SIGforum
Threading belt thru pant loops and holster

This topic can be found at:
https://sigforum.com/eve/forums/a/tpc/f/830601935/m/1520085844

December 19, 2018, 07:46 PM
wxl
Threading belt thru pant loops and holster
quote:
Originally posted by birddog1:
I thread through the holster loop, through the belt loop then through the other holster loop. IMO it adds more stability.


Ditto, just wish more consistency in loop placement on my pants
January 13, 2019, 01:23 PM
Casebrius
quote:
Originally posted by YooperSigs:
Also check out Nexbelt. I have their ratcheting nylon gun belt and it is excellent. Double layer with a low profile buckle that will not touch your belly.

Thanks for removing a Sea-note from my wallet...


Illigitimus non tatum carborundum
"in god we trust, every one else keep your hands where i can see them"
January 13, 2019, 04:00 PM
YooperSigs
I feel your pain... I am looking at getting a Nexbelt dress belt.


End of Earth: 2 Miles
Upper Peninsula: 4 Miles
January 13, 2019, 04:27 PM
SigM4
How is the Nexbelt as far as rigidity? My normal belt is an Armour Belts 1.5" dress belt with the internal stiffener. Any idea how it compares?



Success always occurs in private, and failure in full view.

Complacency sucks…
January 13, 2019, 05:25 PM
Ryanp225
quote:
Originally posted by SigM4:
How is the Nexbelt as far as rigidity? My normal belt is an Armour Belts 1.5" dress belt with the internal stiffener. Any idea how it compares?

The Armour belt is several notches (all puns intended Wink ) above in both fit and function. That is not a knock against the other belt but a testament to Mike's product. Similar to a Galco holster compared to an Rgrizzle. Off the shelf vs custom hand crafted excellence.
January 13, 2019, 05:48 PM
SigM4
^^^Thanks, that’s about what I expected. After having Armour Belts I’ve been spoiled, tried a few of these newer belts and have been disappointed in each. Sounds like this would be more of the same.



Success always occurs in private, and failure in full view.

Complacency sucks…
January 14, 2019, 08:48 PM
YooperSigs
The Nexbelt I wear is the double layer heavy nylon model and it is plenty stout. Not internal stiffener belt stout, but enough for me.
The only question remains for me is will it lose its support over time? We shall see.


End of Earth: 2 Miles
Upper Peninsula: 4 Miles
January 16, 2019, 10:27 PM
sns3guppy
I wear a 511 nylon belt with nylon buckle. They make single thickness and double thickness belts. I went to the wider belts years ago and it made a world of difference in my back. It hurt a lot less. The belts work fine at airport security, no metal. They hold up forever.

I always use all the belt loops, for inside the waistband or out.
January 23, 2019, 01:57 PM
CQB60
This
quote:
Originally posted by birddog1:
I thread through the holster loop, through the belt loop then through the other holster loop. IMO it adds more stability.



______________________________________________
Life is short. It’s shorter with the wrong gun…
January 24, 2019, 07:22 AM
Chacam
quote:
Originally posted by YooperSigs:
Also check out Nexbelt. I have their ratcheting nylon gun belt and it is excellent. Double layer with a low profile buckle that will not touch your belly.


I am on m6 third nexbelt strap. They jus5 don’t last.
January 24, 2019, 02:26 PM
YooperSigs
^^^^^ Interesting! What has been the problem with yours, so I can watch for it with mine?


End of Earth: 2 Miles
Upper Peninsula: 4 Miles
February 09, 2019, 06:50 PM
Chacam
They are synthetic and star to tear
March 05, 2019, 12:22 AM
BlackAgnes
I have an outside thumb break holster and thread the belt over the outside of the holster. Seems to keep it closer into the body.


"Dead Midgets Handled With No Questions Asked"