Go | New | Find | Notify | Tools | Reply |
Member |
Hey I got a keg of Accurate Arms #9, and a bunch of Montana Gold 125's. Anybody have a good recipe for the 357sig, that you would care to share? | ||
|
Member |
| |||
|
Member |
Thank you Jackimoe. 12.0 - 12.03 looks like a good start point since 13 is the max.(per Lymans 49th) I'll have to put some together. | |||
|
Spread the Disease |
I used to use 12.0gr with that combination. Now all I use is AA#7. ________________________________________ -- Fear is the mind-killer. Fear is the little-death that brings total obliteration. I will face my fear. I will permit it to pass over me and through me. And when it has gone past me I will turn the inner eye to see its path. Where the fear has gone there will be nothing. Only I will remain. -- | |||
|
Member |
I just got back from the range. I loaded some up with 12.3 grains. I was shooting my 229 Legion. Man what a sweet load. I was at a indoor range so I did not take my LABRADAR. But from the books, it should be around 1225-1250 fps. Thanks for all the input on this load. I REALLY APPRECIATE IT! Just for giggles I loaded some 9mm with the 125 Montana Gold sig bullets. Very accurate. | |||
|
Member |
With AA#9 & MG 125gr, my working load is 13gr. It is not max but well up the ladder. IF YOU AREN'T HANDLOADING, YOU AREN'T SHOOTING ENOUGH! NRA Instruc: Basic Pistol & Met Reloading | |||
|
Member |
| |||
|
Member |
Good combo to use. I switched to AAC #7 and been having good luck with that. Now my AAC#9 is reserved for M1 Carbine loads. It shoots 110grain bullets very very well. | |||
|
Member |
I've got AA #5, 7 and 9 now. I've been loading 147 with the #9 but wont get a chance to chrono for a few weeks. I changed over to all Dillon dies to help eliminate the issues I was having with the Lee and RCBS dies. Been flawless so far. Going to pick up some more 124/125 bullets tomorrow. | |||
|
The Constable |
I have loaded 12.8 grs with the MT Gold 125's for years. | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |