July 07, 2024, 04:49 PM
cyberphobiaSIGARMS Eazypower USA screwdriver style Sig Tool uses.
I have had my SIGARMS easypower Sig tool for ever; it has 4 different tips.
I know what two of the tips are for..screwdriver bit, sear spring tip; but not the other two tips.
Anyone tell me the use of the other two bits/tools.
Thank you.
July 10, 2024, 12:53 PM
p220copThe small point is for removing the mag catch. The notched end is to push the sear spring down under its peg.
July 10, 2024, 04:01 PM
cyberphobiathanks thats 3, I know the sear spring and the grip screws did not know the MAG Catch but there is another end with a large cut out on the other end of the grip screw end I will have to take a photo and try to attach.
What is this end for on the SIGARMS tool?
SIGARMS unknown tool bit by
Scopophobia, on Flickr
July 10, 2024, 05:37 PM
sigfreundAlthough I never found it particularly useful, that tip was evidently to manipulate the earlier metal mainspring seat to allow removing the pin used in that system. (It’s been so long since I worked on mainsprings like that that things are a little vague at this point.)