SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    New to me 229-40-SN
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
New to me 229-40-SN Login/Join 
Member
posted Hide Post
quote:
Originally posted by Mustang-PaPa:
How close to AL12444 is yours?
Looks like they were both from the same production run.


+16. Probably a safe bet.
 
Posts: 225 | Location: SE Pennsylvania | Registered: May 03, 2009Reply With QuoteReport This Post
Member
Picture of tcfiero
posted Hide Post
Without the box denoting a Satin Nickel, how does one go about identifying if you have one? I have an AF serial number 229 that looks like the one by the OP. It has the 40 barrel that looks to be stainless also.
 
Posts: 327 | Location: Jacksonville, FL | Registered: June 12, 2013Reply With QuoteReport This Post
Oriental Redneck
Picture of 12131
posted Hide Post
quote:
Originally posted by tcfiero:
Without the box denoting a Satin Nickel, how does one go about identifying if you have one? I have an AF serial number 229 that looks like the one by the OP. It has the 40 barrel that looks to be stainless also.

Nickel SIGs are fairly easy to recognize. Whether it's factory or not is another matter. To me, a real factory one has to fulfill one of the following.

1- Original owner.
2- Original case/box with confirmation label.
3- SIG confirms for you, in writing, that it is facfory finish. Verbal confirmation means nothing. If it's not in writing, it didn't happen.

Everything else is wishy washy. Ymmv.


Q






 
Posts: 28028 | Location: TEXAS | Registered: September 04, 2008Reply With QuoteReport This Post
Firearms Enthusiast
Picture of Mustang-PaPa
posted Hide Post
quote:
Originally posted by sean7:
quote:
Originally posted by Mustang-PaPa:
How close to AL12444 is yours?
Looks like they were both from the same production run.


+16. Probably a safe bet.


Yes i bet they were a small run.

Yours is the first i recall ever reading about here on the forum from the same batch of serial numbers and with the stainless steel Bbl.
I recall other members with all SN 229 coatings but not “AL” and stainless bbls.


The all stainless factory bbls are uncommon. I have seen them from the same or close years in the 226/9 & 220/45 over the years here but not that many.


Enjoy yours and shoot it. Also pick up a 357sig bbl if you want to shoot that rd.
 
Posts: 18181 | Location: South West of Fort Worth, Tx. | Registered: December 26, 2008Reply With QuoteReport This Post
7.62mm Crusader
posted Hide Post
Sean7 can you post us a few more pics please? I think it would be sweet if they came with a stainless barrel as Mustang states. Any comments of the gun with stainless barrel Q?
 
Posts: 17999 | Location: The Bluegrass State! | Registered: December 23, 2008Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by David Lee:
Sean7 can you post us a few more pics please? I think it would be sweet if they came with a stainless barrel as Mustang states. Any comments of the gun with stainless barrel Q?


Sure. Here's a couple more.
https://www.amazon.com/photos/...fyJUEuFVCZ0S7jsy6fBq
 
Posts: 225 | Location: SE Pennsylvania | Registered: May 03, 2009Reply With QuoteReport This Post
Age Quod Agis
Picture of ArtieS
posted Hide Post
Wow, that's nice.



"I vowed to myself to fight against evil more completely and more wholeheartedly than I ever did before. . . . That’s the only way to pay back part of that vast debt, to live up to and try to fulfill that tremendous obligation."

Alfred Hornik, Sunday, December 2, 1945 to his family, on his continuing duty to others for surviving WW II.
 
Posts: 13013 | Location: Central Florida | Registered: November 02, 2008Reply With QuoteReport This Post
Member
posted Hide Post
The one pictured in the amazon photo is not a Sig Gun of the Month.
The Sig Gun of the Month was put out in June, 2004.
A number of P229's were coated similar to the P229 GOTM but were not done or sold by Sig.

Look closely at the take down lever. It's flat, yes? That is a good visual key that it is not a Sig GOTM.
When Sig put out the GOTM, they were made with a "stepped" take down lever to help reduce scratching the frame in the dis-assembly process.
 
Posts: 162 | Registered: July 13, 2006Reply With QuoteReport This Post
Member
posted Hide Post
I have AL12466 with the stainless bbl. Always thought it was the GOTM until reading this thread... I use an EKG Fire Dragon 9mm conversion barrel with it and it shoots great.
 
Posts: 912 | Location: Texas | Registered: January 05, 2009Reply With QuoteReport This Post
Oriental Redneck
Picture of 12131
posted Hide Post
quote:
Originally posted by Happychi:
The one pictured in the amazon photo is not a Sig Gun of the Month.
The Sig Gun of the Month was put out in June, 2004.
A number of P229's were coated similar to the P229 GOTM but were not done or sold by Sig..

OP's gun, although not GOTM, was sold by SIG as factory Ni. So is Mustang-PaPa's gun. Btw, none of the factory Ni guns were done in-house by SIG. They were all farmed out to be Nickel plated.


Q






 
Posts: 28028 | Location: TEXAS | Registered: September 04, 2008Reply With QuoteReport This Post
I can't tell if I'm
tired, or just lazy
Picture of ggile
posted Hide Post
quote:
Originally posted by David Lee:
12131, why can I never see your photos here in Sig Forum? Just the little box or nothing at all. Same with your Colt ad, no photos.


I have the same problem!!


_____________________________

"The problems we face today exist because the people who work for a living are outnumbered by those who vote for a living."

"Those who would give up essential liberty to purchase a little temporary safety deserve neither liberty nor safety"
Benjamin Franklin
 
Posts: 2116 | Location: South Dakota-pheasant country | Registered: June 20, 2005Reply With QuoteReport This Post
Oriental Redneck
Picture of 12131
posted Hide Post
quote:
Originally posted by 12131:
Whether OP's gun is GOTM or not, I don't know. But, fyi, not all GOTMs will have the month/year on the label indicating it's a GOTM.
Here is the April '04 GOTM, the P228 with Hi-Viz front and comes with one P226 mag with the Freed grip adapter. The label gives no hints that it is a GOTM.



I just happened to go through the >> GOTM link << and notice an interesting factoid. None of the 2003 and 2004 GOTMs have the MonthYear in their Part Numbers. Only the 2005 GOTMs have them MonthYear in the Part Numbers.

2003
Month: April
Part Number: 226-9-B-XPBM


Month: May
Part Number: 226-40-B-SOG


Month: June
Part Number: SP2009-9-B-PS


Month: July
Part Number: 228-9-CAMO


Month: August
Part Number: H90103ELEY


Month: September
Part Number: 229-40-CAMO
Cancelled due to problems with the finish.


Month: October
Part Number: 220-45-S-NILLS


Month: November
Part Number: 229-9-BLG


Month: December
Part Number: 232-380-S-GOLD




2004
Month: January
Part Number: H90104RD


Month: February
Part Number: 226-40-STR


Month: March
Part Number: 225-9-RB


Month: April
Part Number: 228-9-HV


Month: May
Part Number: 239-40-RBT


Month: June
Part Number: 229-40-SN


Month: July
Part Number: 220-45-SCS


Month: August
Part Number: 229-40-ESG


Month: September
Part Number: 232-380-NMR


Month: October
Part Number: 226-9-BLG


Month: November
Part Number: 220-45-SKC


Month: December
Part Number: 229-40-DS




2005
Month: January
Part Number: 229R-9-JAN05


Month: February
Part Number: 245-45-FEB05


Month: March
Part Number: 220R-45-MAR05


Month: April
Part Number: 239-40-APR05


Month: May
Part Number: 1911-45-MAY05
Cancelled due to manufacturing concerns, strong interest reported, possibly to be reintroduced at a later date.


Month: June
Part Number: 229-40-JUN05


Month: July
Part Number: 232-38-JUL05


Month: August
Part Number: 226R-9-AUG05


Month: September
Part Number: 220-45-SEP05


Month: October
Part Number: 239-40-OCT05


Month: November
Part Number: 228-9-NOV05


Month: December
Part Number: 226-40-DEC05
Cancelled due to supply issues with Oakley.


Q






 
Posts: 28028 | Location: TEXAS | Registered: September 04, 2008Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    New to me 229-40-SN

© SIGforum 2024