SIGforum.com    Main Page  Hop To Forum Categories  Mason's Rifle Room    S&W Response / Sig Mag
Go
New
Find
Notify
Tools
Reply
  
S&W Response / Sig Mag Login/Join 
Member
posted
S&W now offers a mag conversion for SIG 320 mags to fit the 9mm Response Carbine.
 
Posts: 66 | Registered: May 04, 2006Reply With QuoteReport This Post
I have lived the
greatest adventure
Picture of AUTiger89
posted Hide Post
Interesting! Thanks for the heads-up.




Phone's ringing, Dude.
 
Posts: 6178 | Location: Upstate SC | Registered: April 06, 2011Reply With QuoteReport This Post
That rug really tied
the room together.
Picture of bubbatime
posted Hide Post
Never saw that coming!

Wish Ruger would do the same thing for their PCC carbines.

Here is the magwell adapter.

https://www.smith-wesson.com/p...-sauer-p320-9mm-mags


______________________________________________________
Often times a very small man can cast a very large shadow
 
Posts: 6708 | Location: Floriduh | Registered: October 16, 2004Reply With QuoteReport This Post
Member
posted Hide Post
quote:
Originally posted by bubbatime:
Wish Ruger would do the same thing for their PCC carbines.


Any other adapter for Ruger (except ironically enough Springfield XD, Beretta APX, Arex Delta M, and other center-locking models) would require a re-design for the whole magwell. The reason is, a clever engineer at Ruger used the Glock magazine latch to be the gun's own latch. There's no way to activate other latch, at least not officially.

The existing aftermarket adapter for P320 and P365 activates off the inside of the release button. Which is not guaranteed to work with future models, makes installation harder, is not compatible with Backpacker or potentially with aftermarket buttons. It works, but only for aftermarket conditions. Ruger themselves will not copy that approach, I don't think.

P.S. Oh, man, you really got me thinking: What Would Ruger Do? Being the manufacturer of the gun, they have freedoms that the aftermarket does not. They could easily add an activation nub on the inside of the latch, for example. Or, make latches swappable, like in the Canadian CZ-75 adapter, and add a hollow on the inside of the chassis, so the Canadian technique would apply to something other than CZ-75 (the problem here is that the latch's shoe on other magazine types is outside of the existing cut-out in the magwell, so the Canadian design cannot be applied to P320 today). So yeah, on second thought I see some ways for them adding SIG magwells into a Gen 2 without re-designing the whole gun from scratch.
 
Posts: 8 | Registered: March 15, 2024Reply With QuoteReport This Post
Member
posted Hide Post
PSA; didn't see another thread mentioning it but are folks aware of the recall on the S&W Response carbines made prior to Feb. 12, 2024? Was thinking of getting one last week and learned of the recall. Some folks have had out of battery discharges.
 
Posts: 3464 | Location: Fairfax Co. VA | Registered: August 03, 2015Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  Mason's Rifle Room    S&W Response / Sig Mag

© SIGforum 2024