April 16, 2019, 03:48 PM
c1steveRecommendation for a RDS mount on a Mini-14.
I have been searching for a simple mount to attach a Trijicon MRO or similar RDS to a modern Mini-14. Any recommendations on this? Prefer to mount the RDS forward of the ejection port.
Most likely this will be a Picatiny rail, but a direct mount would be even better.
RogueJSK has a simple looking Pic rail mount about half way down this SF page, appears to be an Ultimak. What else is good?
https://sigforum.com/eve/forums...0601935/m/2640096454April 16, 2019, 07:37 PM
hrcjonultimak is your answer...
April 17, 2019, 10:56 AM
1KPerDayI tried this one with the dedicated micro Burris FF mount and it was ok but the mounting screws were buggered easily (steel screws into aluminum).
https://www.gggaz.com/ruger-mi...nts-and-mini-14.htmlI agree with the Ultimak recommendation for your stated preferences.
April 17, 2019, 11:43 AM
StramboI third the Ultimak recommendation. High quality and allows a co-witness of the irons.
I used one on an AK in Iraq as a contractor, so I certainly trust them. The AK was banged around in a vehicle a lot, no issues with the mount at all.
April 18, 2019, 10:14 AM
RogueJSKquote:
Originally posted by c1steve:
RogueJSK has a simple looking Pic rail mount about half way down this SF page, appears to be an Ultimak. What else is good?
https://sigforum.com/eve/forums...0601935/m/2640096454
Ultimak is definitely your best bet.
http://ultimak.com/m4.htmAmega also makes a similar setup, but it's not nearly as popular or proven as Ultimak.
http://www.amegamounts.com/pro...ages/rugerMini14.phpApril 18, 2019, 06:05 PM
c1steveThanks everyone. If RogueJSK affirms that Ultimak is the best choice, I know this advice is fully reliable.
April 19, 2019, 04:20 PM
SgtGoldquote:
Originally posted by RogueJSK:
quote:
Originally posted by c1steve:
RogueJSK has a simple looking Pic rail mount about half way down this SF page, appears to be an Ultimak. What else is good?
https://sigforum.com/eve/forums...0601935/m/2640096454
Ultimak is definitely your best bet.
http://ultimak.com/m4.htmAmega also makes a similar setup, but it's not nearly as popular or proven as Ultimak.
http://www.amegamounts.com/pro...ages/rugerMini14.php
Yea, don't know about that one. I have the Amega on a Mini and an Ultimak on an M1A. They both work. I mount the RDS as far forward on the Mini as it can go. It gives me a better field of view than mounting it back towards the receiver.