I have these and they've seen a good amount of use. The gaskets on the inside have started to deform from years of use and therefore aren't sealing.

https://www.walmart.com/ip/Oza...-Mouth-Lid/131683847

What alternatives do I have to replacing these? Walmart doesn't sell the lid/gasket. Looked in store and online.

Depending on the design of the sealing surface you might find an O-ring at a good hardware store or plumbing supply that will work.

It is a flat gasket and you could get one of these which bigger and cut it down.


https://www.walmart.com/ip/2-P...Straw-Bran/494372126

That's too big. They don't seem to make the smaller gasket so just buy a new top.

https://www.walmart.com/ip/Oza...cement-Lid/914288314

quote:

Originally posted by 41:
That's too big. They don't seem to make the smaller gasket so just buy a new top.

https://www.walmart.com/ip/Oza...cement-Lid/914288314

This. If you really like the bottle, and cannot source a generic replacement, this is your best bet.

Have you checked with the maker?

Bob

quote:

Originally posted by rbert0005:

Have you checked with the maker?

Shouldn't be difficult, OP does speak Chinese. But the phone call would probably cost more than 41's suggestion of buying a new lid.

I get that

Bob

quote:

Originally posted by 41:
That's too big. They don't seem to make the smaller gasket so just buy a new top.

https://www.walmart.com/ip/Oza...cement-Lid/914288314

Doesn't appear available. No option to add it to the cart.

quote:

Originally posted by Edmond:

quote:

Originally posted by 41:
That's too big. They don't seem to make the smaller gasket so just buy a new top.

https://www.walmart.com/ip/Oza...cement-Lid/914288314

Doesn't appear available. No option to add it to the cart.

What's the diameter? Will this work?

I bought my 64 oz bottle about six years ago. I measured the neck and it is 2.390 inches. You could use an o-ring but it should be food grade.

Looks like the Yeti bottles use the same size cap:

https://www.amazon.com/YETI-Ra...ODQifQ%3D%3D&sr=8-60

quote:

Originally posted by 41:

Looks like the Yeti bottles use the same size cap:

https://www.amazon.com/YETI-Ra...ODQifQ%3D%3D&sr=8-60

I would have thought so, but scrolling down to the Questions section on th page that you linked to, I found this:

quote:

"I actually own a Ozark 64oz. The mouth of the Ozark 64 is too narrow and the chug cap won’t fit."