SIGforum.com    Main Page  Hop To Forum Categories  Reloading    Suitable powders for 6BR and similar long range calibers?
Go
New
Find
Notify
Tools
Reply
  
Suitable powders for 6BR and similar long range calibers? Login/Join 
Inject yourself!
posted
Since the best or favorites might not be available, looking at something that would be safe to buy 8 to 16lbs of.

From high level searching I see some good choices but they are also the most popular and thus almost unobtanium at less than $50/lb. Is there anything else that stands a good chance of working well?

I’m not set on the 6BR at this point but most calibers close use the same powders as optimal.

Should I just wait until one of these shows up? It will be a while before I’ve got all the pieces together.

Varget
IMR 8028 XBR
VV N140
H4895




Looking for an Alaskan Malamute? Look here: http://www.moonsongmals.org
Do not send me to a heaven where there are no dogs.
Step Up or Stand Aside: Support the Troops !
 
Posts: 7969 | Location: West | Registered: November 26, 2002Reply With QuoteReport This Post
Member
Picture of sourdough44
posted Hide Post
https://www.6mmbr.com/6mmbr.html

I think that linked site has more info than any of us could type here. I’ve not loaded for the round, seems to favor medium speed rifle powders.

To the other question, one would have to start with what one normally shoots & round counts. I’m much more into the medium to faster rifle powder areas, 223, 308, straight wall rifle, 243, & similar. I can always find a use for a 4895,;TAC, 8208, & Varget.

Then we get to what’s available, at a somewhat reasonable price. In the last 18 months or so I bought, 8208, H-322, AA1680, IMR-4198, & HP-38, & some IMR-4320. Just about all was at regular shops, reasonable prices. I see powder at gun shows, $50 or more a pound.

With the right powder, no problem buying an 8 lb jug.
 
Posts: 5385 | Location: WI | Registered: February 29, 2012Reply With QuoteReport This Post
Caught in a loop
posted Hide Post
IMR 4166 is slightly less temp stable than Varget but aside from that it's almost identical in terms of burn rate and charge weight. Might open up an avenue or 2. It's my preferred powder for 308.

VV N140 is also pretty close to Varget as well.

No idea if it'll work well for the cartridge, but I've had excellent luck with IMR 4451 in 6.5 Creedmoor.


"In order to understand recursion, you must first learn the principle of recursion."
 
Posts: 3031 | Location: Memphis, TN | Registered: August 23, 2010Reply With QuoteReport This Post
Member
posted Hide Post
Shot all four powders in a 6BR as well as a 223. Shoots great in both calibers. If I were in your shoes, would wait for one of the four.

Awhile back bought some V140 here, https://www.whiddengunworks.com/powder/ sign up for email notification.
 
Posts: 3197 | Location: 9860 ft above sea level Colorado | Registered: December 31, 2008Reply With QuoteReport This Post
Member
Picture of Haveme1or2
posted Hide Post
6bra powders
Varget, R15, N203B, H4895Â,
N540
CFE223 32gr start.
N-150. Imr 8208
reloader ARcomp.
30.6-31.4 gr of N140 

My list so far.
I got 8lbs cfe223 going this year.
103 Roy Hunter & barts hammers
 
Posts: 1000 | Location: Mint Hill NC | Registered: November 26, 2016Reply With QuoteReport This Post
Member
Picture of p08
posted Hide Post
When I had a rifle in 6 Norma BR I loaded 105gr Scenars with N140. My best group @ 268 yards was just under 1/4"


-------------------------------------
Always the pall bearer, never the corpse.
 
Posts: 700 | Location: Illinois | Registered: December 03, 2002Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  Reloading    Suitable powders for 6BR and similar long range calibers?

© SIGforum 2022