SIGforum
Another HVAC question regarding air filters

This topic can be found at:
https://sigforum.com/eve/forums/a/tpc/f/320601935/m/1600019794

January 16, 2023, 12:39 PM
6guns
Another HVAC question regarding air filters
I have an odd sized filter in my unit; 16 3/8 x 21 1/2. I can find them online, but only in MERV 8 or higher.

Any suggestions where I can find these with an easier air flow? Thanks.




SIGforum: For all your needs!
Imagine our influence if every gun owner in America was an NRA member! Click the box>>>
January 16, 2023, 12:40 PM
Warhorse
I've never seen that size air filter.


____________________________
NRA Life Member, Annual Member GOA, MGO Annual Member
January 16, 2023, 12:43 PM
ZSMICHAEL
I had the same problem. I had them specially made for awhile then stopped because of the cost. I am assuming the filter is for the return??? If so enlarge the size of the opening. Worked for me.
January 16, 2023, 12:52 PM
6guns
I'd never seen that size before either. Why???

https://www.amazon.com/Aerosta...id=1673734752&sr=8-5

I can get these....and probably will, but I was hoping to get less restrictive filters.




SIGforum: For all your needs!
Imagine our influence if every gun owner in America was an NRA member! Click the box>>>
January 16, 2023, 12:53 PM
Mustang-PaPa
Could you not build an adapter frame or semi frame to get you to a std size filter.

A little effort might make filter finding easier.
January 16, 2023, 12:54 PM
ZSMICHAEL
Blame the contractor.
January 16, 2023, 12:56 PM
ZSMICHAEL
Before I changed the size of the opening I had one specially made. Got tired of cleaning it.
January 16, 2023, 12:58 PM
6guns
quote:
Originally posted by Mustang-PaPa:
Could you not build an adapter frame or semi frame to get you to a std size filter.

A little effort might make filter finding easier.


Perhaps with some sheet metal frigging around, but I'd rather not have to do that. Amazon has a bunch of choices in this size, I was surprised. Just none that are less than MERV 8. Hardware and big box stores never heard of this size.




SIGforum: For all your needs!
Imagine our influence if every gun owner in America was an NRA member! Click the box>>>
January 16, 2023, 01:00 PM
4MUL8R
is this a return duct in a wall?

it is likely possible to take out the odd size and replace it with a standard size. a little bigger wont hurt the airflow. the duct itself is the choke.


-------
Trying to simplify my life...
January 16, 2023, 01:01 PM
6guns
This filter is in the furnace.




SIGforum: For all your needs!
Imagine our influence if every gun owner in America was an NRA member! Click the box>>>
January 16, 2023, 01:14 PM
HRK
Carrier is that way, wanting you to buy from them, ours isn't standard but found it on Amazon, reminds me, it's time to change the filter....
January 16, 2023, 02:06 PM
jimmy123x
https://pureairfiltersdirect.com/

These people are great to deal with (local to me). The blue/white filter is Merv 6 and the orange ia Merv 7 I believe.
January 16, 2023, 03:02 PM
6guns
Thanks for the link, jimmy.




SIGforum: For all your needs!
Imagine our influence if every gun owner in America was an NRA member! Click the box>>>
January 16, 2023, 11:38 PM
Excam_Man
Depending on the air handler position and install, a Honeywell 16x20 media cabinet might be a simple install.

I can get you the fiberglass filters, but they are not cheap. 16.50 each, 12 per box - plus shipping.

Unless you have some major restrictions with the install, I'd highly recommend the media filter upgrade.




January 17, 2023, 01:16 AM
Schmelby
I got a new Carrier system. Filter size is 21 1/2 by 16 1/2
The only place I could find them was Amazon. Merv 11.
January 17, 2023, 10:15 AM
6guns
Thanks for the additional thoughts.

I ended up ordering a six pack of MERV 8's from Amazon. As you, Excam_Man, has suggested in the past, I wanted a less "efficient" filter, but I'll plan to replace these a bit more often.




SIGforum: For all your needs!
Imagine our influence if every gun owner in America was an NRA member! Click the box>>>
January 17, 2023, 10:29 AM
chellim1
MERV 8 should be fine.

I use this one:
Trion Air Bear 255649-102 (3 Pack) - Pleated Air Filter 20"x25"x5" MERV 8
SKU: TRION255649-102-3

https://www.discountfurnacefilter.com/

Thanks for the reminder, it's time to change the filter....



"Some things are apparent. Where government moves in, community retreats, civil society disintegrates and our ability to control our own destiny atrophies. The result is: families under siege; war in the streets; unapologetic expropriation of property; the precipitous decline of the rule of law; the rapid rise of corruption; the loss of civility and the triumph of deceit. The result is a debased, debauched culture which finds moral depravity entertaining and virtue contemptible."
-- Justice Janice Rogers Brown

"The United States government is the largest criminal enterprise on earth."
-rduckwor
January 17, 2023, 10:55 AM
Calif Phil
K&N the automotive filter company makes high flow
HVAC filters, I checked and the closest size to your filter is a 16x20. They did have my shop filter size of 16x25 $31.99 and free shipping. Decided to order it and give it a try.
January 17, 2023, 02:39 PM
sean7
https://filterbuy.com/air-filters/16-38x21-5x1/