SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Auto Mechanic advice needed, Toyota Tacoma
Page 1 2 3 4 5 6 
Go
New
Find
Notify
Tools
Reply
  
Auto Mechanic advice needed, Toyota Tacoma Login/Join 
Peace through
superior firepower
Picture of parabellum
posted Hide Post
It's difficult to see, but looking closely with a flashlight and a magnifier, it does look like that alternator fuse is blown.

I guess I could try what's shown in the video.

If that fuse is blown, would it account for the vehicle not coming out of park? The alternator is in the circuit path for what?
 
Posts: 109775 | Registered: January 20, 2000Reply With QuoteReport This Post
Shaman
Picture of ScreamingCockatoo
posted Hide Post
quote:
Originally posted by parabellum:
It's difficult to see, but looking closely with a flashlight and a magnifier, it does look like that alternator fuse is blown.

I guess I could try what's shown in the video.

If that fuse is blown, would it account for the vehicle not coming out of park? The alternator is in the circuit path for what?


It's the main path through the entire electrical circuit.

I won't tell you to drill out the top of the fuse and screw a fitting bolt down in it...





He who fights with monsters might take care lest he thereby become a monster.
 
Posts: 39920 | Location: Atop the cockatoo tree | Registered: July 27, 2002Reply With QuoteReport This Post
Peace through
superior firepower
Picture of parabellum
posted Hide Post
These larger fuses like #45 here: https://www.startmycar.com/toy...ma/info/fusebox/2007

Are these supposed to be user replaceable? I can see that the ABS fuse is blown. I tried pulling on it but naturally want to be careful. Do I just need to pull harder?

If I can change out the alternator fuse myself, and get this thing going again, that would be great. In my younger days, I did a bit of mechanic work on my cars, but never would I say I really knew what I was doing.
 
Posts: 109775 | Registered: January 20, 2000Reply With QuoteReport This Post
Shaman
Picture of ScreamingCockatoo
posted Hide Post
Some of these modern fuses are held in pretty tight by their connectors to ensure they don't vibrate loose and resist corrosion through a light connection.


Pull harder, you'll know if it's bolted in from the sides.
I'm wagering it's not.


Mars and I just finished up a full engine swap on a 2003 Nissan Frontier, electronics and all.
That was tough work... I'm still sore.





He who fights with monsters might take care lest he thereby become a monster.
 
Posts: 39920 | Location: Atop the cockatoo tree | Registered: July 27, 2002Reply With QuoteReport This Post
Peace through
superior firepower
Picture of parabellum
posted Hide Post
Thanks to all of you who've helped. Really appreciate it very much.

SC, you mentioned employees who might be able to address this. If you've got someone who could pay a visit instead of my having to have it towed to be sexually assaulted by a garage, I'd be delighted to pay for that privilege, even if it takes a while to get to it.
 
Posts: 109775 | Registered: January 20, 2000Reply With QuoteReport This Post
Member
Picture of Greymann
posted Hide Post
My quess is the starter relay may have burned up.
You might be able to swap the horn relay with the starter relay if they are same.



.
 
Posts: 1698 | Location: New Mexico | Registered: March 21, 2017Reply With QuoteReport This Post
Peace through
superior firepower
Picture of parabellum
posted Hide Post
If so, it would be in addition to the alternator fuse, because that fuse is blown for sure.

The fuse he mentioned in the passenger compartment- I checked it and it's OK. AM1 and AM2 also appear to be OK.
 
Posts: 109775 | Registered: January 20, 2000Reply With QuoteReport This Post
Inject yourself!
posted Hide Post
I wish I was closer.

It’s a bit fidely but not as complex as a Ruger MKII pistol.




Do not send me to a heaven where there are no dogs.
Step Up or Stand Aside: Support the Troops !
Expectations are premeditated disappointments.
 
Posts: 8393 | Location: West | Registered: November 26, 2002Reply With QuoteReport This Post
Down With The Sickness
Picture of Sclass
posted Hide Post
quote:
Originally posted by parabellum:
It's difficult to see, but looking closely with a flashlight and a magnifier, it does look like that alternator fuse is blown.

I guess I could try what's shown in the video.

If that fuse is blown, would it account for the vehicle not coming out of park? The alternator is in the circuit path for what?


A vehicle with a dead battery won't come out of park so a break in the circuit could produce that result. There will be a shift lock override button somewhere near the shifter that will allow you to shift without power, usually so you can get into neutral to push.
 
Posts: 666 | Location: Peoria, AZ | Registered: December 24, 2003Reply With QuoteReport This Post
Peace through
superior firepower
Picture of parabellum
posted Hide Post
quote:
There will be a shift lock override button somewhere near the shifter that will allow you to shift without power, usually so you can get into neutral to push.
Hell, I didn't even know about this and I've owned this truck for 17 years

Shift Lock Override

I'll check it out tomorrow.
 
Posts: 109775 | Registered: January 20, 2000Reply With QuoteReport This Post
Member
Picture of Greymann
posted Hide Post
I looked at your relay part number and you don't have one to swap around.




.
 
Posts: 1698 | Location: New Mexico | Registered: March 21, 2017Reply With QuoteReport This Post
Peace through
superior firepower
Picture of parabellum
posted Hide Post
I guess I should assume that this relay is burnt and buy one along with the alternator fuse and the ABS fuse.

What's that relay part number?

I found on Amazon what I thought was the correct alternator fuse. 120 amp, looks like the right part but the Amazon parts guide say that it won't fit.

I suppose my local Auto-Zone can sort out the part number for me.
 
Posts: 109775 | Registered: January 20, 2000Reply With QuoteReport This Post
Ammoholic
posted Hide Post
quote:
Originally posted by bigpond73:
I don't know much about Toyotas. But I do know you can check the fuses with a digital voltmeter.

Set the meter to ohms. You should not get a reading on the meter with the leads apart, but should get a reading (zero) with them touching. So, pop out a fuse, since it is hard to tell if they are blown or not, and put the leads on the back of the fuse where the 2 metal prongs are. If you get a reading (0, 1, whatever), your fuse is not blown. No reading, and it is.

As far as getting them out, yep, sometimes they are stuck in there. Try using some needle nose pliers, if they are closely packed in, or just a regular pair of pliers.

Might help. Good luck, I hate tracking down electrical gremlins.
yeah, you can read ohms, or if you’re lazy like me you can check for continuity. Touch the two leads together and get a beep, separate them and all is quiet. As you touch opposite blades on the fuses (or the reverse end if you’re lazy and don’t bother pulling them) you’ll get tone if they’re good, silence if they’re blown.
 
Posts: 7183 | Location: Lost, but making time. | Registered: February 23, 2011Reply With QuoteReport This Post
Peace through
superior firepower
Picture of parabellum
posted Hide Post
I don't have one of those gadgets but perhaps I should get one.

Do any of you have a recommendation for one that's functional but not extravagantly priced?
 
Posts: 109775 | Registered: January 20, 2000Reply With QuoteReport This Post
Savor the limelight
posted Hide Post
Apparently, there are clips around the fuse box housing that will release the fuse block allowing you to lift it up high enough to remove the bolts for the alternator fuse:



I'm guessing the one nut left of the fuse (when standing in front of the truck) would also have to be removed.
 
Posts: 11846 | Location: SWFL | Registered: October 10, 2007Reply With QuoteReport This Post
Member
Picture of Greymann
posted Hide Post
Toyota starter relay part
#28300-0A011
I think it's made by denso.
Pricey from Toyota of course.

https://toyota.oempartsonline....lectrical-components


https://toyota.oempartsonline....U9NC0wbC12Ni1nYXM%3D
 
Posts: 1698 | Location: New Mexico | Registered: March 21, 2017Reply With QuoteReport This Post
186,000 miles per second.
It's the law.




posted Hide Post
Hi Para. I have a first gen 2000 Tacoma 2.7L 5 speed. I accidentally reversed the cables when jumping it a couple of years ago and had the same symptoms. I fried the main fusible link fuse and it was bolted in and difficult to change. It looked like this (below). I dont know what year your Tacoma is, but you might Google "how to change fusible link" in whatever year and engine truck you have. I had to remove the fusebox to get to the bolt that was anchoring in the FL main fuse.

https://www.ebay.com/itm/18672...ghnht_ewCbbXvt5cBykg
https://parts.lakelandtoyota.c...&feedLabel=cvb_parts
 
Posts: 3285 | Registered: August 19, 2001Reply With QuoteReport This Post
Shaman
Picture of ScreamingCockatoo
posted Hide Post
quote:
Originally posted by FishOn:
Hi Para. I have a first gen 2000 Tacoma 2.7L 5 speed. I accidentally reversed the cables when jumping it a couple of years ago and had the same symptoms. I fried the main fusible link fuse and it was bolted in and difficult to change. It looked like this.

https://www.ebay.com/itm/18672...ghnht_ewCbbXvt5cBykg
https://parts.lakelandtoyota.c...&feedLabel=cvb_parts


I'm quite confident this is the problem also.
If I wasn't so busy during the week, I'd make a roadtrip out there and do it myself.



Annnnnd my mailserver just went down.





He who fights with monsters might take care lest he thereby become a monster.
 
Posts: 39920 | Location: Atop the cockatoo tree | Registered: July 27, 2002Reply With QuoteReport This Post
Peace through
superior firepower
Picture of parabellum
posted Hide Post
This is the part we've been referring to as the alternator fuse, yes?
quote:
Originally posted by FishOn:
I dont know what year your Tacoma is, but you might Google "how to change fusible link"
This video: https://www.youtube.com/watch?v=aUnXxWYtf2A

shows what I have. The part of the video where he has to crack the case- I think this wrench is the answer: https://www.amazon.com/gp/prod...A33L0O1J6GMEUP&psc=1

The other bolt looks like you can get a ratchet in there.

I don't think I'll have to remove the fusebox altogether. As a matter of fact, I'm not sure why the guy in that video loosened the mounting bolts for it. Maybe I'm missing something.


____________________________________________________

"I am your retribution." - Donald Trump, speech at CPAC, March 4, 2023
 
Posts: 109775 | Registered: January 20, 2000Reply With QuoteReport This Post
Shaman
Picture of ScreamingCockatoo
posted Hide Post
Yes.

My mail server just went down. Again...

I contacted my brother.
If you can hang on until Saturday, we can come replace the fuse and diagnose the truck.





He who fights with monsters might take care lest he thereby become a monster.
 
Posts: 39920 | Location: Atop the cockatoo tree | Registered: July 27, 2002Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2 3 4 5 6  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Auto Mechanic advice needed, Toyota Tacoma

© SIGforum 2024