SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    New Sig Owner!
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
New Sig Owner! Login/Join 
Member
posted
I’ve just joined this forum. I’ve been wanting a Sig P226 for years and years, and I finally got one. I’m a cop and have been shooting a glock for 9 years, but just qualified with my Sig. I am looking for some cleaning pointers and just wanted to post in the forum. I am using Mpro7 cleaner and Mpro7 grease for the rails, greasing it according to the grayguns article, but thinking about switching to Break Free CLP. I am also using the Lucas oil for the barrel and guide rod. Everyone tells me Sigs rust if you don’t properly care for them. I absolutely love this gun! It has been a long time coming and this is my duty firearm until retirement. Any suggestions for Sigs such as cleaning and care or anything else will be greatly appreciated. Thanks!
 
Posts: 11 | Registered: February 05, 2018Reply With QuoteReport This Post
Member
posted Hide Post
Welcome aboard! And any good quality lube or grease will keep your Sig running fine for years.
Example:
Yesterday I bought a 1988 W German made 226 with the original zipperback magazines. It is rust free. After 30 years.


End of Earth: 2 Miles
Upper Peninsula: 4 Miles
 
Posts: 16563 | Location: Marquette MI | Registered: July 08, 2014Reply With QuoteReport This Post
Frangas non Flectes
Picture of P220 Smudge
posted Hide Post
Congrats, and welcome!

Give this thread a look:
https://sigforum.com/eve/forums...30601935/m/908103701

More detail here:
http://www.apextactical.com/bl...nternal-lubrication/


______________________________________________
“There are plenty of good reasons for fighting, but no good reason ever to hate without reservation, to imagine that God Almighty Himself hates with you, too.”
 
Posts: 17887 | Location: Sonoran Desert | Registered: February 10, 2011Reply With QuoteReport This Post
Take the risk or
lose the chance
posted Hide Post
I'm certainly no expert. That said, I use Mpro-7 to clean my Sigs, Break Free CLP to lube them & Wilsons Ultima-Lube grease on the rails. (Sigs like to be run wet.) This has been my formula for more years than I'd care to admit and seems to be very effective.

Welcome to the forum....it's quite different from all other firearms-related forums: great folks, plenty of knowledge and good manners!


----------------------------------------
“The further a society drifts from truth, the more it will hate those who speak it.”
 
Posts: 1475 | Location: RR12 | Registered: February 17, 2008Reply With QuoteReport This Post
The Velvet Voicebox
posted Hide Post
How do you feel about overtime? Reason being as most of us on Sigforum are well aware of, you will not want to stop at just one. And that doesn't include the rifles. Big Grin



"All great things are simple, and many can be expressed in single words: freedom, justice, honor, duty, mercy, hope."

--Sir Winston Churchill

"The world is filled with violence. Because criminals carry guns, we decent law-abiding citizens should also have guns. Otherwise they will win and the decent people will lose."

--James Earl Jones



 
Posts: 7674 | Location: KCMO | Registered: August 31, 2002Reply With QuoteReport This Post
Member
posted Hide Post
Congrats & welcome!


Like guns, Love Sigs
 
Posts: 1227 | Location: Battle Born | Registered: December 26, 2009Reply With QuoteReport This Post
Gracie Allen is my
personal savior!
posted Hide Post
Welcome. MPro7/RIG +P with a drop of oil on the back of the extractor in CenTex. The Gumsmithing Insitute video isn't bad when it comes to walking you through complete dis- and reassembly, but the OpSec video is, I think, better.
 
Posts: 27313 | Location: Deep in the heart of the brush country, and closing on that #&*%!?! roadrunner. Really. | Registered: February 05, 2008Reply With QuoteReport This Post
Drill Here, Drill Now
Picture of tatortodd
posted Hide Post
I've been a Sig owner for about a dozen years now (first one was a P229).

At the time, Eezox was the CLP winning all of the head to head rust prevention tests. I clean everything with Eezox; let it dry; then lube the barrel, frame rails, and slide rails with Brian Enos' Slide Glide Lite; and reassemble.

I have a Gray Guns P-series competition package on one gun and the only difference is that if it's above 60F then I use regular slide glide.

There are much newer products than Eezox or Slide Glide, but they've worked great for me for 12 years so if it ain't broke to fix it.



Ego is the anesthesia that deadens the pain of stupidity

DISCLAIMER: These are the author's own personal views and do not represent the views of the author's employer.
 
Posts: 23956 | Location: Northern Suburbs of Houston | Registered: November 14, 2005Reply With QuoteReport This Post
Oriental Redneck
Picture of 12131
posted Hide Post
Welcome to SF.
Sounds like you're an Aggie class of 2007?
Stick around. There are a bunch of your LEO brothers on here.


Q






 
Posts: 28224 | Location: TEXAS | Registered: September 04, 2008Reply With QuoteReport This Post
Member
posted Hide Post
Congrats on the purchase and welcome aboard. I have plenty of pistols to take to the range but I always gravitate to my P226. Something about it that just makes me love it. There are plenty of videos on youtube explaining how to disassemble and clean your new pistol. They are very easy to work on.
 
