SIGforum.com    Main Page  Hop To Forum Categories  Mason's Rifle Room    New project: Ruger PPSh-41
Go
New
Find
Notify
Tools
Reply
  
New project: Ruger PPSh-41 Login/Join 
I'm not laughing
WITH you
Picture of Rolan_Kraps
posted
I just picked up a Midwest industries free float handguard for my Ruger PC9, 9mm. I noticed a passing resemblance to the Soviet PPSh-41. I wanted to pick up a 9mm Glock drum to complete the look.

Can anyone recommend a nice Glock drum magazine?




Rolan Kraps
SASS Regulator
Gainesville, Georgia.
NRA Range Safety Officer
NRA Certified Instructor - Pistol / Personal Protection Inside the Home
 
Posts: 23581 | Location: Gainesville, GA | Registered: October 11, 2005Reply With QuoteReport This Post
Fighting the good fight
Picture of RogueJSK
posted Hide Post
I have yet to hear about any that are 100% reliable. But some might be good enough for a range toy.

But because of the way the Glock drums have the elonged neck to fit inside a full-size Glock grip, a drum mag hangs pretty far down below the PC9.





Therefore, it doesn't really look much like a PPSh 41:



If anything, it's somewhat closer to the PPD 34/38 look:



Only with a drum magazine more like a MP18:
 
Posts: 33291 | Location: Northwest Arkansas | Registered: January 06, 2008Reply With QuoteReport This Post
Go ahead punk, make my day
posted Hide Post
Yeah Ruger ain't got any PPSh ruggedness IMO>
 
Posts: 45798 | Registered: July 12, 2008Reply With QuoteReport This Post
Bolt Thrower
Picture of Voshterkoff
posted Hide Post
The ruger pistol mags are steel right? You could cut one down, grind the feed lips off a suomi drum, and weld them together.
 
Posts: 10070 | Location: Woodinville, WA | Registered: March 30, 2004Reply With QuoteReport This Post
Member
Picture of xl_target
posted Hide Post
I think it looks a lot better than the original.
 
Posts: 2322 | Registered: January 15, 2009Reply With QuoteReport This Post
I'm not laughing
WITH you
Picture of Rolan_Kraps
posted Hide Post
Well, if you squint and hold your head just right it isn't terrible. The important thing is that I am happy with it. I'm going to pop some rounds after I knock off work.

Photo Jun 04, 4 56 09 PM by Dave Steier, on Flickr


Photo Jun 04, 4 54 26 PM by Dave Steier, on Flickr


Photo Jun 04, 4 54 43 PM by Dave Steier, on Flickr

Photo Jun 04, 4 54 36 PM by Dave Steier, on Flickr




Rolan Kraps
SASS Regulator
Gainesville, Georgia.
NRA Range Safety Officer
NRA Certified Instructor - Pistol / Personal Protection Inside the Home
 
Posts: 23581 | Location: Gainesville, GA | Registered: October 11, 2005Reply With QuoteReport This Post
Member
Picture of kimberkid
posted Hide Post
I like it!
I also like the idea of mod-ing a PPSh-41 drum with a Ruger mag ... It looks a bit odd with the long neck.

In the end, your money, your gun; your satisfaction is all that matters!


If you really want something you'll find a way ...
... if you don't you'll find an excuse.

I'm really not a "kid" anymore ... but I haven't grown up yet either Wink
 
Posts: 5725 | Registered: January 11, 2007Reply With QuoteReport This Post
I'm not laughing
WITH you
Picture of Rolan_Kraps
posted Hide Post
All I had for sites were a cheap Chinese knock off. I am waiting for a nicer set to arrive. Because I don't know WHERE it is shitting now. No where close to pint of aim, I'll tell you that. I need to get it to the range and put it on a BIG piece of paper.

I've also ordered a sight rail to go where the rear site was mounted.




Rolan Kraps
SASS Regulator
Gainesville, Georgia.
NRA Range Safety Officer
NRA Certified Instructor - Pistol / Personal Protection Inside the Home
 
Posts: 23581 | Location: Gainesville, GA | Registered: October 11, 2005Reply With QuoteReport This Post
Member
Picture of Sea Bass
posted Hide Post
I like it too! More than a passing resemblance IMO!
Thanks for posting.
SB


"Shohna ba Shohna - Shoulder to Shoulder"
 
Posts: 1648 | Location: Knox/Etown KY | Registered: June 08, 2006Reply With QuoteReport This Post
Glorious SPAM!
Picture of mbinky
posted Hide Post
I like it.
 
Posts: 10640 | Registered: June 13, 2003Reply With QuoteReport This Post
Member
posted Hide Post
Roger is offering a new model with a similar PPSH look to it.

https://ruger.com/products/pcC...pecSheets/19115.html
 
Posts: 94 | Location: SW VA | Registered: January 25, 2010Reply With QuoteReport This Post
Member
Picture of fnforme
posted Hide Post
I love it! A modern twist on an old classic.
 
Posts: 3419 | Location: Miami, FL | Registered: April 11, 2003Reply With QuoteReport This Post
Member
Picture of myrottiety
posted Hide Post
Looking good. Ruger Burp Gun!




Train how you intend to Fight

Remember - Training is not sparring. Sparring is not fighting. Fighting is not combat.
 
Posts: 8962 | Location: Woodstock, GA | Registered: August 04, 2005Reply With QuoteReport This Post
Still finding my way
Picture of Ryanp225
posted Hide Post
I love it! Watch out for zee Germans.
 
Posts: 10851 | Registered: January 04, 2009Reply With QuoteReport This Post
Member
posted Hide Post
Got out for a walk today and shot 4 ground squirrels with the Ruger "Burp" gun.



This thing will do for our future stock killing. Very handy tool. Cheap ammo. More decisive than a .22.

Back in the 1880-1941 era there existed a class of firearm of which this thing is certainly representative. Lots of .32 Rimfire and centerfire rifles were used for hog, lamb and steer killing and general all-round utility use on the farm. Here on my ranch once we get away from the house we need something that reaches out a bit farther, but right up close to the front door and in the kill corral, this thing will get the nod every time.


**********************
53 Jesus said to them, “Very truly I tell you, unless you eat the flesh of the Son of Man and drink his blood, you have no life in you.

Read Quod Apostolici Muneris (1878) LEO XIII. This Pope warned us about the Socialists before most folks knew what a Socialist was...
 
Posts: 5059 | Location: Idaho, USA | Registered: May 20, 2005Reply With QuoteReport This Post
Fighting the good fight
Picture of RogueJSK
posted Hide Post
Looks like Rolan wasn't the only one who wanted a Ruger PPSh-41...






Link to original video: https://youtu.be/VMHFQBicRt4
 
Posts: 33291 | Location: Northwest Arkansas | Registered: January 06, 2008Reply With QuoteReport This Post
Web Clavin Extraordinaire
Picture of Oat_Action_Man
posted Hide Post
I love the ingenuity of the gun community!


----------------------------

Chuck Norris put the laughter in "manslaughter"

Educating the youth of America, one declension at a time.
 
Posts: 19837 | Location: SE PA | Registered: January 12, 2001Reply With QuoteReport This Post
  Powered by Social Strata  
 

SIGforum.com    Main Page  Hop To Forum Categories  Mason's Rifle Room    New project: Ruger PPSh-41

© SIGforum 2024