SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    P228 Slide on a P229
Go
New
Find
Notify
Tools
Reply
  
P228 Slide on a P229 Login/Join 
Member
posted
Hi everyone, this is my first post here. I only have 2 Sigs, but they are both great guns. I have a West German P220 in .45ACP and a P229 in .40 S&W.

I recently picked up a P228 9mm upper that I would like to be able to use on my P229. I believe all I need is the correct locking block/insert. MGW had a phosphated version pretty inexpensive, so I ordered it, but unfortunately they sent me a .40/.357Sig one by mistake. They said they were all out of the inexpensive P228 9mm locking blocks so refunded me my money.

Here is my P229 and P228 slide. The P228 slide has a 228/9 NM (national match) threaded chrome barrel in it.



Would someone please confirm that what I need is a P228 locking block to mount the 9mm slide onto my P229. Is there an inexpensive source for one?

Thanks
 
Posts: 264 | Registered: September 12, 2021Reply With QuoteReport This Post
Firearms Enthusiast
Picture of Mustang-PaPa
posted Hide Post
Yes you need the 9mm locking block to use the 228 slide on your P229/40-357 frame.

I have a P228/9mm slide and locking block to use on any of my P229/40-357 frames.

I also have a Barsto conversion Bbl that allows me another way to shoot 9mm out of my P229/40-357 frames.

Also about 9mm mags, the straight sided 9mm mags will work but I prefer the P229/9mm bottle neck mags that are an exact match to the P229/40-357 frames.

and Welcome to that best place on the net!
 
Posts: 18016 | Location: South West of Fort Worth, Tx. | Registered: December 26, 2008Reply With QuoteReport This Post
Member
posted Hide Post
Thanks for the confirmation Mustang-PaPa,

I'm on the hunt for a P228 locking block.


Have you ever tried to shoot 9mm from your .40 mags? I've read that they work fine, but won't get to try it until I get the correct locking block.
 
Posts: 264 | Registered: September 12, 2021Reply With QuoteReport This Post
avoiding birthday parties
Picture of fjgiie
posted Hide Post
I would like to know if you have the P228 barrel that came with the P228 slide? Did the 228 slide come with the National Match barrel only?
I have a few of German I think P228 three dot Locking Inserts. One Locking insert is used in good shape. Also extra other P228 parts from two gun Jay. (recoil spring is plain with no paint)
0 I myself do not own a .40S&w P229 pistol so I am not sure about the 228 slide assembly working.
My E-mail address is in my profile. Your's is not in your profile. Talk to me for a good time. Smile

translation: good Locking insert for free; will outlast the frame
 
Posts: 1366 | Registered: March 05, 2010Reply With QuoteReport This Post
Member
posted Hide Post
fjgiie,

The slide only came with the threaded NM marked barrel, no stock barrel included.

I'll send you an email about the locking block
 
Posts: 264 | Registered: September 12, 2021Reply With QuoteReport This Post
Firearms Enthusiast
Picture of Mustang-PaPa
posted Hide Post
quote:
Originally posted by clang:
Have you ever tried to shoot 9mm from your .40 mags? I've read that they work fine, but won't get to try it until I get the correct locking block.


I have not as I have always had P228/9mm mags. Had my P228 before I ever bought all the P229's I own now.
 
Posts: 18016 | Location: South West of Fort Worth, Tx. | Registered: December 26, 2008Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by Mustang-PaPa:

I have not as I have always had P228/9mm mags. Had my P228 before I ever bought all the P229's I own now.


Thanks - It looks like I will have to try it and report back to everyone.
 
Posts: 264 | Registered: September 12, 2021Reply With QuoteReport This Post
Member
Picture of powermad
posted Hide Post
I've used 9mm in 229 .40 mags with a 228 slide on a 229-1/.40 Cal frame, using a 228 locking insert.

Seemed to work at the range without any drama.
The 9mm mags for that frame are the 229-1 ones.
 
Posts: 1470 | Location: Portland Oregon | Registered: October 01, 2011Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by powermad:
I've used 9mm in 229 .40 mags with a 228 slide on a 229-1/.40 Cal frame, using a 228 locking insert.

Seemed to work at the range without any drama.
The 9mm mags for that frame are the 229-1 ones.


Thanks powermad. I'll try the .40 mags first, but I'll be on the lookout for some 9mm P229-1 mags.
 
Posts: 264 | Registered: September 12, 2021Reply With QuoteReport This Post
Member
posted Hide Post
I received a package from fjgiie and he sent me a bunch of goodies:



P228 locking block/insert
P228 barrel, spring and guide rod
some decocking lever shims in different thicknesses

Everything appears to work great, both the threaded and non-threaded barrel work in the P228 slide with the new locking block. 9mm rounds manually cycle through the action smoothly. I'll get it to the range soon and report back on live firing the gun.






The shims are a great addition - I put one on my P229 and it made the decocking lever much smoother. I used an extra one to put on my old P220 with similar results. I used a 0.007" shim on both guns:




A big Thank You to fjgiie and everyone else that shared info!
 
Posts: 264 | Registered: September 12, 2021Reply With QuoteReport This Post
Member
posted Hide Post
UPDATE: I finally got to try out the gun with the P228 slide. It functioned perfectly with both 9mm barrels.

I used my .40/.357 Sig mags when shooting. I can fit 15 9mm rounds in a mag. I will eventually get a few P229-1 9mm mags, but for the range the .40 mags worked fine.
 
Posts: 264 | Registered: September 12, 2021Reply With QuoteReport This Post
Member
posted Hide Post
I bought a 229 slide within the last two years, a complete slide in 9mm with a Romeo already installed from the factory. This is the long extractor slide with a barrel marked 229-1. It worked fine on my 228.

Last winter I bought a 229 in .40 and I believe this is a 229-1. The same 9mm slide with the red-dot worked fine on the .40 frame.

I think I read above that the 228 slide on the 229 frame will not work without that locking block change. But I used a 229-1 slide on my 228. Is the problem only a one-way problem?

Bart Noir
Don’t call them “illegal guns”. Call them “undocumented weapons” and let them live in sanctuary homes.
 
Posts: 22 | Location: Soggy Puget Sound | Registered: October 30, 2007Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  SIG Pistols    P228 Slide on a P229

© SIGforum 2024