Disclaimer* I have no affiliation with ANY manufacturers nor am I asking on behalf of ANY company. We're lucky enough to have a company that offers simple, concise, and trustworthy opinions to its customers, this question comes from such a conversation where neither of us could accurately answer this question.<BR><BR>Would an aftermarket P225 frame (Read P225/P6, not A1) be desired by folks?<BR><BR>I ask after speaking with a company and the concern was, if they make frames where will folks go for what seems to be a limited amount of aftermarket parts. There is some parts overlap with other more popular P-Series pistols, but also unique parts.<BR><BR>Do you feel there are enough parts out there to validate making frames?Would you buy a P225 frame?Yes, I have spare partsYes, I know exactly where to go for spare partsNo, I wouldn't want to chase down the scarce partsNo, I just don't want one

Withholding my vote for the moment - threads like this have surprised me before with the information that turns up.

FWLIW, I'd personally prefer the A1 frame just because there's a little more room for those of us with fat hands and fat trigger fingers.

Either way, IMHO the next big question is: where do you find slides? Other parts of the pistol itself might be findable.

The next big question after that is magazines - recent 225/P6 buyers seem to have found those scarce.

I've bought and sold a handful of P225s over the years, still like them today........but my biggest issue has always been price of mags.

Availability was alleviated somewhat a few years back when all the P6 mags came in from overseas, but seems to have dried up again?

So, my answer for an aftermarket frame purchase would be impacted by mag $$ & sourcing of parts.

This message has been edited. Last edited by: soflaac,

That's a negative full stop from me. With options like a Commander 1911 or the P210 Carry, I've lost interest in a P225 or a version of a S&W 39 in DA/SA.

Personally I love the P225 but I have no need for an aftermarket frame for one, and seriously doubt the market would support it in todays micro-compact double-stack "high-capacity" carry pistol world.

I would tend to agree that the lack of spare parts, particularly magazines, would make this a non-starter.

That was the No. 1 question to be answered.

"Is there enough support for the scarce parts out there to warrant making frames?"

I think that answer is looking like a NO.

I love my P225 and of all the Sigs I own, it is the most accurate for me. But I voted no. The earlier post about magazine availability is true and unless Sig offers mags factory new again, I will just keep the 225 I own now.
My P-07 is nearly the same size as my 225 and with higher capacity.

What about slides don't see a huge number available? P-225/P-6 mags have costed above average for quite a while due to the demand. If not now soon to be the P-225/P-6 will be in collector status. I'd be more likely to invest in an all original P-225/P-6 even if the price was higher. Sig did something right the first time around.

Same answer: "Not enough small parts. And, frankly, despite having its fan club, no one is going to crank up machinery for a big single stack 9 these days. The P225's days are long long ago."

I would be interested if any parts were available. The last time I found something for the 225/P6 was an aftermarket barrel and those are no longer made. Years ago there was a company in Germany that had parts, but I lost their web address.

+

I really like the 225 and have one. I keep it for what it is, a classic single stack sig. It's a bit of nostalgia but not much more. I can't justify the cost it would take to build or buy another one unless it was a crazy low price. There's too many better options for carry pistols now days.

quote:

Originally posted by 12131:
Same answer: "Not enough small parts. And, frankly, despite having its fan club, no one is going to crank up machinery for a big single stack 9 these days. The P225's days are long long ago."

And this is why I am sad.

quote:

Originally posted by 12131:
[N]o one is going to crank up machinery for a big single stack 9 these days.

I wish someone (MecGar) would; I've been on a single-stack 9mm binge lately and batch runs for a few different models (just go on fleabag or itsy and see what's going for more than $80 a pop) would certainly seem very likely to sell out.

yes, I'd like an aftermarket P225 frame like ala Matrix Precision etc.

and as always it'd be neat if SIG would crank a few more P225A's/P239s/P227s/P224's out.... even if they were special editions no rainbow

I would have no interest in a frame.

I voted no because I already have 2 originals, with several mags.
If I had none AND a source for parts, I MIGHT be interested.
When Sig did the P225A1 a few years back, they screwed up. They should have made it so it at least used the same mags. I definitely would have purchased some mags at a minimum and probably a gun.

I would be more interested in a source of quality magazines than a frame. My 225 is quite accurate and reliable, very concealable, which would make it a great carry gun. However, mine is pristine and fairly valuable (likely to increase too), which makes it a safe queen and not likely to need a frame, because I don’t shoot it. And frankly, the trigger is somewhere north of 12 pounds.

The 225A1 is a better carry gun for me, feels better, better sights, better trigger, better ergonomics. But the 365XL puts them both to shame as a carry gun.

If they also make the slide, barrel, internals and magazines, yes. I’d be interested.

I can’t imagine there’s many P225’s out there with broken frames.