SIGforum.com    Main Page  Hop To Forum Categories  The Mason-Howe Rifle Room    FRT and wear concerns
Go
New
Find
Notify
Tools
Reply
  
FRT and wear concerns Login/Join 
You're going to feel
a little pressure...
posted
Hey all-

I am interested in having some fun with an FRT on a 10/22. I am sure that mag dumps will heat/wear/eat a barrel. Will it beat up any other parts of the gun?
My 10/22 is an old classic. I don't mind swapping in a new barrel as a "consumable" but I don't want to eat up the bolt and receiver, as well.

What say you? Put the original barrel on the shelf and send it or just buy a new rifle and keep the classic from getting smoked?

Bruc






"The designer of the gun had clearly not been instructed to beat about the bush. 'Make it evil,' he'd been told. 'Make it totally clear that this gun has a right end and a wrong end. Make it totally clear to anyone standing at the wrong end that things are going badly for them. If that means sticking all sort of spikes and prongs and blackened bits all over it then so be it. This is not a gun for hanging over the fireplace or sticking in the umbrella stand, it is a gun for going out and making people miserable with." -Douglas Adams

“It is just as difficult and dangerous to try to free a people that wants to remain servile as it is to try to enslave a people that wants to remain free."
-Niccolo Machiavelli

The trouble with fighting for human freedom is that one spends most of one's time defending scoundrels. For it is against scoundrels that oppressive laws are first aimed, and oppression must be stopped at the beginning if it is to be stopped at all. -Mencken
 
Posts: 4364 | Location: Sin City | Registered: October 06, 2011Reply With QuoteReport This Post
I have not yet begun
to procrastinate
posted Hide Post
There’s a couple of options to protect the receiver…

Kidd bolt buffer
Volquartzen bolt stop
Tandemkross shockblock bolt buffer


--------
After the game, the King and the pawn go into the same box.
 
Posts: 4593 | Location: Central AZ | Registered: October 26, 2006Reply With QuoteReport This Post
Raptorman
Picture of Mars_Attacks
posted Hide Post
You need this most of all. It's an internal anti-bounce dead blow bolt.

https://borebuddy.com/product/...22-anti-bounce-bolt/


____________________________

Eeewwww, don't touch it!
Here, poke at it with this stick.
 
Posts: 35663 | Location: North, GA | Registered: October 09, 2002Reply With QuoteReport This Post
You're going to feel
a little pressure...
posted Hide Post
quote:
Originally posted by Mars_Attacks:
You need this most of all. It's an internal anti-bounce dead blow bolt.

https://borebuddy.com/product/...22-anti-bounce-bolt/


I watched the video. I can't seem to find anything that says "you need this to correct X problem".

What will this make better?

Bruce






"The designer of the gun had clearly not been instructed to beat about the bush. 'Make it evil,' he'd been told. 'Make it totally clear that this gun has a right end and a wrong end. Make it totally clear to anyone standing at the wrong end that things are going badly for them. If that means sticking all sort of spikes and prongs and blackened bits all over it then so be it. This is not a gun for hanging over the fireplace or sticking in the umbrella stand, it is a gun for going out and making people miserable with." -Douglas Adams

“It is just as difficult and dangerous to try to free a people that wants to remain servile as it is to try to enslave a people that wants to remain free."
-Niccolo Machiavelli

The trouble with fighting for human freedom is that one spends most of one's time defending scoundrels. For it is against scoundrels that oppressive laws are first aimed, and oppression must be stopped at the beginning if it is to be stopped at all. -Mencken
 
Posts: 4364 | Location: Sin City | Registered: October 06, 2011Reply With QuoteReport This Post
Raptorman
Picture of Mars_Attacks
posted Hide Post
Bolt bounce leading to light primer strikes to no ignition or even worse an out of battery detonation.


____________________________

Eeewwww, don't touch it!
Here, poke at it with this stick.
 
Posts: 35663 | Location: North, GA | Registered: October 09, 2002Reply With QuoteReport This Post
Down the Rabbit Hole
Picture of Jupiter
posted Hide Post
As inexpensive as they are, I would buy another one just for the FRT. They look like a lot of fun.


Diligentia, Vis, Celeritas

"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
-- George Orwell

 
Posts: 5704 | Location: North Mississippi | Registered: August 09, 2002Reply With QuoteReport This Post
Stupid
Allergy
Picture of dry-fly
posted Hide Post
Which FRT are you using on the 10/22?


"Attack life, it's going to kill you anyway." Steve McQueen...
 
Posts: 7532 | Location: TEXAS | Registered: July 18, 2005Reply With QuoteReport This Post
Frangas non Flectes
Picture of P220 Smudge
posted Hide Post
quote:
Originally posted by RNshooter:
What say you? Put the original barrel on the shelf and send it or just buy a new rifle and keep the classic from getting smoked?


I would just buy or build one in whatever configuration you find interesting rather than trying to rework your classic. Buffers are cheap and that'll keep you from beating the receiver up, but you're going to spend for a barrel to keep from burning up the original, and probably a bolt and/or springs. At that point, you're just a receiver and trigger group away from a new gun anyways, so you may as well.

I actually just ordered a Mars 1022 FRT and it's going into a Brownell's receiver with a 5" heavy stainless threaded Pike Arms barrel. I built it purely as a suppressor host and figure an FRT is about right for it as well. Short little foldy boy setup with a can on it, may as well let it east as fast as it wants. Big Grin


______________________________________________
"If the truth shall kill them, let them die.”

"A man who does not read has no appreciable advantage over a man who cannot read."
 
Posts: 19363 | Location: Sonoran Desert | Registered: February 10, 2011Reply With QuoteReport This Post
You're going to feel
a little pressure...
posted Hide Post
Nevermind.
https://ag.nv.gov/News/PR/2025...n_Devices_in_Nevada/






"The designer of the gun had clearly not been instructed to beat about the bush. 'Make it evil,' he'd been told. 'Make it totally clear that this gun has a right end and a wrong end. Make it totally clear to anyone standing at the wrong end that things are going badly for them. If that means sticking all sort of spikes and prongs and blackened bits all over it then so be it. This is not a gun for hanging over the fireplace or sticking in the umbrella stand, it is a gun for going out and making people miserable with." -Douglas Adams

“It is just as difficult and dangerous to try to free a people that wants to remain servile as it is to try to enslave a people that wants to remain free."
-Niccolo Machiavelli

The trouble with fighting for human freedom is that one spends most of one's time defending scoundrels. For it is against scoundrels that oppressive laws are first aimed, and oppression must be stopped at the beginning if it is to be stopped at all. -Mencken
 
Posts: 4364 | Location: Sin City | Registered: October 06, 2011Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  The Mason-Howe Rifle Room    FRT and wear concerns

© SIGforum 2026