SIGforum.com    Main Page  Hop To Forum Categories  CCW Methods & Issues    Car holster (NOT Concealed Carry)
Go
New
Find
Notify
Tools
Reply
  
Car holster (NOT Concealed Carry) Login/Join 
Member
posted
All,
I am looking for a specific car holster that I could install on the panel near the gearbox handle (i.e. right hand)
or possibly a regular (left hand?) holster that I could adapt to the same panel ?
For a P320 RX.
Thanks a lot !
 
Posts: 20 | Registered: November 25, 2019Reply With QuoteReport This Post
Shall Not Be Infringed
Picture of nhracecraft
posted Hide Post
Just about any Safariland Holster that can be mounted using the QLS System can be adapted to mount in a vehicle. Similarly, any G-Code Holster that can be mounted using their RTI System can be adapted to mount in a vehicle as well. A 'really nice' feature of both of those systems is that the holster can be removed from the vehicle and attached to a belt set up with that mounting system.

Level II retention holsters that are only equipped with Rotating Locking Hood, such as Safariland SLS and G-Code XST are particularly suited for such use.


____________________________________________________________

If Some is Good, and More is Better.....then Too Much, is Just Enough !!
Trump 2024....Save America!
"May Almighty God bless the United States of America" - parabellum 7/26/20
Live Free or Die!
 
Posts: 9013 | Location: New Hampshire | Registered: October 29, 2011Reply With QuoteReport This Post
The cake is a lie!
Picture of Nismo
posted Hide Post
I would think any left hand holster with a Tek-lok attachment will work, providing you may need to drill a couple holes to mount the Tek-Lok.
 
Posts: 7428 | Location: CA | Registered: April 08, 2004Reply With QuoteReport This Post
quarter MOA visionary
Picture of smschulz
posted Hide Post
A Remora Holster jammed between the seat and console works good if you have the accommodations.
 
Posts: 22974 | Location: Houston, TX | Registered: June 11, 2006Reply With QuoteReport This Post
Member
posted Hide Post
I saw a guy with Gootus gun magnet mounted in his truck and it seemed to work well. You can find them on ebay.
 
Posts: 937 | Location: WV | Registered: May 30, 2013Reply With QuoteReport This Post
Member
posted Hide Post
Also interested! Or a way to mount an existing holster
 
Posts: 8 | Registered: December 29, 2023Reply With QuoteReport This Post
Member
Picture of P250UA5
posted Hide Post
quote:
Originally posted by smschulz:
A Remora Holster jammed between the seat and console works good if you have the accommodations.


I used to do something similar to this when I had my Mercedes. My pocket holster for my P11 fit perfectly between the seat & center console.
I don't pocket carry much anymore since we went to more casual attire in the office & I can IWB EDC & mostly carry the 320 now.




The Enemy's gate is down.
 
Posts: 15446 | Location: Spring, TX | Registered: July 11, 2011Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  CCW Methods & Issues    Car holster (NOT Concealed Carry)

© SIGforum 2024