Baroque Bloke
Picture of Pipe Smoker
posted Hide Post
^^^^
I’d like to see bac1023’s.



Serious about crackers.
 
Posts: 12083 | Location: San Diego | Registered: July 26, 2014Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by 12131:
quote:
Originally posted by Alpha Bravo:
Mine is a walk-in safe with lots of hidden compartments.

Yours? Razz Big Grin





I said walk-in, not live-in.
 
Posts: 66 | Registered: May 11, 2018Reply With QuoteReport This Post
Member
Picture of inspcalahan
posted Hide Post
quote:
Originally posted by JimboSAO:
Hmmmm...it's a little surprising to me that you didn't realize your P226 was SAO, and a relatively rare model as well! I have a P226 SAO Legion (ca. 2016), and I selected that particular model because I'm very familiar with 1911s and this one fit right in. It's an excellent pistol with a great trigger, comfortable to shoot, and it's extremely accurate.
[IMG:left] [/IMG]


Same one I carry at work sometime with a Surefire X300 on it. I also found one of Sig red dot cut slides and installed that with a Trijicon RMR on it. One of the nicest shooting pistols I have and fits right in with all the other 1911 style pistols I enjoy.

I'm not really sure why, as I didn't really buy into the Legion thing much, but on that one the slide just "glides" smoother and with less resistance than any of my other 226's, even though it's the same recoil spring.
 
Posts: 936 | Location: Alaska | Registered: April 29, 2015Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by Pipe Smoker:
quote:
So, you had a SAO SIG sitting in the safe and never knew it was it?

So, you had a Mastershop P226 X-Five sitting in the safe and never knew it was it?

Mine, 9mm, is one of the three pistols that I actually shoot. As opposed to some safe queens. So I damn well know I have it. Smile


It's worse than you know:

 
Posts: 66 | Registered: May 11, 2018Reply With QuoteReport This Post
Member
posted Hide Post
That didn't work.

Hopefully, someone will do what Para did earlier to make that work.

From the top:

P-226-S 9 mm
P-226-S 9 mm
P-220-S .45
P-220-S .45

Beautiful guns; I couldn't resist.

No, they don't get shot much. I have others for that.
 
Posts: 66 | Registered: May 11, 2018Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    P226 SAO

© SIGforum 2026