SIGforum
Trimming pistol brass (Yeah yeah, just read before commenting)
January 19, 2025, 06:13 PM
400mTrimming pistol brass (Yeah yeah, just read before commenting)
I really don’t want to hear the “I’ve never trimmed pistol brass” comments but I do have a question. After reading several topics about trimming .357 cases, quite a few people are talking about trimming after they resize and flare the cases. After resizing I understand but after flaring seems wrong. Wouldn’t that normally be done before flaring if it’s done at all? I can’t think of a good reason to flare first.
January 19, 2025, 09:43 PM
AZSigsIf I were to trim pistol brass, it would be after decapping and sizing the brass.
Getting shot is no achievement. Hitting your enemy is. NRA Endowment Member . NRA instructor January 19, 2025, 11:52 PM
Steve in PANever in 30+ years of reloading, but to answer the question, any trimming should be done after resizing and before flaring.
Steve
"The Marines I have seen around the world have, the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps." Eleanor Roosevelt, 1945
January 20, 2025, 06:00 AM
sourdough44As posted above.
A while back I couldn’t find any 41 mag brass, but I could get brand new 414 mag Starline brass. It’s pretty much the same, about 1/4” longer.
I set up to trim back to regular 41 mag length, took a while, but worked fine. I left a few a little long, for snake-shot loads.
January 20, 2025, 08:34 PM
sig operatorI am in the trim before flare camp. Flaring first could be inconsistent due to different case lengths. Then you would remove different amounts of flare based on case lengths before trim.
January 21, 2025, 09:49 AM
BrBaResize, trim, and then neck size works well for me. As long as the cases get trimmed the same length, that's all that matters. I trim to 1.280" because the cannelure on one of the bullets I load will make the loaded cartridge longer than 1.590" if the brass is any longer than 1.280".
March 20, 2025, 09:30 PM
MikeinNCWhen I reloaded 357SIG I
Deprimed
Cleaned
Sized
Trimmed
Primed
Expanded
Powder
Seating/crimping
I quit reloading for the caliber and bought a 40 barrel for my duty gun and just shoot 40
"Violence, naked force, has settled more issues in history than has any other factor.” Robert A. Heinlein
“You may beat me, but you will never win.” sigmonkey-2020
“A single round of buckshot to the torso almost always results in an immediate change of behavior.” Chris Baker March 24, 2025, 09:11 AM
Lawman052To go a step further from above post, if you trim after flaring the mouth and then get inconsistent amount of flaring, you will also get an inconsistent amount of crimp thereby having a detrimental effect on accuracy.
March 24, 2025, 10:29 AM
sig operatorGood point Lawman052, and welcome to the SIGforum.
March 25, 2025, 10:52 AM
sigcrazy7quote:
Originally posted by Lawman052:
To go a step further from above post, if you trim after flaring the mouth and then get inconsistent amount of flaring, you will also get an inconsistent amount of crimp thereby having a detrimental effect on accuracy.
^^^ This right here. There’s no circumstance where trimming after flaring would be appropriate.
Demand not that events should happen as you wish; but wish them to happen as they do happen, and you will go on well. -Epictetus March 25, 2025, 10:59 AM
Lawman052Thanks Operator. Moving into pistol competition from LR rifle competition so I have alot of hand loading experience for accuracy. That 5 inch bullseye @1000 is small lol