SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Some old outboard two stroke mixed gas. Run in the X500 JD mower. c
Go
New
Find
Notify
Tools
Reply
  
Some old outboard two stroke mixed gas. Run in the X500 JD mower. c Login/Join 
Green grass and
high tides
Picture of old rugged cross
posted
I have two containers. About 1.75 gallons each. One is a bit older (nastier) than the other. I need to get rid of it. I would use to light slash piles but our burn season is over. The newer of the two I would think would be no problem mixing in with good gas to run through the Kawasaki engine. The other batch I dunno? thoughts



"Practice like you want to play in the game"
 
Posts: 21564 | Registered: September 21, 2005Reply With QuoteReport This Post
Member
posted Hide Post
I disposed of old 2 stroke gas by burning it in my pickup. The truck tank capacity is 34 gal, so ~1gal of old gas never caused any issues.
 
Posts: 311 | Location: Canyon Lake, TX | Registered: December 22, 2008Reply With QuoteReport This Post
Member
Picture of wrightd
posted Hide Post
bad idea. don't burn that shit in a good engine like that. It's like drinking cheap wine on the verge of turning into vinegar. Except the bad gas will degrade the fuel system of your engine. For what, to save $3 bucks? Really ?




Lover of the US Constitution
Wile E. Coyote School of DIY Disaster
 
Posts: 9965 | Location: Nowhere the constitution is not honored | Registered: February 01, 2008Reply With QuoteReport This Post
Member
Picture of 4MUL8R
posted Hide Post
Seriously? Just take it to the local dump and pour it in the recyling drum for used lubricants and engine oils. I mean, this is a simple problem that requires no thought. Don't put 2-smoke oil + gas in a 4-stroke engine.


-------
Trying to simplify my life...
 
Posts: 6112 | Location: Commonwealth of Virginia | Registered: January 15, 2007Reply With QuoteReport This Post
Savor the limelight
posted Hide Post
The obvious answer is don’t do it especially not in an engine that doesn’t have fancy electronics to retard timing to minimize detonation.

The real question is: How do you dispose of old gasoline? How 20 about gallons or more?
 
Posts: 14372 | Location: SWFL | Registered: October 10, 2007Reply With QuoteReport This Post
I started with nothing,
and still have most of it
Picture of stiab
posted Hide Post
I have burned it in our highway vehicles, on the advice of my mechanic, and there were no problems.We have changed boats/motors/tanks four times in the last 10 years, so it comes up fairly frequently.


"While not every Democrat is a horse thief, every horse thief is a Democrat." HORACE GREELEY
 
Posts: 2035 | Location: Central NC | Registered: May 18, 2005Reply With QuoteReport This Post
Member
posted Hide Post
Save it until next burn season.
 
Posts: 2853 | Location: WI | Registered: December 29, 2012Reply With QuoteReport This Post
"Member"
Picture of cas
posted Hide Post
Burn with the old stuff.
Pour the newer stuff in before you fill up.


(Of course, I once ran a car on two-stroke mixed gas exclusively for a good 8-10 months. lol)
 
Posts: 22150 | Location: 18th & Fairfax  | Registered: May 17, 2003Reply With QuoteReport This Post
Member
posted Hide Post
quote:
I have burned it in our highway vehicles, on the advice of my mechanic

Get a new mechanic asap. At least if your "highway vehicles" are modern emission engines. Two stroke oil has the potential to damage very very expensive catylitic converters.


“So in war, the way is to avoid what is strong, and strike at what is weak.”
 
Posts: 11825 | Registered: October 14, 2004Reply With QuoteReport This Post
Member
posted Hide Post
quote:
The real question is: How do you dispose of old gasoline? How 20 about gallons or more?

I have found two ways. Periodically we have haz mat days and they will often take it. I live in the cold north and many shops run used oil and gas burners to save money. They can often take it and burn it. I don't know if that option exists in warmer climates.


