Very neat episode. Never would've thought to 3d print solder to make your own PCBs.
The engineering that goes into this thing is as interesting as the total build itself.
Loved the hat tip to the TGUK trio in the 'credits'
The Enemy's gate is down.
November 13, 2024, 08:19 AM
KDR
The Tuned In podcast episode 114 is a two hour conversation with Richard Brunning. Really good discussion about his racing history and a lot of good info on Project Binky
____________________ I Like Guns and stuff
November 19, 2024, 11:51 AM
P250UA5
Howie Did It 35min breakdown on making their mill into a 3d solder printer
Edit: 13:30 on is just the full print run of the PCB.
The Enemy's gate is down.
April 28, 2025, 04:01 PM
vinnybass
The boys are threatening to post Episode 40 Tomorrow night.
"We're all travelers in this world. From the sweet grass to the packing house. Birth 'til death. We travel between the eternities."
April 29, 2025, 04:02 PM
vinnybass
"We're all travelers in this world. From the sweet grass to the packing house. Birth 'til death. We travel between the eternities."
April 29, 2025, 04:29 PM
P250UA5
Queued up to watch tomorrow. I know a lot of people are upset at how long this has taken, but they're being meticulous & doing it in their spare time, as they can. Richard apparently had a baby in the last year, so that takes up some of their available time as well.
Excited to see it still moving forward.
The Enemy's gate is down.
April 30, 2025, 06:35 AM
NapoleonSolo
I watched a ton of episodes and thought it was pretty cool what they are doing. But it is taking forever! Way cool though.
“Our actions may be impeded... But there can be no impeding our intentions or our dispositions. Because we can accommodate and adapt. The mind adapts and converts to its own purposes the obstacle to our acting.
The impeding to action advances action.
What stands in the way becomes the way.”
― Marcus Aurelius
April 30, 2025, 08:03 AM
P250UA5
A bit 'clickbaity' but gives some [unverified] background on some of the project & its delays.
The Enemy's gate is down.
April 30, 2025, 09:06 AM
P250UA5
Who knew 40 minutes of building dash gauges could be that entertaining.
The Enemy's gate is down.
May 04, 2025, 05:24 PM
motor59
The level of detail involved in building your own gauges for your dash, just so they'll be exactly what you want, is amazing. I cannot imagine having that amount of patience.
suaviter in modo, fortiter in re
July 31, 2025, 01:51 PM
Johnny 3eagles
Episode 41 dropped today. Still working on the dashboard.
Any dog can be a Guide Dog if you don't care where you're going.
NRA ENDOWMENT LIFE MEMBER
July 31, 2025, 02:28 PM
P250UA5
On my watchlist. I know it's taking forever, but love their videos.
The Enemy's gate is down.
July 31, 2025, 03:24 PM
PHPaul
Those guys are nucking futz! The detail just on the switch panel alone would have me in the looney bin.
Making their own circuit boards, Arduino everywhere, custom switches, 3D printed bracketry and housings...Jeebus.
Be careful when following the masses. Sometimes the M is silent.
July 31, 2025, 03:28 PM
P250UA5
Looking back on this thread, I started watching in Feb 2021. Watched 25 episodes in 3 days, and was 'caught up' in 5.
It's a treat when the new ones come out, but crazy that 4 years later it's still a long way from complete.
The Enemy's gate is down.
August 01, 2025, 06:53 AM
KDR
quote:
Originally posted by P250UA5: Looking back on this thread, I started watching in Feb 2021. Watched 25 episodes in 3 days, and was 'caught up' in 5.
It's a treat when the new ones come out, but crazy that 4 years later it's still a long way from complete.
Imagine what its like for us that started watching when the 3rd or 4th episode dropped.
____________________ I Like Guns and stuff
June 01, 2026, 09:22 AM
P250UA5
Binky's Back! A Howie Did It, but still always enjoy when there's something new here:
On my watchlist.