SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Replacement lids for 32oz & 64 oz insulated containers
Go
New
Find
Notify
Tools
Reply
  
Replacement lids for 32oz & 64 oz insulated containers Login/Join 
I Am The Walrus
posted
I have these and they've seen a good amount of use. The gaskets on the inside have started to deform from years of use and therefore aren't sealing.

https://www.walmart.com/ip/Oza...-Mouth-Lid/131683847

What alternatives do I have to replacing these? Walmart doesn't sell the lid/gasket. Looked in store and online.


_____________

 
Posts: 13047 | Registered: March 12, 2005Reply With QuoteReport This Post
Not really from Vienna
Picture of arfmel
posted Hide Post
Depending on the design of the sealing surface you might find an O-ring at a good hardware store or plumbing supply that will work.
 
Posts: 26852 | Location: Jerkwater, Texas | Registered: January 30, 2007Reply With QuoteReport This Post
Only the strong survive
Picture of 41
posted Hide Post
It is a flat gasket and you could get one of these which bigger and cut it down.


https://www.walmart.com/ip/2-P...Straw-Bran/494372126


41
 
Posts: 11828 | Location: Herndon, VA | Registered: June 11, 2009Reply With QuoteReport This Post
אַרְיֵה
Picture of V-Tail
posted Hide Post
https://www.amazon.com/Replace...kitchen&sr=1-54&th=1



הרחפת שלי מלאה בצלופחים
 
Posts: 30545 | Location: Central Florida, Orlando area | Registered: January 03, 2010Reply With QuoteReport This Post
Only the strong survive
Picture of 41
posted Hide Post
That's too big. They don't seem to make the smaller gasket so just buy a new top.

https://www.walmart.com/ip/Oza...cement-Lid/914288314


41
 
Posts: 11828 | Location: Herndon, VA | Registered: June 11, 2009Reply With QuoteReport This Post
Wait, what?
Picture of gearhounds
posted Hide Post
quote:
Originally posted by 41:
That's too big. They don't seem to make the smaller gasket so just buy a new top.

https://www.walmart.com/ip/Oza...cement-Lid/914288314

This. If you really like the bottle, and cannot source a generic replacement, this is your best bet.




“Remember to get vaccinated or a vaccinated person might get sick from a virus they got vaccinated against because you’re not vaccinated.” - author unknown
 
Posts: 15501 | Location: Martinsburg WV | Registered: April 02, 2011Reply With QuoteReport This Post
I made it so far,
now I'll go for more
Picture of rbert0005
posted Hide Post
Have you checked with the maker?

Bob


I am no expert, but think I am sometimes.
 
Posts: 4578 | Location: South Carolina | Registered: January 23, 2004Reply With QuoteReport This Post
אַרְיֵה
Picture of V-Tail
posted Hide Post
quote:
Originally posted by rbert0005:

Have you checked with the maker?
Shouldn't be difficult, OP does speak Chinese. But the phone call would probably cost more than 41's suggestion of buying a new lid.



הרחפת שלי מלאה בצלופחים
 
Posts: 30545 | Location: Central Florida, Orlando area | Registered: January 03, 2010Reply With QuoteReport This Post
I made it so far,
now I'll go for more
Picture of rbert0005
posted Hide Post
Smile I get that

Bob


I am no expert, but think I am sometimes.
 
Posts: 4578 | Location: South Carolina | Registered: January 23, 2004Reply With QuoteReport This Post
I Am The Walrus
posted Hide Post
quote:
Originally posted by 41:
That's too big. They don't seem to make the smaller gasket so just buy a new top.

https://www.walmart.com/ip/Oza...cement-Lid/914288314


Doesn't appear available. No option to add it to the cart.


_____________

 
Posts: 13047 | Registered: March 12, 2005Reply With QuoteReport This Post
אַרְיֵה
Picture of V-Tail
posted Hide Post
quote:
Originally posted by Edmond:
quote:
Originally posted by 41:
That's too big. They don't seem to make the smaller gasket so just buy a new top.

https://www.walmart.com/ip/Oza...cement-Lid/914288314
Doesn't appear available. No option to add it to the cart.
What's the diameter? Will this work?



הרחפת שלי מלאה בצלופחים
 
Posts: 30545 | Location: Central Florida, Orlando area | Registered: January 03, 2010Reply With QuoteReport This Post
Only the strong survive
Picture of 41
posted Hide Post
I bought my 64 oz bottle about six years ago. I measured the neck and it is 2.390 inches. You could use an o-ring but it should be food grade.


41
 
Posts: 11828 | Location: Herndon, VA | Registered: June 11, 2009Reply With QuoteReport This Post
Only the strong survive
Picture of 41
posted Hide Post
Looks like the Yeti bottles use the same size cap:

https://www.amazon.com/YETI-Ra...ODQifQ%3D%3D&sr=8-60


41
 
Posts: 11828 | Location: Herndon, VA | Registered: June 11, 2009Reply With QuoteReport This Post
אַרְיֵה
Picture of V-Tail
posted Hide Post
quote:
Originally posted by 41:

Looks like the Yeti bottles use the same size cap:

https://www.amazon.com/YETI-Ra...ODQifQ%3D%3D&sr=8-60
I would have thought so, but scrolling down to the Questions section on th page that you linked to, I found this:
quote:
"I actually own a Ozark 64oz. The mouth of the Ozark 64 is too narrow and the chug cap won’t fit."



הרחפת שלי מלאה בצלופחים
 
Posts: 30545 | Location: Central Florida, Orlando area | Registered: January 03, 2010Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    Replacement lids for 32oz & 64 oz insulated containers

© SIGforum 2024