Posts: 7783 | Registered: October 31, 2008Reply With QuoteReport This Post
Member
Picture of 45_Auto
posted Hide Post
Welcome to the Forum! You made a fine choice with the 226, as others have said keeping SIGS lubed you shouldn't have any issues whatsoever, they are very simple to take down.

Stay safe out on the streets.


_____________________________________________________________________________________________________________________
A Veteran is someone who wrote a blank check Made payable to 'The United States of America' for an amount of 'Up to and including their life'.
That is Honor. Unfortunately there are way too many people in this Country who no longer understand that.
 
Posts: 2306 | Location: New Hampshire | Registered: November 29, 2008Reply With QuoteReport This Post
Husband, Father, Aggie,
all around good guy!
Picture of HK Ag
posted Hide Post
Howdy Ag,

Great choice in the P226.

Glad you joined, lots of good folks here.

As was mentioned you will likely not stop with one Sig.


HK Ag
 
Posts: 3556 | Location: Tomball, Texas | Registered: August 09, 2005Reply With QuoteReport This Post
Member
posted Hide Post
Thank for all the information and Gig em to the Aggies.
 
Posts: 11 | Registered: February 05, 2018Reply With QuoteReport This Post
Member
Picture of 10-7 leo
posted Hide Post
Grease on the rails, thinner products like oil will run off and your rails will be dry in a very short time.

Don't forget about your spare mags. They will rust up on you. I applied car paste wax after cleaning and dry them off. Never had to worry about rust again.

Welcome aboard and stay safe!



Sic Semper Tyrannis
If you beat your swords into plowshares, you will become farmers for those who didn't!
Political Correctness is fascism pretending to be Manners-George Carlin
 
Posts: 2043 | Location: Central FL | Registered: September 03, 2008Reply With QuoteReport This Post
My dog crosses the line
Picture of Jeff Yarchin
posted Hide Post
quote:
Originally posted by tatortodd:
I've been a Sig owner for about a dozen years now (first one was a P229).

At the time, Eezox was the CLP winning all of the head to head rust prevention tests. I clean everything with Eezox; let it dry; then lube the barrel, frame rails, and slide rails with Brian Enos' Slide Glide Lite; and reassemble.

I have a Gray Guns P-series competition package on one gun and the only difference is that if it's above 60F then I use regular slide glide.

There are much newer products than Eezox or Slide Glide, but they've worked great for me for 12 years so if it ain't broke to fix it.


This is the combo that I have always used with good results.
 
Posts: 12950 | Registered: June 20, 2007Reply With QuoteReport This Post
THE SIGGUY
Picture of SIGGUY (THE 1ST)
posted Hide Post
Key statement made earlier. Run SIGs wet. rails and barrel/guide. The best!


-------------------------------------------------------2/28/2015 ~ Rest in peace Dad. Lt Commander E.G.E. USN Love you.
 
Posts: 5310 | Location: Great State of NH | Registered: January 29, 2004Reply With QuoteReport This Post
Member
Picture of TigerDore
posted Hide Post
Welcome to the forum and welcome to the Sig gun addiction!
 
Posts: 9125 | Registered: September 26, 2013Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by 10-7 leo:
Grease on the rails, thinner products like oil will run off and your rails will be dry in a very short time.

Don't forget about your spare mags. They will rust up on you. I applied car paste wax after cleaning and dry them off. Never had to worry about rust again.

Welcome aboard and stay safe!


I was going to ask about magazine care too. Thank you. What about dry firing them? Cleaned it last night, and I left it "wet". I had to wipe off a lot of access grease. Looks like there is some Mpro 7 coming out the trigger, but after a few trigger pulls and working the action, it seams to have gone away.
 
Posts: 11 | Registered: February 05, 2018Reply With QuoteReport This Post
Member
Picture of SIG 229R
posted Hide Post
As a couple of folks have already stted Sigs like WET.
Congrats. on your first and also as others have said it probably within all likelyhood will not be your last.


SigP229R
Harry Callahan "A man has got to know his limitations".
Teddy Roosevelt "Talk soft carry a big stick"
I Cor10: 13 "1611KJV"
 
Posts: 6066 | Registered: March 04, 2007Reply With QuoteReport This Post
Member
Picture of 10-7 leo
posted Hide Post
quote:
Originally posted by TxAg2007:
I was going to ask about magazine care too. Thank you. What about dry firing them? Cleaned it last night, and I left it "wet". I had to wipe off a lot of access grease. Looks like there is some Mpro 7 coming out the trigger, but after a few trigger pulls and working the action, it seams to have gone away.


Wipe off the excess grease and it will be fine. Check the areas where you used thinner lubricants occasionally between cleanings. If you find they are "drying out", use a very light coat of grease instead.

Dry firing won't be an issue, just remember dry firing will count toward your total round count as far as hammer spring, trigger bar spring, firing pin spring, spring for the firing pin block, etc. But you won't have to worry about replacing those for some time.

Another note on the mags, still check them from time to time. I reapplied the wax a few times a year.



Sic Semper Tyrannis
If you beat your swords into plowshares, you will become farmers for those who didn't!
Political Correctness is fascism pretending to be Manners-George Carlin
 
Posts: 2043 | Location: Central FL | Registered: September 03, 2008Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Lounge    New Sig Owner!

© SIGforum 2024