Tried to search thru SF on this topic, wasn’t sure if this was posted anywhere. Got a Dillon 650, have been hearing that some people have installed a camera/monitor to visually check the case for powder. Has anybody here used something like this? I don’t want to use the powder check system Dillon has, would like to see it on a screen as I’m loading if that makes sense.

Appreciate info and correction if needed of what I’m asking, lol. Thanks in advance!

UODATE: just installed a Teslong endoscope, easy job. Monitor shows the case very well, thanks to Riley for his info!

This message has been edited. Last edited by: m1009,

Don't know anyone who's used a camera, but I do know quite a few who've mounted a mirror at the correct angle to see into the case to check powder levels.

They all installed a LED light system to shine into the case also.

Thanks Flash-LB, a mirror with an led light pointed correctly might work…
Will have to check and see how it might be done.

I use a Teslong endoscope to check the powder. $60 or so online.

Works great.

Thanks, Riley, ( edited my reply). Think I found one that will work. Appreciate the info, looks like decent size screen and easy install.

https://teslong.com/products/m...campaign=sag_organic

Pretty sure I found it for $60 last year or so.

Riley, thanks again. Found one on Amazon for $70, put it on wishlist to review before I buy. Thanks for the link too, in case that one is more of what we want.

I also highly recommend the InLine Fabrication LED light kit.

https://inlinefabrication.com/...t-for-the-dillon-650

Thanks again, Riley. Nice. I do like InLine stuff. Will check that out too. Appreciate the tip.

Woohoo! Glad it works well for you!