SIGforum
Stock Suggestions
February 24, 2017, 02:08 PM
PPGMDStock Suggestions
First let me preface this
NO MAGPULI need to replace my Magpul UBR, as it is missing screws and despite trying to work with Magpul they've done nothing but send me the wrong screws despite me showing them that their screws are too short for what is speced on the label.
So I am looking for a rock solid stock, that has a good cheek weld forward of the stock like the UBR. That means most adjustable stocks are out. Light weight would be a bonus.
And let me repeat NO MAGPUL.
-------
A turbo: Exhaust gasses go into the turbocharger and spin it, witchcraft happens, and you go faster.
Mr. Doom and Gloom
"King in the north!"
"Slow is smooth... and also slow.
February 24, 2017, 04:17 PM
SR025B5 Enhanced SOPMOD
February 24, 2017, 04:23 PM
KMitch200Let me know if you find an adjustable stock that is mustache friendly.
--------
After the game, the King and the pawn go into the same box.
February 24, 2017, 09:50 PM
ed308I've got a lot of different stocks. But my favorite is the Magpul STR (sorry). But also like my VLTOR EMOD just as much.
February 24, 2017, 10:42 PM
cjevans... I've been looking at Troy's Battle Ax CQB Stock - 7 ozs, storage capacity, QD swivel sockets.
We are all born ignorant, but one must work hard to remain stupid." ~ Benjamin Franklin.
"If anyone in this country doesn't minimise their tax, they want their head read, because as a government, you are not spending it that well, that we should be donating extra...:
Kerry Packer
SIGForum: the island of reality in an ocean of diarrhoea. February 25, 2017, 09:46 AM
GrumpyBikerVLTOR
U.S.M.C.
VFW-8054
III%
"Never let a Wishbone grow where a Backbone should be "
February 25, 2017, 11:53 AM
Texas Bob C.Colt SP1 or A1 stock.
February 26, 2017, 08:29 AM
smschulzIf I don't use a Magpul I use the Vltor or ACE.
February 26, 2017, 09:22 AM
exx1976Guessing you mean for an AR.
I have an LMT SOPMOD on my SBR and love it.
Only other one I have is the Magpul, and I've not had any problems with it. If I were you, I'd just return it to where you got it from and get a replacement that (hopefully) has the correct screws. They really are nice.
As for the VLTOR shown by grumpybiker, if you have any facial hair, don't do it. It gets caught in the stock and hurts like a biatch.
February 26, 2017, 11:41 AM
Chris17404You could go with the Vltor ARM Rifle Stock, in either A1 or A2 length:
https://www.vltor.com/shop/stocks/arm-rifle-stock/Chris
February 27, 2017, 02:18 AM
KMitch200quote:
As for the VLTOR shown by grumpybiker, if you have any facial hair, don't do it. It gets caught in the stock and hurts like a biatch.
Thanks!
That's one I can scratch off a search.
--------
After the game, the King and the pawn go into the same box.
February 27, 2017, 11:28 AM
samnevEither the Veltor of the LMT Sopmod. Of the 2 I'd go with the Veltor. It costs quite a bit less than the Sopmod iirc.
February 27, 2017, 12:55 PM
myrottietyquote:
Originally posted by SR025:
B5 Enhanced SOPMOD
+1 on this. I've got a B5 Enhanced SOPMOD on my SBR. It's solid.
Train how you intend to Fight
Remember - Training is not sparring. Sparring is not fighting. Fighting is not combat. February 27, 2017, 01:20 PM
RogueJSKCheck out the ACE skeleton stock
Rock solid - Check
Light weight - Check
Good cheek weld ahead of the typical adjustable stock area - Check
Not Magpul - Check
It uses the standard rifle-length buffer and tube.
Or, if you want even lighter, there's the ACE Ultralight (ARUL) stock.
February 27, 2017, 02:20 PM
cobrajetI recently put a Daniel's Defense stock on mine and I absolutely love it.
------------------------------------------------------------------------------------------------------------------
"The problem with our Liberal friends is not that they are ignorant, it's that they know so much that isn't so." Ronald Reagan
February 27, 2017, 03:21 PM
guardianangel762Why is the wiggle bad? I have never had it make the gun less accurate, when the gun is in my shoulder I don't feel wiggle.
___________________________________________________
But then of course I might be a 13 year old girl who reads alot of gun magazines, so feel free to disregard anything I post.
February 27, 2017, 03:44 PM
Replacement TommelLMT or B5 SOPMOD. I have both. The B5 version is cheaper.
-Tom
__________________________
"For the cause that lacks assistance/The wrong that needs resistance/For the Future in the distance/And the Good that I can do" - George Linnaeus Banks, "What I Live for"
March 02, 2017, 07:27 AM
exx1976If you've not yet found something, check out XLR. They make holt gun chassis, but the stocks attach to an A2 rifle buffer tube (not an adjustable tube). Since they are designed for bolt guns, they have all the adjustments you would ever want from cheek weld, etc.
March 03, 2017, 03:52 PM
RNshooterquote:
I'm guessing that thing works great, because it could not possibly be any uglier
Bruce
"The designer of the gun had clearly not been instructed to beat about the bush. 'Make it evil,' he'd been told. 'Make it totally clear that this gun has a right end and a wrong end. Make it totally clear to anyone standing at the wrong end that things are going badly for them. If that means sticking all sort of spikes and prongs and blackened bits all over it then so be it. This is not a gun for hanging over the fireplace or sticking in the umbrella stand, it is a gun for going out and making people miserable with." -Douglas Adams
“It is just as difficult and dangerous to try to free a people that wants to remain servile as it is to try to enslave a people that wants to remain free."
-Niccolo Machiavelli
The trouble with fighting for human freedom is that one spends most of one's time defending scoundrels. For it is against scoundrels that oppressive laws are first aimed, and oppression must be stopped at the beginning if it is to be stopped at all. -Mencken