“So in war, the way is to avoid what is strong, and strike at what is weak.”
 
Posts: 11825 | Registered: October 14, 2004Reply With QuoteReport This Post
I started with nothing,
and still have most of it
Picture of stiab
posted Hide Post
quote:
Originally posted by stiab:
quote:
Originally posted by stiab:
[QUOTE]Originally posted by hrcjon:
[QUOTE]I have burned it in our highway vehicles, on the advice of my mechanic

Get a new mechanic asap. At least if your "highway vehicles" are modern emission engines. Two stroke oil has the potential to damage very very expensive catylitic converters.

Not necessary, a few gallons spread among four vehicles burns on the highway just fine and dandy. You may be unaware of the SMALL amount of oil required by recent 2 cycle outboards, not like yesteryear.


"While not every Democrat is a horse thief, every horse thief is a Democrat." HORACE GREELEY
 
Posts: 2035 | Location: Central NC | Registered: May 18, 2005Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by wrightd:
bad idea. don't burn that shit in a good engine like that. It's like drinking cheap wine on the verge of turning into vinegar. Except the bad gas will degrade the fuel system of your engine. For what, to save $3 bucks? Really ?


I recently retired from 30+ years of boat repair. I've "disposed" of a lot of old gas this way. And it's not really about saving $3. How do you responsibly dispose of old gas? Hazmat collection around here is virtually non existent. Some burn it on their brush pile. I burn it in my truck. None of my work trucks had any fuel system related problems.
 
Posts: 311 | Location: Canyon Lake, TX | Registered: December 22, 2008Reply With QuoteReport This Post
Member
Picture of sourdough44
posted Hide Post
My thoughts would be to save it for future brush burning, won’t get to old for that.

If fairly fresh, I wouldn’t have a problem mixing it with fuel in a highway vehicle, maybe older the better. How about a little in a mower, if you do that.

I burn brush at times, good way to get rid of many things.
 
Posts: 7393 | Location: WI | Registered: February 29, 2012Reply With QuoteReport This Post
Member
posted Hide Post
I wouldn't risk it........why, to save a few dollars? Get rid of it.......pour a little at a time on rocks and let it evaporate.
 
Posts: 21740 | Registered: June 12, 2005Reply With QuoteReport This Post
Member
posted Hide Post
quote:
You may be unaware of the SMALL amount of oil required by recent 2 cycle outboards, not like yesteryear.

I'm fully aware of 2 stroke oil mix ratios. I'm also fully aware of the cost of modern cats. So who in their right mind would take the risk of a couple of gallons of bad gas possibly destroying a couple of thousands of dollars of cats. Makes zero sense to me even if you personally have gotten away with it. Burn it, bury it, recycle it, use it on your burn pile, put it in your $200 lawnmower, whatever, but don't put in your emissions controlled vehicle. That's beyond stupid.


“So in war, the way is to avoid what is strong, and strike at what is weak.”
 
Posts: 11825 | Registered: October 14, 2004Reply With QuoteReport This Post
Green grass and
high tides
Picture of old rugged cross
posted Hide Post
Ok guys, appreciate the thoughts and advice.



"Practice like you want to play in the game"
 
Posts: 21564 | Registered: September 21, 2005Reply With QuoteReport This Post
I started with nothing,
and still have most of it
Picture of stiab
posted Hide Post
quote:
Originally posted by hrcjon:
That's beyond stupid.

You have your opinion based on zero actual experience, I have my opinion based on actual experience with a 1 to 100 oil mix, that was not "bad gas" as you describe it. Your opinion is only that, an opinion, and does not make other opinions "stupid".


"While not every Democrat is a horse thief, every horse thief is a Democrat." HORACE GREELEY
 
Posts: 2035 | Location: Central NC | Registered: May 18, 2005Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Some old outboard two stroke mixed gas. Run in the X500 JD mower. c

© SIGforum 2026